Develop Bugs

BlueTooth manually updated on PDA2k to 1.5.081

http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.

Still testing..but handsfree is a bit sporadic in terms of connecting.. still issues with the headset profile. Doesn't always connect. Turning on and off bluetooth seems to work better.. have not seen any driver memory issues(and that is turning on and off unit along wiht turning on and off wlan/bluetooth).
Quite a few times, I had to press the button on my HB-35 to connect the voice portion after it dialed. The PDA2k reports that it is connected to the HB-35, but doesn't seem to transfer the voice call over. After pressing the button on the HB-35, the voice transferred over... Will continute to play around with it...

Any update firbird and guest? What devices are you connecting to the PDA2K?
BT Headset, Model?
GPS, Model?
Car Kit, Model?
Keyboard, Model?
Wife, Model?
I want to control everything, yes, the dog included!

To clarify, I wanted to control the dog AND the wife, I didn't mean the wife was a dog!

Sorry.. been a bit busy lately... anyway.. as for an update.. I had more problems with the headset than with the previous 1.0 driver version... as for driver memory errors.. it seemed that I got them less frequent with the 1.5 driver.. but i still got it once in a while.. There's another thread in the forums here where I mentioned that it might not be entirely the driver but the way good old MS handles its memory allocation for drivers... the PDA2k isn't the only one with these issues.. the XDA IIs, the 6300 series.. even the older ipaqs.. the driver memory thing pops up all over the place where bluetooth is involved...

I had the xda II for 9 months and never saw the driver memory error msg, in fact it was perfect.

do it runs on pda2k ?¿?¿?¿
Thanks

TOMTOM 5 shows no keyboard on screen ???

I installed TomTom 5 on my qtek 9090 and when I choose navigate to address there is no screen keyboard. I think it detected the external keyboard and therefore is not showing it.
Anyway to get the screen keyboard working ?? :?:

:idea: Try the following...
In register of PDA..
HKEY_CURRENT_USER\Software\Microsoft\Shell
Change..
HasKeyboard value from 1 to 0
To get to the register u can use the following app.
Registry Workshop from http://www.torchsoft.com
Install this on your PC and use file / Connect to register of mobile device
(Active sync must be connected to the device
Good Luck!

No luck
Didn't work
Changed > softreset >no keyboard
reinstalled >no keyboard

tt 4.4
I have the same prob with TomTom 4.4 and my Qtec 9090.
Hope someone comes up with a fix.
How is TT5, I was waiting to see if it was a lot better than 4.4 or much the same.
No I dont have the prob anymore. Changed to 0 rebooted and changed to smaller keybord in TT 4 and there it was.
Thanks DVB works fine and just in time for a 4 day weekend driving around up nth Holland. :lol: :roll: :wink:

How the HELL did you get TomTom Nav 5 so quickly?!?!?!
The upgrade was only released yesterday.
PLEASE EXPLAIN!!! :shock:
lydiachris

DVB4Free said:
:idea: Try the following...
In register of PDA..
HKEY_CURRENT_USER\Software\Microsoft\Shell
Change..
HasKeyboard value from 1 to 0
To get to the register u can use the following app.
Registry Workshop from http://www.torchsoft.com
Install this on your PC and use file / Connect to register of mobile device
(Active sync must be connected to the device
Good Luck!
Click to expand...
Click to collapse
This worked for 4.4, but not for the new 5 version.

I have made those changes and anything doesn't work....

has somebody been able to troubleshoot it??
greetings

Me too, Im gonna have a poke around and see if I can throw something into the mix.
:shock:

lydiachris said:
How the HELL did you get TomTom Nav 5 so quickly?!?!?!
The upgrade was only released yesterday.
PLEASE EXPLAIN!!! :shock:
lydiachris
Click to expand...
Click to collapse
Check the newsgroups :wink:

I have the same problem with TT5.
I have asked the fench support of Tomtom and they replied to me that there was no issues for this at that time.
It is due to the fact that tomtom developpers have made the choice to consider the QTEK 9090 or similars like a Keyboard PPC (like HP6500 or Treo 650) to limit the number of version... that's what they said ... :shock:
As the QTEK 9090 do show a virtual keyboard on Street Number search or on reg screens and not on Town or Street name sreens, i do think that there is actualy a bug on QTEK 9090. It is also disapointing to try to type a poste code search with the hardware keyboard as when i press the "Fn" key i got a nice "Ñ" or when i press the "Shift" i got a "Ò"...
I think we should send a lot of request to the Tomtom support to have a chance to see an update in a future relaese (It could be an option whithin the parameters for exemple...)
...

Hi,
It was even worse in my case (I upgraded my Rom 1.22.556 to 1.40.553 since release of new Dutch retail a few days ago):
- As already mentioned the Registry hack (see reply from DVB4Free) works only for 4.4 version and not 5.0. I am still looking for a work-around to get my on-screen keyboard back while I wanna type a location/street to navigate to.
- Despite the fact I am using TomTom bluetooth receiver, I can't get my Qtek9090 connected to TomTom as long as I select the TomTom BT icon in wizard interface. After a lot tries I figured out that it only works if I select the 3th Icon (general bluetooth receiver) and not the second icon (the small silver color TomTom BT receiver). Isn't this odd?
- My 'Navigate To' item in Contacts popup menu is gone for good. It was working on TomTom 3.07 (and even on 4.4 so far I can remember). But since upgrade to v 5.0 I can't navigate to someone's address from my Contact list.
regards,
- Avareh

on screen keyboard
DVB4Free, dude is there nothing you can do to fix this problem? I tried it on TomTom 4 and it worked fine, after altering the key from 1 to 0 it worked. I have an XDA 2s and now I've just installed TomTom 5 I can't navigate to anything!
Cheers!

Anyone had any luck with this yet?
Peter

Success!!!
pscomp said:
Anyone had any luck with this yet?
Peter
Click to expand...
Click to collapse
I have found that if you download the Great_Britain.postal file the Fn & Shift keys work ok so you can enter numbers
And also the added benefit of 7 digit postcodes, not sure about ppl who cant find a postal file for their own country though. But it worked for me so give it a try...

pscomp - I am new to all this :shock: , but just got tt5 and I also have a MDA III. Can you explain what you did to get the keys working.. Thanks in advance...not sure what you mean about the download etc...wherefrom and where too?

Hi,
I can't remember where I downloaded the file from. Ive tried to upload it but I think the ftp is down :? . But it looks like it may be here ftp://ftp.xda-developers.com/Blueangel/
All you do is create a folder called zip on your SD card and put the file in there. That is assuming you are using the Great Britain Map. I will keep trying to upload the file though.
Hope this helps you

Yay, got the file uploaded.
All you should need to do is download the file, unzip it and then stick it in the zip folder on your SD card.(That is assuming you are using the Great Britain Map)..
ftp://xda:[email protected]/Uploads/
The file is called GreatBritain.zip

ekapco said:
I installed TomTom 5 on my qtek 9090 and when I choose navigate to address there is no screen keyboard. I think it detected the external keyboard and therefore is not showing it.
Anyway to get the screen keyboard working ?? :?:
Click to expand...
Click to collapse
same happens to me when I install 1calc

I bought a new TT5 UK BT kit that arrived yesterday.
I (obviously) have the ZIP file on the SD card and I still don't have an onscreen keyboard. The odd thing is, I'm pretty sure I did have an onscreen keyboard during the installation, as I used it to enter my "home" location.
I've logged a bug report with TomTom, if they come back with anything useful I'll let you know.
Q.

XDA2s Will not beam files by bluetooth!!!

I have had an XDA2 for sometime. I have just purchased a XDA2s but can not get it to beam a file, like on the xda2. I go to file explorer, hold down on the file I want to send and hit beam file. The page says searching but does not ever find any devices!!
I have upgraded the Radio ROM upgrade to version 1.12.00 and the Bluetooth upgrade to version 1.0.0.3900, but I still have the same problem. Is anyone else with an XDA2s able to beam files like with the xda2, or have any ideas why it is not working?
Thanks

hey same here too
hi
i too have the same problem and i dont even know on which windows m i Running my PDA ??
Can some one help me how to find which windows have been installed on my XDA IIs

if you have installed the 3900bluetooth stack, then you must forget about the beam option, when u tap and hold within file explorer, tap send by bluetooth instead of beam file, this will work as i had same problem, and i was told this by members here.
hope this helps.......

my way of beaming files via bluetooth is to open the bluetooth manager and select "new" then click on "browse files on a remote device". After that, bluetooth devices will be discovered by your BA. Once the devices are already listed, you could select to which device you want files to send to...
hope this helps...
cheers!

Guys, you're talking about two different things here. When you choose 'beam file' that means trying to send it to another device using the infrared port, not Bluetooth.
It says it can't find other devices because on your receiving device you've probably turned Bluetooth on, but not IR. And even if you had, you're supposed to align the IR ports and keep the two devices pretty close to each other. On your BlueAngel, the IR port is on the left side so you have to turn it.
You should either choose 'send via Bluetooth' if you want to send something via Bluetooth, or choose 'beam file' if you want to beam it via IR. Check if your receiving device has Bluetooth or IR capabilities and has these switched on; if you're using IR, point the device's IR ports to each other.
Your Windows version:
Start -> Settings -> System -> About.

Thanks
Thanks all of you
I just Cant belive that i couls see a reply posted so so soon
A million Thanks
and ill do keep a check on the forum

bluetooth not in my menu
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now

no bluetooth sending on SPV M2000/XDAiis...
Robrecht: they are not talking about two different things, to beam a file it "should" pick up all incoming beams including bluetooth, if you try beam a file a menu will come saying two things:
1) infrared - align ports
2) searching...
Now the "searching" means its looking for bluetooth devices, provided you have activated "recieve all incoming beams" in beam settings...
Unfortunately although i know how it all works, i also have the same problem with my SPV M2000, i also cant send via bluetooth,i had the XDAii and that worked totally fine, the only way to do it on the M2000 is through exploring another bluetooth device, but not all devices allow for that...its such an easy operation that has become so difficult, i mean if thats how they have programmed it, it sucks ass, even old crappy phones with bluetooth can send files easier...
i think it is a problem and if there is any solution can someone let us know...
regards...

Re: bluetooth not in my menu
spread_smiles said:
Hey jojo
i have not got send via bluetooth on my menu in the FE
also i dont know the bluetooth stack ???
how do i get that now
Click to expand...
Click to collapse
go to bluetooth in the settings/connections. then in bluetooth, and tap 'about'
this will prob show 3500version, it needs to be 3900.
you vcan get this i think from this sites ftp, but i cant remember how to access that, but i got mine off google, dunno what site, but google is ur friend, search for bluetooth upgrade 3900* u will find it.

or even better, look here,
http://forum.xda-developers.com/viewtopic.php?t=18215

BT3900.....?????
I've heard alot of good and bad remarks about bt3900 series.... Im running an SPV M2000 on windows 2003 second edition, will upgrading my bt3500 to bt3900 solve my sending via bluetooth option(or beam file option)?????

I GOT IT BUT ...
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!

Re: I GOT IT BUT ...
spread_smiles said:
thanks JOJO
but when i clicked the link i got to download 2 BT stack but when i unzip it it just would not come in one file but split in to 10s and than i am confussed how do i get it all to one ???
how did you upgrade it to 3900
i dont get any cab file
is there any particular software to unzip this file !!
Click to expand...
Click to collapse
you dont need to unzip a cab file, a cab file is the same as a .exe file on your desktop pc,
just copy the cab file accress to a location on your pda, somewhere you know where it is.... lets say you copy over using active sync, into your documents..... when you go into file explorer on your pda, just tap the cab file and it will install ........ and hey presto..... your on bt build 3900
tradivise, upgrading to 3900, should sort your problem out.... sending files from devices to another handset by Ir is something that needs avioding, as i find that even if the pda can detect the device, it aint compatable and will always fail..... i even found this on my old XDA 2
instead on tapping on beam file on 3500 like with the xda2, upgrade to 3900 and you dont need the beam option.... just hold on file and tap send via bluetooth., anything is now sendable but if you want this to help with Ir within the beam option, this wont help as it is for bluetooth.....
happy installing if you choose to....... id recommend it tho!!

it does solve the problem!
joey jojo... thanks, yeh i installed it and it solves the problem, i now have the "send via bluetooth" option in the menu when holding down on a file i want to send, you can almost send anything....there is one thing thats seems a bit odd!!! - when using my bluetooth headset it sometimes crackles a bit even though im within a metre or two of the phone, i dunno, that doesnt seem normal...but i guess for the amount of times i use my headset compared to the amount of times i "wanted" to send files via bluetooth, i suppose i can live with the crackling...
thanks JJ
So i also recomend to anyone having the same problems as me upgrading to bt3900, i mean im not sure about the crackling, i read on another post somewhere that there are a few others with the same crackling problem, but as far as sending the via bluetooth, it solves the problem...

this is good news!
joey jojo, could I ask for one too?
cheers!

bt3900...
you can get bt3900 from this site - http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
It gives you instructions and everything else...
happy installing...

thanks tradivise! one question though, would it be just fine if I wouldn't upgrade may radio rom and just install the bluetooth upgrade, would just do the trick the same?
cheers!

yeh it all workd fine for me and i didnt upgrade my radio...im running radio 1.06.02...

guys, thanks! just installed BT3900 and my BT works better now.

Hey man, thats cool, im glad you got it sorted out...
HAPPY BLUETOOTHING!!!!!!!!

Bluetooth Explorer creates PROBLEMS for TomTom!!!

Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX

On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.

I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?

Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.

herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02

perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx

Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com

SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.

Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.

so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com

Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot

ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.

Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...

Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks

try to check \windows\startup

I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers

u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,

I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?

Help! SIM Access Profile on WM6 not working!!

Hi, I have:
- TYTN with WM6 (latest version from Schap)
- VW Touareg with Premium Bluetooth kit (2007 touch-screen model)
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car kit cannot connect to the phone for some reason.
I'm not sure why, but what I do know is that SAP has worked with a Nokia phone (dealer tested it with me). There, it downloaded its address book. It doesn't do that with my TYTN. I have double-checked all my settings on my phone, it has SAP and bluetooth enabled
So, has anybody managed to see their SAP in action on the WM6 enabled TYTN, and if so did it work "straight out of the box" or did you do something magical that you're willing to share!!!
If it's not working I'll just buy a £40 unlocked Nokia with SAP support and use that, but preferably I'd like to use my own phone.
Thanks for your help!

- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.

WDawn said:
- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.
Click to expand...
Click to collapse
Thanks WDawn,
Well it's promising you got it to work!! (yay!)
But I had spotted your post on the forum, downloaded the file, but the phone refuses to install it. I tried it on the older Schaps version, and I've even updated to the latest Schaps version. Both fail.
This is what happens: when I install in the Main Memory it says I do not have the required permissions, and when I install in the Extended Memory it says that it cannot install. When I tried installing it on the MiniSD card it produces the same as the memory message. I copy and pasted the file from my computer onto my phone, and tried installing it from the MiniSD card. I did not try to install it from the phone's memory itself I am just thinking.
Any idea???
Thanks!! (also thanks for confirming it's only SIM address book, forgot about that one )

To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!

WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
I've heard the handsfree kit yes and it's fantastic, I agree!
Unfortunately, the file still refuses to install . Everything else works. I can install other things without a problem. I've unlocked the phone, checked registry settings (the policies one) and ran various unlockers. That seemed to do something (different security message, or sometimes none) but this particular cab file simply refuses to install.
So I'm afraid and you're right, I'll have to change to the Hypercore ROM... Shame because I liked the way Schap's ROM looks but I will try this because if it's just for looks I might be able to survive with another template
If in the meantime you or anyone else has any brilliant ideas let me know. Otherwise I'll revert this weekend - to let you know whether it succeeded or not (useful for others too on the forum perhaps!).

WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
OK, I've reflashed my phone with Hypercore Lite SE and installed the BT_Test.cab file (which installed successfully) but it's still not working!!
Mind you, my girlfriend and I have the same phone (so 2x TYTN); I flashed hers twice (two diff ROMs), and I flashed mine twice. They are both "found" by both ROMs by the car kit, but once you've inserted that 16-digit security code the carkit gives it is paired but the carkit says it cannot establish a connection.
With both phones!!!!
I know the kit works as it paired with a simple Nokia effortlessly. That's probably because Nokia supplies the technology to VW.
So, unless someone has got a really smart idea, it looks like I'll have to buy a cheap unlocked Nokia 6230 from ebay...
I just find it really annoying you managed to get it to work (good for you ) but that the result is different for me! that's bizarre.
Anyone!??!?!?

Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?

Scrambler001 said:
Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?
Click to expand...
Click to collapse
It's a good point - not yet!
Where can I download this from other than from HTC directly?? I have a T-Mobile Vario II and this does not come with an HTC membership (I've already tried via HTC's website)... Bit stupid really as it's the same device but there you go. T-mobile has no update unfortunately.
Cheers

Ah, I found a working link via the main page...
I'll post back to confirm the result - thanks!

Hope it works for you. If it does then you know it's probably some settings someplace that need tweaking or it could be a prog thats in the cooked ROM that just does not agree with your system configuration.

It didn't work.
After all that hassle of downgrading rom, SuperCIDing etc...
It doesn't work with the original HTC WM6 ROM arghhhhhhhhhhh
Always accepts the 16-digit code but then the "handshaking" stops; it pairs but the carkit "cannot establish a connection". As if it's incompatible, but then some other people managed to get it to work.
It's unbelievable.
Really bizarre
I'm [this] close to buying a Nokia 6230. Grrr.

You can alway put it back to WM5 if it's that important but I know you don't really want to do that. It was a good try though.