Hi.
I'm trying to update the rom, but ill get an 262 error, update error. I did the hard SPL before and that was oke.
I also tried different roms.
When it is going to update, it stays at 0% for 10 minuts and after that i'll get the error. Does someone knows a solusion?
When i start the rom update, active sync closes after a couple of seconds and i get a message of windows that there is new hardware found: htc usb sync device and that i can use it.
Now i have not connected the phone i see in the hardware screen of my computer an "!" sign for the "htc usb sync" device
I reinstalled active sync (i use XP), i did a hard reset, tried other usb ports, removed the battery for 15 mins....
problem solved with this topic: http://forum.xda-developers.com/showthread.php?t=409425
Related
Hi mates,
I do apologise if the thread exists already in the forum- i wasn't able to find it. When i try to upgrade updating the bootloader first, my device freeses on bootloading screen (serial or usb etc.0 Now i can reboot my system with a soft given me by a friend, but i can't update. In the middle of the process an unrecognised device error pops up on my PC screen and the updating soft gives me a connection error. Now i followed every instruction i found, i did a hard reset of the device, it's Active Sync synchronized, but the problem persists. Can somb help me with that PLS????
Sometime I've had this error too, usually trying once more was enough for me.
You could also check your USB cabling, like remove any usb-hub if you were using one to connect your device...
Hi all,
I recently tried reverting my PDA to WM2003 (so I can run GoodLink) and the process failed part-way through (my laptop bluescreened). Now my BA won't even get to the boot loader.
Things I've tried:
Removing the battery for 30 minutes+ and reinserting
Hard resetting the device
Removing the battery and plugging directly in to sync station
None of the above work. Is my device truly dead or have I missed something crucial here? I've tried mtty as well and that failed saying it cannot open USB.
Cheers,
ffb
Hey there,
Are you using Windows Vista by any chance?
If you are, use Windows XP, and try reinstalling, your pda is in a "special" mode and awaiting prompt from the updater
Thanks, I'll try that when I get home in a few weeks
Matt
i went to the website
www.asia.htc.com/asia/event/WM6/index.html
and followed the on-screen instruction
what happened now is that there's an update error
i followed the step by step to recover but the thing just stuck there
now whenever i on my dopod d810,
my screen just shows the 3 color screen
and that's that
i dont know what to do!!!
help!
and this is crap
i cant seem to establish a connection AT ALL with the activesync
and whenever i want to update, it just says ERROR [286]
i did ALL the steps it suggested
- disconnect USB cable from phone
- remove the battery
- wait 3 seconds and reinstall
- when you switch on, you see 3 screens
- connect USB cable again
- resume install
and then after i resume install,
SAME PROBLEM again! ERROR [286]
its like a vicious cycle!
Just for your info
i am currently using activesync 4.5
and right now whenever i connect my usb to my phone,
the activesync doesnt seem to be able to detect the phone at all
for those of you who still cares *sigh*
here is the video of my several attempt to upgrade
just download it here
http://www.sendspace.com/file/ha26ws
You might get the replies you ever need in Trinity thread, ask there
I did search and did not get an answer.
smh
well i uninstalled active sync 4.5 and then reinstalled it
i unchecked the usb to pc setting
now i get this beautiful message which i think has to be my problem or one of them
"cannot install this hardware
there was a problem installing this hardware:
htc usb sync
an error occured in the installation of this device
no signature was present in the subject"
the prompt before this one said something about the htc usb not passing windows logo testing and that i should cancel installation but i can go ahead and install but it isn't recommended
im out of ideas
google to no avail
hard reset is no help
clear storage is the same thing
checking the usb to pc setting still doesn't get me through to the actual update process
i only upgraded my att 8525 once with the one on the htc site
new cpu maybe?
smh
sorry, so basically i have been trying to upgrade to mobile 6 since the unofficial official but it would always get to the last prompt and active sync would disconnect and say that the phone isn't connected which was crazy to me because i synced and everything
well after struggling i decided to wait for the official official
lo and behold it is released today and i am having the same problem
after reinstalling active sync and plugging in my device
"htc usb has not passed windows logo testing to verify its compatibility with windows xp
continuing your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future
microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed windows logo testing"
Hi - I updated to the official HTC rom a while ago and can't sync via usb any more. I've tried on vista (64 and 32 bit) using wmdc6 and 6.1 and xp using active sync 4.5. On a new install it see device tries to active sync and dissapears almost instantly then never connects again. no matter how many times i reboot, hard reset, etc... i can not get the computers to see the diamond or active sync it, nothing. I want to try another rom but can't because the usb won't do anything. I can sync and see the device via blutetooth without an issue, it seems just the usb. Any ideas how to fix this or u;pdate the rom with usb? thanks in advance...
Try putting it into bootloader mode.
Then connect via usb, and try a flash