Hello guys!
I have a big problem with my MDA Pro. I was trying to upgrade rom to JASJAR_ME_13082_171_10900_wwe_ship and my device stuck on boot screen. I tried to hard reset but still I have that problem. Then I tried to upgrade again, but when I connect my device to PC with USB cable, it comes popup window that says USB device not recognized and upgrade software can't read ROM version from device. I tryed with mtty software, but I can't select USB under Ports because it's not listed.
I don't know what to do next, when somewhone can help me I would expreciate it. Thanks...
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Try this it shld work
hdubli said:
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
Click to expand...
Click to collapse
Guru Meditation said:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Just noticed your user name, I was a big Amiga fan a few years back, still fire up Amiga forever occasionally on my PC when I feel the need.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Click to expand...
Click to collapse
Try it with a different USB cable or in a different USB port (don't go through a hub and if you've been using a laptop then try it on a desktop PC since some laptops have hubs built into them). If that doesn't work then you're out of luck as your Universal isn't detecting that you've connected to your PC and its time to send it in for repair.
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
i am stuck on the same problem and wondering the forum for almost 3 days now with no luck.... please help my device is in boot loader mood but not turning the serial to USB ......... please HELP.......
solution
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Please follow the steps:
1. Plug in ur usb cable in bootloader mode while it is showing 'serial' and version 'x.xx'.
2. Soft reset by pressing Backlight+power+reset pin WHILE KEEPING THE USB CABLE CONNECTED
3. your phone will now reboot into 'usb' mode. Don't remove the usb cable yet.
4. Remove the Memory card while keeping the usb cable still connected and VOILA,your pc starts recognising your phone as Microsoft usb sync.
5. Do whatever you want to do now (upgrade)
Hope it solves the problem now.
Press thanks if it does.
Something else to try
Having had a few issues with my G3 Uni, I've been through my fare share of Uni bootloader issues. When I find that I can't get the 'serial' to go to 'USB', I normally find it's because I haven't taken the memory card or the SIM card out (usually the memory card).
Make sure your memory card is out, then try to enter the bootloader and see if this cures it. If it does, then use mtty and the command 'set 14 0'
This tells it to reboot on reset. if you were to use 'set 14 1' it would go back to the bootloader on reset.
my Htc hd2 t-mobile won't recognize usb on boot-loader mode
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
kaleb2954 said:
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
Click to expand...
Click to collapse
you have the wrong forum friends! This Htc Universal section
to update Android on HTC HD2, you can use the Clock Work Mod Recovery !! for more details should refer to this thread http://forum.xda-developers.com/showthread.php?t=1021837
I-MATE JASJAR hung
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
bechir2013 said:
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
the first point...
A lot easier than to root this device
Hi,
I've tried to upgrading with 9000_WWE_20202_20307_11500.exe found in this forum, but the notebook power off (bad economic mode also with the AC plugged) at the ExtRam update on 1%, just after the Radio.
But when I tried to re-run the program nothing change, just the bootloader v1.01.
Now the program recognize that there are nothing installed and ask to install all new Roms but after the second screen the utility tell me everytime: "ERROR 114 RADIO ROM UPDATE ERROR"
Somebody can help me?
Since the OS ROM is updated in the last step(to be precise, Step 3), you can easily take your device out of this bootloader mode.
1)open MS activesync on your desktop
2)go to connection settings and disable 'incoming USB connections"
3)run the exe(see the attachment)
your device should be out of bootloader mode.
PS: you can re-run the ROM upgrade again after your device gets back to life
Now my Universal is completly OFF
Hi, thanks a lot for your attention, I trye to follow your instructions but now after the Exit of bootloader, I can't update my Universal.
After read dozens of messages... I try to explain better my situation:
1) the first update was blocked by the power off in my notebook in the beginning on the ExtendedRam (1%)
2) after this I tryed to re-run the update program and this recognize NO ROM on my UNiversal and asking for replace with all new ROM, but a "error 114: Radio Rom update" don't let make the update. (that repeated many time and every time I tryed to reset, cold reset, warm reset... following all the messages that explained many different way to de-block the situation)
3) Now the screen is absolutly black and the PC say me taht the "USB Device Not Recognized"
Can you help-me?
Thanks for all...
I've search and now I've found the way
Thanks for your help, I have come back at bootloader mode and I can put in the wm6 version !
Bye
hi,
I've trie to update my qtek and during the update I've got an error.
And now I'm blocked on the boot loader mode...
I've tried the joined program, I disabled the USB connection,
and the program can't connect to USB...
I don't what can I do.
please help me...
seranares said:
hi,
I've trie to update my qtek and during the update I've got an error.
And now I'm blocked on the boot loader mode...
I've tried the joined program, I disabled the USB connection,
and the program can't connect to USB...
I don't what can I do.
please help me...
Click to expand...
Click to collapse
It's ok, after a reboot of my pda & PC, I can exit the bootloader.
Thks for this program
My Wizard is stuck in the RUU bootloader screen and Windows XP comes up with the error "USB device not recognised".
When I connect to Windows XP the bootloader sceen shows USB at the bottom left but the PC (tried on 2 different machines) shows the above error.
Hard reset and soft reset do not work.
How can I get the Wizard to connect with the PC to perform a rom install or is the Wizard now beyond help ?
forcedv said:
My Wizard is stuck in the RUU bootloader screen and Windows XP comes up with the error "USB device not recognised".
When I connect to Windows XP the bootloader sceen shows USB at the bottom left but the PC (tried on 2 different machines) shows the above error.
Hard reset and soft reset do not work.
How can I get the Wizard to connect with the PC to perform a rom install or is the Wizard now beyond help ?
Click to expand...
Click to collapse
If the phone is already unlocked, plug the phone in the ocmputer. It should say USB on the phone when your on the Tri Colour screen. From that point you should be able to just flash any ROM you want. As long as it says USB on the phones screen, you should be good
No, that does not work beacuse when I run a rom install utility, I get the error (device not found).
If the pc does not see the phone, the flash utility will not either.
Is there a driver that can be installed on XP to force it to recognise the phone when connected to USB ?
Any help with this problem would be a life saver.
forcedv said:
No, that does not work beacuse when I run a rom install utility, I get the error (device not found).
If the pc does not see the phone, the flash utility will not either.
Is there a driver that can be installed on XP to force it to recognise the phone when connected to USB ?
Any help with this problem would be a life saver.
Click to expand...
Click to collapse
Are you unlocking are flashing
What knid of phone do you have
It's the HTC Wizard thats been running WM6 (TNT).
The trouble began when I tried to flash the latest version. The Wizard was recognised and the flash started, but at 0% the USB connection was lost.
Now the PC will not recognise the phone and it's stuck in RUU bootloader screen.
Tried all the USB ports on 2 different Windows XP PC's. Same problem.
Is there any method to get out of this RUU bootloader screen besides the soft/hard reset methods (because they do not do anything) ?
If the phone is already unlocked, your on the bootloader screen and the phone says USB. I don't see why you can't flash any ROM you want. I have never encounterd this issue.
yep, it's a new problem for me too.
Bottom line is, if I can't find a driver or some other way to make the PC see the Wizard. It maybe time to bin it :-(
Mate...I feel for yah, I got the same problem and tried everything. No one has come up with a solution for the phone and the PC to connect via USB when you get this error.
forcedv said:
yep, it's a new problem for me too.
Bottom line is, if I can't find a driver or some other way to make the PC see the Wizard. It maybe time to bin it :-(
Click to expand...
Click to collapse
I dont know much about your phone but can you flash from SD card ?
It might be in the wiki section for your phone
here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
it may be related to a faulty USB cable... or loose USB... i have mine do that sometimes and i have to make sure i do not move the usb once it is active synced!
LOL
Hi.
I'm trying to update the rom, but ill get an 262 error, update error. I did the hard SPL before and that was oke.
I also tried different roms.
When it is going to update, it stays at 0% for 10 minuts and after that i'll get the error. Does someone knows a solusion?
When i start the rom update, active sync closes after a couple of seconds and i get a message of windows that there is new hardware found: htc usb sync device and that i can use it.
Now i have not connected the phone i see in the hardware screen of my computer an "!" sign for the "htc usb sync" device
I reinstalled active sync (i use XP), i did a hard reset, tried other usb ports, removed the battery for 15 mins....
problem solved with this topic: http://forum.xda-developers.com/showthread.php?t=409425