Develop Bugs

Final BT Patch from i-mate available!

http://www.clubimate.com/index.asp?PageAction=DEVICE_PDA2K_BT
Lets see how it goes! Under my BT module versions everything is now 1.0.0.3500 except BTPluginManagerCE.exe which is 1.0.0.1

Can someone post it on the forum
I don't have an club i-mate account. Can you PM me the patch?

Can a PDA2k owner with access to Club iMate PLEASE post the patch here, so that everyone with a Blue Angel device can benefit?
Thanks!!!

Jabra BT 250 with stack v 3500
Did anyone try his headset with the new Bt stack ( .3500 )? I want to buy a Jabra Bt 250 but I had a very bad experience with the old BT software. Can someone verify me that it works without problems now?

BT Stack 3500
I don't have an club i-mate account. Can you PM me the patch?
Thakns!!!

Any O2 XDA2s owner tried the patch out yet?
Regards,
RajeshR

BTW, the patch has been posted by someone else at:
http://www.blueridge.net/dereck/bt/
RajeshR

Bluetooth
Excellent-solved everything !!

If anyone has the guts to try this on the Sprint device, please post. Unfortunately my balls aren't big enough at this point.

some guy in another forum 'claimed' it hosed his sprints bt, and he had to restore.

i tried it on my qtek 2020 but it also freezed it & i had to restore, i extracted the files & tried them 1 by 1 untill found that wavedev.dll cuases the freeze if this file is removed it installs it but still can't get it working, any thoughts guys?

I insatlled it on my PDA2k. Now, it works fine with my O2 clip bluetooth headset. I am quite happy for the fix beacuse I can use my BT headset at last.

Guest,
Have you heard the phrase "use it or loss it"? We'll if your never f**king around your balls will never grow, they'll just shrivel up and fall off completely. So go get your self some action!
Later,

Your guinea pig reports - installing this on a O2 XDA IIs. Here are the steps I went thru.
- Put the cab file on to my SD card.
- I soft reset the unit before went on.
- Once it's restarted. I execute the file under file manager.
- Files install rather quickly. Today screen looked a bit mess up.
- Soft reset again - everything looks normal again.
Overall - Bluetooth suprisingly seems response and start up much quicker than before. Bluetooth version went from 1.0.0.1900 to 1.0.0.3500.
First test - wake up by itself - I turned off the unit with bluetooth on (headset enabled). I waited 15 mins and it no longer turning on itself.
Second test - Out of Memory error message - I started up 7 programs in the background before turning on bluetooth. No more out of memory message!
Third and final test (to be done) - Bluetooth and WIFI together.
Cheers

Mine doesn't install after I copy to my SD Memory. Anyone can advise/help.
Thanks a Million
Btw, do you mean using file explorer to execute files & which file to execute?
yatlee said:
Your guinea pig reports - installing this on a O2 XDA IIs. Here are the steps I went thru.
- Put the cab file on to my SD card.
- I soft reset the unit before went on.
- Once it's restarted. I execute the file under file manager.
- Files install rather quickly. Today screen looked a bit mess up.
- Soft reset again - everything looks normal again.
Overall - Bluetooth suprisingly seems response and start up much quicker than before. Bluetooth version went from 1.0.0.1900 to 1.0.0.3500.
First test - wake up by itself - I turned off the unit with bluetooth on (headset enabled). I waited 15 mins and it no longer turning on itself.
Second test - Out of Memory error message - I started up 7 programs in the background before turning on bluetooth. No more out of memory message!
Third and final test (to be done) - Bluetooth and WIFI together.
Cheers
Click to expand...
Click to collapse

peterpeh said:
Mine doesn't install after I copy to my SD Memory. Anyone can advise/help.
Thanks a Million
Btw, do you mean using file explorer to execute files & which file to execute?
Click to expand...
Click to collapse
Copy the .cab file to your SD card; use File Explorer to find it on your SD card and click on it. It should start executing and will install the patch for you.
Regards,
Rajesh

you can also install in my docs, double click on it from the XDA screen and it will install. After install it will delete the cab file from 'my docs'

Dear all,
Is the patch compatible with XDA II running WM2003SE?
Thanks

Ken_xda said:
Dear all,
Is the patch compatible with XDA II running WM2003SE?
Thanks
Click to expand...
Click to collapse
nope my above was on 2003 SE

Bluetooth
I installed this on an Orange M2000, no probs with the install and now my SonyEricsson BT car kit works fine. No Bluetooth memory errors yet!
Really impressed so far (fingers crossed).
Hopefully Orange and O2 will release it formally ASAP.

small help with o2 rom

hi all
I have flashed my Qtek 9000 with o2 rom and all works fine. but I have noticed one problem which is when I chose the basic defullt setting of the O2 the Bluetooth wont received and cant be descoverd even if the bluetooth is on and there is a tick on make the divce discoverable.
However, when i chose the Corporate setting of the O2 and the code 0506 the bluetooth works fine sending and receiving. Any thought of why is this problem happing ?
Thanks

I think there is a BLUETOOTH PATCH included in the Extended ROM. Maybe Corporate mode installs it, but Basic no.
Can you Install Basic mode and try to run the file from the extended ROM? It might look something like this:
Default_Signed_SSD_BTUR_Patch_For_BT_Cannot_Initial.sa.CAB
I'm not sure. Goodluck

thanks brother still facing the same problem

Is your Bluetooth Problem in regards to connecting to Hands Free Headsets? Or transfereing files, etc.?
What exactly can't you do with the Bluetooth in Basic that you can do in Bluetooth of Corporate?

thanks Jorgee
i managed to solve it by going back to the old o2 rom
it was file transfer problem
:wink:

You have to have the BEAM option in CONNECTIONS enabled to be able to transfer OBEX Bluetooth

WM6 and sapsettings (bluetooth)

Hi, i've upgraded my Tytn succesfully to WM6 Black Edition, works like a charm, great performance (better then WM5) only one major problem is that i cannot activate Rsap with "sapsettings" that doesn't seem available. I've downloaded the "ActivateMSBluetoothSAPProfile.cab" from another ROM but that gives an error.
Is there a ROM that has "Sapsettings" in the programs? I'd install that one then.
Any help is appreciated. Thnx.

Hi, I've had the same problem after upgrading my Hermes 300 to 3DES.3
I was missing the SAP or rSAP, which I needed for my Passat.
I found an OEM package here: http://wiki.xda-developers.com/index.php?pagename=HTC_Universal_WM6_Kitchen_Helmi
and downloaded the btsapprofile (direct link: ftp://xda:[email protected]/Uploads/Universal/helmi_c/Kitchen_OEM/btsapprofile.v1.45.rar)
Extract the content of this file to your PC. Copy SAPSettings.lnk to \Windows\Start Menu\Programs on your phone.
Copy SAPSettings.exe.0409.mui, sapsettings.htm, SAPSettings.exe, SALib.dll, BtSim.exe to \Windows on your phone.
Go to Programs on your phone - you should find a working link to SAP settings.
This did the trick for me.
Cheers - mgruett

You are my hero! Works 100%. Thank you!

While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
http://forum.xda-developers.com/attachment.php?attachmentid=29801&d=1155792304
tested it on 2 Hermes with WM6 and it works flawlessly.

rSAP with TyTN, s620 and Wizard
Hi,
when you're saying "100% working" and "works flawlessly" do you mean you have the Icon in your program folder or is it really working well with your car-kit ? Make phonecalls, Syncs phonebook etc. ???
I've a carkit from THB (bury) since ages in my car and upgraded the phone holders from old nokias up to the LT9100 with rSAP. As rSap pops up, I was 100% sure that this is the solution I'm looking for.
Since 6 months now, I try to get that damn thing working. It always fails with "Sim Card missing / not found". I could pair, it connects to the phone, disables the phone-module, but I couldn't dial a number, nor could I sync the phone book.
I tried it with Blueangel, Wizard, TyTN and my brandnew S620 without succes. I tried it with PPC 2003, WM5 and WM6 Roms, no chance. Of course, I followed the hints in the forum.
I sent the carkit to Bury to upgrade to the latest firmware and guess what ... nothing, always the same problem with Windows Devices, but my Nokia 9300 connects well in a second.
So, bottom line, I'm not sure if it is a Bury Problem with a bad rSAP support for WM or a WM Problem as my Nokia connects well.
Any thought or tipp is highly appreciated
Thanks
Chris

I just tried the download from WDawn (thanks incidentally) and aside from it resetting my background to the windows default, worked just fine. Enabled SAP, gave the phone a poke up the rear and tried it on a Nokia 616 car kit. This car kit uses SAP if available, otherwise falls back to HFP. It quite happily connected via SAP. Next text with be the Mercedes Bluetooth module, which would have to be the fussiest car unit I've ever come across and it only supports SAP (no HFP, HSP.. or other fall back).
The phone used is a DoPod 838 Pro running the newly released official WM6 ROM. I never had this success with the cooked LVSW ROMs that I used in the past.
Alex.

Progress but still troubled
WDawn said:
While looking into this issue i found anothern, maybe easier solution together with my collegues (same problem here, for the VW Passat fleet)
Just open this file, unrar, copy .cab file on your Hermes, execute, softreset and off you go.
forum.xda-developers.com/attachment.php?attachmentid=29801&d=155792304
tested it on 2 Hermes with WM6 and it works flawlessly.
Click to expand...
Click to collapse
Hello!
I have a HP Ipaq 914c and having troubles connecting with the VW Passat.
Here are the steps that I have made so far. Any help will be much appreciated.
1) Initialy on the VW menu searched for BT phones. Detected mine but whenever I selected it, returned back with the message: "Phone not compatible"
2) Dicovered here this tool BTSAP_Test, installed on the Ipaq and activated the "Remote SIM Access" checkbox button
3) VW now is able to pair with the phone (after inputing the 16 code number) but immediatly after pairing says that "Bluetooth is not activated on phone" ...
4) Looking on BT devices in IPAQ I can now see a device named "VW UHV PREM", but the only available service to use for this device is "Dialup Networking".
Am I missing something ? Thanks.

Bluetooth Audio problems

Hello all, well recently I bought some Sony DR-BT20NX headphones under the impression they were the best, so onto the problems:
I'm using leos latest 0.5AKU WM6 Rom and when using them with the default Rom the bluetooth headset can control the music that is pause etc but the music plays for 1 second if that at the beginning of the song then its interference. Any ideas?
Using the Broadcomm stack included in the Rom that you can install after seems to sortany bluetooth problems involving audio but destroys the GSM and the radio crashes 9/10times on boot forcing a soft reboot.
Secondly I'm using on my PC/Notebook with a "Integrated System Solution Corp." Bluetooth dongle with BlueSoleil software provided, with this im able to control WMP like on my device, but I don't even get the second of audio - its completely dead audio wise apart from a dull hiss.
So after paying £60 I'm none the happier with bluetooth
Any help would be appreciated, thanks!

Ok quick update, bluesoleil version 3.2 fails miserably at audio.
Using 5.0.0.0 now and it works.
Whats annoying is I have to pay for this update because they gave me effectively crippled software.
Ok so thats the PC side sorted, just WM6 to go.
Edit:
My USB stick came with version 2.x of the drivers, and when upgrading to 5.x it says the BDID of the bluetooth is already registered. Duh It came with 2.x, oh damnit now I can't get 5.x. Why would a company not want my money

spicypixel
Have you tried only WMP or other players on your Uni? Try CorePlayer and PocketMusic, they also support AVRCP.
P.S. Using a HBH-DS970, no problems with sound... Only problems with WMP sometimes

Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!

dreamtheater39 said:
Had the same issue....installed Jetware Mobile's Handsfree extension and it works flawlessly!!! I use it on my Jabra BT8010 and its the best buy i've ever made!!
Click to expand...
Click to collapse
Jetware causes skips for me

Skwyk said:
Jetware causes skips for me
Click to expand...
Click to collapse
Do this and it will work just fine -
1. Install JET ware.
2. Start the utility, go to advanced options and check all relevant ones
3. On the main screen, click on "Turn on bluetooth". If it is already Checked, uncheck it and then re-check the option
4. Soft reset (Use PSShutXp or something which does a software reset. do not use the hardware reset button)
5. After restarting, make sure you freshly pair up your headset (Delete the previous partnership on your uni, and also do a factory reset on your headset)
6. Once paired, it should work just fine.
let me know if it works...also make sure you use the latest version (v1.31 i guess)
-San

Import this reg file...
Hi,
Import this .reg file, and it should work fine ;-)
San

dreamtheater39 said:
Hi,
Import this .reg file, and it should work fine ;-)
San
Click to expand...
Click to collapse
will this fix work for a uni with wm5
R 1.09.00
G 42.42.p8
D 1.30.107.wwe
Also if someone could point me towards an explanation
of what these mean cause yes im a nab/nube

Bluetooth - Handsfree Devices!

Hello xda community!
I have a huge problem with my Hermes using Shaps Roms (latest), besides I tried all of the roms till now, and bluetooth devices!
I tried 3 devices till now:
Parrot 3200
Audi UHV
and a Sennheiser VMX 100 ear- handsfree
so first I had problems with the Audi to get a stable BT transmission without disconnect which is solved due to a rom change!
Now the problem is with picking up, or dialing.
For example BT -> Audi UHV connected!
Using phonebook to dial a number -> dialing ... it displays in the Audi -> Dialing.. and when the connection is established its shoud says connected like in phone but sometimes just shows "Hanging up.." -> while the Hermes display says connected!
And I am definitly connected to the person but I cant hear anything not on the phone or the BT Kit!
This is extremly anoying -> and not only withe the Audi, even the simple Sennheiser earphone there is exactly the same problem! or the Parrot!
The phone is not able to send correct "commands" Pick UP -> Connected -> Disconnected. I mean THIS IS A HORROR!
Its not a permanent error but it it shows quite often (6 tomes out of 10 calls) up it does it again and again till sofot reset!
Please someone help me !!!!!
PS i also tried Jetware Mobile same problem no difference ....
Greets,
fire

Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...

CRCinAU said:
Out of interest, try my ROM and see if this works. I use bluetooth dialing on a car kit and it works fine for me...
Click to expand...
Click to collapse
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?

Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.

firefoxy said:
ok, i will give ot a try - first without jhetware mobile and with it!
Is this problem typical or known or just affects me?
Click to expand...
Click to collapse
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.

Hissing Syd said:
I have used a number of Schaps ROMS and others, and I have never had a problem making or receiving calls through my car kit (a Ford).
Having said that, I have had probelms getting the car kit to access my contacts on most of them, but Schaps latest ROM worked 'straight out of the box' in every respect.
Click to expand...
Click to collapse
interesting.. so if you dial a number the tytn sends to your ford the correct status of the calling process ?
start - call - stop ?
never had such issue:
Ford: start - stop
Hermes: start - call ...
silence on both ?

CRCinAU said:
Not to sure - although I install a certain version of the BT kit that may affect your issue. I don't know if it will fix it, however I would be interested to see your results.
Click to expand...
Click to collapse
First results:
15 minutes it works like a charm - no phonebook entries just the plain rom.
now I ll snyc with outlook and start another test!
* Stange thing is that the Audi UHV found my phonebook entries although i dind´t snyced them. Sim is empy ...
can there be something in extended rom ?

Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?

CRCinAU said:
Sounds like it uses BT SAP to access the contacts on the phone. I haven't built the ROM with that in it - as I haven't until now come up with a device that actually uses SAP!
Maybe try doing a search to see if you can find a cab for BT SAP and see if that helps?
Click to expand...
Click to collapse
First of all thanks for all the replies!!
The Audi UHV is capable to use rSAP, but I have no idea what it does and what it´s good for.
What is the difference between SAP and HFP ? I have nothing on the sim card.

Now you're getting a bit beyond my knowledge as I don't have any of these systems to test or experiment with

+1
I have had the same problems with multiple ROMs.
Trying to link a Garmin GPS, and other Hands Free devices.
Seems like a Hermes thing rather than the ROMs.

Try deleting the BT device from the Hermes, but not the device. Re-sync from the device.
Not sure if that will help, but I had weird BT problems with the 4.30 rom and that fixed it. No problems at all with the 4.31 though.

I will start some testing today and report back tonight!
Maybe it was the rsap being enabled in Shaps roms .... we will see!
The question is, should I install Jetware Mobile or not ?
It seems to be faster in syncing if I have it installed.
So far I tested it yesterday for half an hour and it worked!