Some of you may have noticed that with the newest release of LVSW ROM 3.30.2.1 (2007-05-19) that the old hacks for MS VC do not work getting voice command over bt headset.
LVSW's ROM comes with Cyberon VC but the nice thing is it can be removed via remove programs so remove it and then unpair your headset and turn on/off the phone to start fresh.
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
I take no credit for this program it was done by XCSdM and later modified by ZaJules..
This works perfect for me no other tricks or reg edits zilch, nada, nothing. You might want to set voice command to button 5 though.
I'm using Elfs variant of the newest LVSW and it doesn't come with Cyberon VC and it works perfect for me.
So has it worked for anyone?
I just tried it but it doesn't work for me.
Can you give me some more info like what ROM are you using etc? What headset?
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
GermanGuy said:
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
Click to expand...
Click to collapse
Thats what was suppose to be fixed..Hmm I don't have a cab editor program so I'll have to figure something out..
MrDSL said:
Thats what was suppose to be fixed..Hmm I don't have a cab editor program so I'll have to figure something out..
Click to expand...
Click to collapse
Thank you for your help and the cab, though. I am a happy camper now with MS VC initiation working through my Bluetooth headset
Works!
VC1.6 now works thru the BT (Jawbone). Only notifications still come through the TyTN's speaker.
THANKS!
I just installed wince on a friend computer since my trial is up and checked the .cab I posted and the registry inside does set it to BTVoiceCommand.exe
So the only thing I can think of is maybe someone used the old version. I dunno but it should be correct..
ryanblace said:
VC1.6 now works thru the BT (Jawbone). Only notifications still come through the TyTN's speaker.
THANKS!
Click to expand...
Click to collapse
The notifications have never worked and its a known problem with htc and ms so who knows if a fix will ever be released..
I changed the file name in case others were using a old one or something.
Trying to get it to work on a plantronics headset and it does not work.
Changed path to point to BTVoicecommand.exe so now it does launch the program, but on the handset, not on the headset...
ygeller said:
Trying to get it to work on a plantronics headset and it does not work.
Changed path to point to BTVoicecommand.exe so now it does launch the program, but on the handset, not on the headset...
Click to expand...
Click to collapse
Delete pairing, SR, re-pair and try again. Sometimes that fixes it.
Also note that this is only for LVSW ROM 3.30.2.1 (2007-05-19)..
GermanGuy said:
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
Click to expand...
Click to collapse
I am also a happy camper. I had to make the same registry changes.
I got MS Voice command to work but was realy buggy on my Wizard...I installed Voice Commander over it and works so much better.
MrDSL said:
....
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
...
Click to expand...
Click to collapse
For me works half & half...
Half to the bt and half to the speaker phone...
MrDSL said:
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
Click to expand...
Click to collapse
Yup worked for me. But then it worked for me right out of the packet... but then started doing the I'm gonna ignore your BT headset thingy. This fixed it, pretty much, obviously no notifications , and I still can't persuade the button on my Motorola S9's to launch M$ VC (jus' dials last number). But otherwise, thanks.
BTW
If anyone knows how to get the phone buttom on my S9 headset to launch M$ VC then I'd be very grateful... having to press button 5 atm.
The only ROM I can get this to work on currently is Black Satin on my BT8010..
Schaps latest ROM is a no go :-(
This is working for me with the registry change to btvoicecommand.exe. But I have a strange problem (no, not THAT problem...): the first time I use VC from my bluetooth HF it works fine. If I use it again soon after that (to dial someone else, etc.), it takes 30 seconds to a minute to prompt me for the command. To get it to respond properly again, I have to soft reset, but it still only prompts me quickly once before hanging again.
I'm running Black Satin and VC 160.4622.0.
Any news on BT Notifications?
VC 1.6 on vp3g works fine over BT for me with the above steps, except the known issue with notifications over BT. Has anyone heard any news that a fix has been found for the BT notifications issue? I really hate not having them.
Related
EDIT: It works! Just install the .cab
If you want to use ms voice commander instead just copy voicecmd.exe to \windows\sdialer.exe
BUGS: the control panel applet doesn't work, maybe because we're missing the above, and the record button goes to voice dial
To use just go to a contact and choose add voice tag in the context menu, then go to the programs and choose voice dial or press the record button or press your headset button
Use this one instead:
http://forum.xda-developers.com/viewtopic.php?p=172504#172504
Thanks efjay!
how about the file from this thread? http://www.pdaphonehome.com/forums/showthread.php?s=&threadid=52942
edit: deleted, see first post
Going to try that as soon as i get home, and post some news
Great finding!!
Ok,
Now i have the mic transfered to the bluetooth, just need the button shortcut and the speaker
edit: see first post
Will this work on the Himalaya as well?
Don't know, try it :>
Working great on my 9090! tks!
Hmm, it automatically assigns the record button and we can't unmap it in the buttons applet..any way arround this?
d3vil said:
Hmm, it automatically assigns the record button and we can't unmap it in the buttons applet..any way arround this?
Click to expand...
Click to collapse
Yah i told that on the first post, on the universal they have diferences from press & hold and just press of the record button... and so they can have both of them working, on ba we aren't that lucky
that would be nice :?
well, to bad..at least the app works
ncruz said:
Ok,
Now i have the mic transfered to the bluetooth, just need the button shortcut and the speaker
Click to expand...
Click to collapse
Are you able to send commands from your bluetooth headset? Or is it using the phone mic? When i try saying a command directly into my headset it doesnt work. I use a SE HBH-200
efjay said:
ncruz said:
Ok,
Now i have the mic transfered to the bluetooth, just need the button shortcut and the speaker
Click to expand...
Click to collapse
Are you able to send commands from your bluetooth headset? Or is it using the phone mic? When i try saying a command directly into my headset it doesnt work. I use a SE HBH-200
Click to expand...
Click to collapse
Yes, it works just fine with my motorola hs-810, and the commands are sent to the headset mic
[quote="ncruz wrote
Yes, it works just fine with my motorola hs-810, and the commands are sent to the headset mic[/quote]
Thanks, im waiting for a new iTech headset, ill try it with that.
not working on xda11
hi. can anybody make it work on himalaya device. it doesnt work on my xda11 wm2005 with hsmotorola 820 headset
I want to use windows voice command 1.5. with the Jas Jar. When I try to copy the file voicecmd.exe and rename it to sddialer.exe and try to copy it to the windows folder it says Access is denied. It looks like its in rom. I cannot rename it.
Mike
Mikee4fun said:
I want to use windows voice command 1.5. with the Jas Jar. When I try to copy the file voicecmd.exe and rename it to sddialer.exe and try to copy it to the windows folder it says Access is denied. It looks like its in rom. I cannot rename it.
Mike
Click to expand...
Click to collapse
Take a look at the registry key HKLM\software\OEM\voicecommand
there is a subkey you can change from sddialer.exe to \program files\voice command\voicecmd.exe -- this will allow you to use the BT headset to initiate VC
Thanks ebadger! It worked like a charm! The built in one sucks because it does not have a voice engine.
Mike
wow this looks interesting, i'll play around with this
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
chrisryn said:
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
Click to expand...
Click to collapse
I had the same trouble with MS 1.5 in the AKU 3.3 upgrade and when I went to MS 1.6 it worked. MS 1.6 works fine in the XDA Live rom. I am afraid you may have to upgrade.
SK
I have installed it and It does activate VC but only through the device mic not through the headset. What is strange is that on my Wizard with WM6 VC1.6 worked perfectly straight away.
Can anyone post the Cyberon Voice Dial cab. I would like to try that with my Headset Thanks
Jules
Same here the headset doesn't work but thats no surprise really it NEVER works..
I have even tried the old hack and all it does is crash with an error..
VC 1.6 Required
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Try This
Here everyone, this file got my bluetooth headset to work with VC 1.6 in Crossbow on my old wizard. Maybe it'll work for you, I haven't tried it on the Hermes.
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
eagle 1 said:
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
Click to expand...
Click to collapse
Can you activate VC through the headset though?
drbowden said:
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Click to expand...
Click to collapse
I as well.... i guess it was a bad time to upgrade since i'm going on vacation tomorrow... oh well... atleast AD2P works great with WM6 and my SE 970
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
FU5 KONA said:
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
Click to expand...
Click to collapse
I have the .9f BT VC hack from xcsdm which isn't working...... i have never edit the registry before manually but willing to do it as it looks like the error of the program is that it isn't saving properly..... where can i find the values to change?
You shouldn't have to edit the registry with that fix. The fix is only for VC1.6, which is the only version of VC that is compatible with WM6. Think of it as when you updated to Windows 95, and your Windows 3.11 programs wouldn't all work - you're doing the same thing to your phone .
For the record, I'm running VC 1.6 on the Vanilla WM6 Rom, using the XCSdM patch only.
Heres my fix
Ok I got vc1.6 to sorta work the way I want it to. I upgraded to the widcomm stack and added the btfix hack listed in other thread. I can get vc1.6 to work with ptt button but not headset button. Hopefully this will be fixed with final development of widcomm. Haven't had a chance to check if all notifications come through bt or not.
I had to manually go in and ad a value to the reg in order to get the button on the BT to work as well as using the patch.....this is the setup.....
1. Install VC 1.6 (make sure it is in Main memory)
2. Download Bluetooth Voice Command 0.9f.cab
3. Download BTVoiceCommand.exe
4. Create the Folder \Program Files\Bluetooth Voice Command
5. Copy BTVoiceCommand.exe into this folder
6. Run .9f Hack
7. Go to newly created BT Voice Command config (in Programs) and tick off the check box "Enabled"
8. Set command duration to 30
9. Set or check that the following registry keys are set (I had to manually change Path to BTVoiceCommand.exe.)
10. HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
11. HKLM\SOFTWARE\OEM\VoiceCommand\VoiceCmdDuration = 30
12. HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "\Windows\btagext.dll"
a. (For reference: http://forum.xda-developers.com/show...=283412&page=7 )
13. *Go into the registry and set HKLM\SOFTWARE\OEM\VoiceCommand\ LaunchAPEnable to 1 (I wasn't sure if this was necessary...but it's working now)
14. Soft reset 8525
15. Delete Headset Pairing
16. Recreate Headset Pairing.
17. Set Side button to VoiceCommand
18. Reset Device
Thanks tp BKBrolier for posting this! The red section is what I had to manually add....once added I was flyin high!!!
Good news is coming
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Bravo, xcsdm! Look forward to the update. I have to be sure M$ VC 1.6 will work before I go to WM6.
Ben
VC 1.6 & WM6 Announce Incomming Calls
Thanks for all the efforts working to get VC 1.6 working through BT headsets. I am awaiting my new headset Plantronics 665. However, I have installed VC 1.6 and mainly want to use it for incoming voice notification of person ringing. This always worked out of the box before. I have ticked all the right boxes under settings (Ticked) Speak notifications through device speaker or wired headset only and (Ticked) Announce incomming calls.
The phone rings, vibrates but not VC announcements of incoming call. Thanks for taking the time to read and any ideas/suggestions welcome. Worked perfectly, well most of the time under 1.5?
Tom (Blackburn UK)
xcsdm BT VC 1.6 hack
I don't even get the shortcut in programs and btvoicecommand if I click it it just starts voice command.
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
Thanks for the patch working good so far. Let me know when you get the new btagext.dll done i'll test it for you if need be. Keep up good work.
You are my hero man!!!
MS Voice Command is proving to be a real PIA to embedd into the Rom but We're probably better of not doing that anyway as tere are many who don't user or want it (yeah I know) and even a few who prefer Cyberon's Version....
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
-TXTman can't capture sms
-AE Button Plus broke "end call" key when i remapped it to end programs
-Replacing IE_Short.lnk with task manager command causes internet explorer to open simultaneously with task manager
yeah no threaded sms programs will catch the messages. that's my only gripe right now.
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
aauspitz said:
So far, Blackberry Connect does not work on mine It was a major application for me, if anyone knows how to work around it in the Registry
Click to expand...
Click to collapse
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
countfloyd said:
What part of it isn't working for you? I managed to get it loaded and connected to the network. No emails seem to be coming through for me though
J
Click to expand...
Click to collapse
I've run an Application Unlock on my S620 and I've managed to install Blackberry Connect but, like you, not getting any mail.
I've given up and gone back to the German WM5 rom. After a couple restarts of the device, the blackberry connet top banner doesn't even show up on homescreen anymore!
I'll wait till rim gets their act together on WM6.
J
Hmm...I am going to give this another try.
I realized that I couldn't get emails on my device, even after putting the WM5 rom back on, because I hadn't sent a "service book" from rim's blackberry site. That did the trick. Gonna, reload WM6 and give it a shot!
J
Bah, no luck getting this thing to connect or run reliably let alone get emails...
how do i go back to my original .. windows mobile 5...
if anyone is using WM6 on the Dash...
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
and if it does change it to "headset" automatically could you please tell me if you are able to change your profile to "normal" while the bluetooth headset is still connected
Thanks in advance
streetx613 said:
could you please tell me if they fixed the bug that automatically changes your profile to "headset" when you connect a bluetooth handsfree headset.
Click to expand...
Click to collapse
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
McHale said:
Someone would have to consider that a bug first. I think more than 99% of the people using a bluetooth headset would want the phone to switch to headset profile automatically. Call me silly, but...
-Mc
Click to expand...
Click to collapse
well yeah it would seem that way but when i have my bluetooth headset connected... sometimes i want my phone on silent/vibrate and other times i want it to play sounds, and i hate having to go and edit the headset profile manually to do this, just changing the profile would be a lot more convenient.
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
McHale said:
I use my wired headset to play music then set the profile to normal.
Does this not work the same way when using a BT headset?
-Mc
Click to expand...
Click to collapse
no for bluetooth, you can't change your profile unless you disconnect the headset
I noticed that none of the MSN pre-installed software that was part of WM5(MSN IM, Hotmail access, etc) is on this version. When I attempt to set up my messaging to receive hotmail, I get an error stating: "could not find pmsnlauncher". I've looked around and found a download of the pocketMSN software, but it must be 'activated' for ~$20. It does mention (msn website), however, that if the software is 'pre-installed' no activation is necessary. This leads me to believe that the MSN software is simply not part of the BETA rom.
Anyone else notice this? Any thoughts?
msn is now windows live.
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
uhhh... tpc works just fine for me... i'm using 2.0 beta 4 of tpc, but other versions should probably work as well. make sure your phone is completely app unlocked, or you will have problems. that includes the 0000101b policy entry in the registry.
i'm the creator of tpc, so if you have questions about it feel free to message me.
does "right menu" work on WM6?
Sling player works with WM6 beta
jromney said:
The following applications do not work with this version:
SlingPlayer for WM5 smartphone (Can't connect)
Tornado PowerControl (OMAP errors out)
What applications don't work for you?
Click to expand...
Click to collapse
I found this over at the sling community forum. I can confirm that it Sling player mobile is now working with the install of the DLL only cab auto install.
Use the link below and go to the March 10, 2007 post by wpbear.
http://www.slingcommunity.com/forum/thread/18903/Windows-Mobile-6.0-incompatible/
MS Voice Command 1.6 and wm6 (on a dutch T-mobile compact III) does not seem to work...
Any one has this working? Especially caller recognition over Bluetooth.
I’ve tried "MS Voice Command 1.6 (WM6 working) Download", no succes.
Maybe speed dial is interfering…
Is speed dial a ext rom feature?
It's working! This one
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
and do not forget to start > settings > voice command
Phone > options > Announce incoming calls
Only when I push my jabra BT500 Bluetooth button it opens the phone pad and nothing happens..
Any one know how to open speed dial again with the headset button?
I downloaded this, tried it, it didn't work very well for me, so I uninstalled it. When I tried to go back to using my default Voice Dialing software, all my voice tags were deleted. And the worse part, is that my BT kit does not work correctly now. Some kind of registry edit I believe. This sucks.
can some one post the wm6 default reg settings for:
HKLM
Software
OEM
Voicecommand
Path
I've now:
\Programmabestanden\Bluetooth Voice Command\BTVoicecommand.exe
Here the original
Bman said:
can some one post the wm6 default reg settings for:
HKLM
Software
OEM
Voicecommand
Path
I've now:
\Programmabestanden\Bluetooth Voice Command\BTVoicecommand.exe
Click to expand...
Click to collapse
The default value for key HKLM/Software/OEM/Voicecommand/Path = \Windows\SDDialer.exe
Just wanted to post a follow-up.
Bman said:
It's working! This one
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
and do not forget to start > settings > voice command
Phone > options > Announce incoming calls
Only when I push my jabra BT500 Bluetooth button it opens the phone pad and nothing happens..
Any one know how to open speed dial again with the headset button?
Click to expand...
Click to collapse
I finally got this to work yesterday. I installed it on a new ROM and it works pretty good. In the BT Voice Command prog, I had to disable the XCSdM check box to get the issues with the BT channel staying open resolved. Recognition is fair on the handset but it's very good in the car with the Parrot BT kit which is odd. It used to be just the opposite with 1.5. I can now totally control the phone with the car kit which is great for me because that's the only time I use voice commands.
Only downside is that this program is such a memory hog! I hoover around 15 Megs avg. Only 21 Megs available at startup. I'm just using it normally to see if WM6 will be able to manage the memory well enough so that it doesn't make a difference. I use X-Button too so maybe it won't be a problem, but at the first low memory message, I'm dumping this program and going back to Cyberon Voice Dialer.
It's just nice to use while your switching out ROMs cause you don't have to set up voice tags every time.
I have a fully wired parrot and found it awful. Stationary, great, can dial, start programs no probs. But once Im on the motorway doing anything over 40mph it just will not recognise what im saying. Went back to the build in recognition of the parrot which was flawless
dannyoneill said:
I have a fully wired parrot and found it awful. Stationary, great, can dial, start programs no probs. But once Im on the motorway doing anything over 40mph it just will not recognise what im saying. Went back to the build in recognition of the parrot which was flawless
Click to expand...
Click to collapse
Yea, that sounds exactly the way it was for me with v1.5 on WM2003. Had to be completely quiet in the car for it to work. But now v1.6 seems to work fine. Do you have the microphone ACG disabled? Also, do you have all options unchecked in the BT Voice Command prog?
can anyone post cab for my tp2? thank you
I would like to have this CAB too, missing voicedailing on my TP2
I try this , it work well on mic of phone, but it don't work on BT activate.
CVSD for WM6 v1 2 build 61226 1 cab
http://www.filestube.com/bbd28aaa9252901403ea/details.html
How come the bluetooth does not work? is it due to a setting of the phone, or just not possible? because I installed the voice dailer and it works, however when I try to start the voice dailing with my BT headset it does notting. I have to manually call someone. On the diamond, which I had before this one, this worked flawlessly.
So does anyone know anything about this, or should I use a different tool to use voice dialing with my BT headset?
flux20 said:
How come the bluetooth does not work? is it due to a setting of the phone, or just not possible? because I installed the voice dailer and it works, however when I try to start the voice dailing with my BT headset it does notting. I have to manually call someone. On the diamond, which I had before this one, this worked flawlessly.
So does anyone know anything about this, or should I use a different tool to use voice dialing with my BT headset?
Click to expand...
Click to collapse
yes, I need to know too.
spend a whole day in cyberspace to solve this problem...this is what worked on my Diamond2 (with WM 6.5 ROM):
http://forum.xda-developers.com/showthread.php?t=463090
see #7
Check Registry Settings:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdEnable"=dword:00000000
"LaunchAPEnable"=dword:00000000
Hope it helps!