Related
Hi all,
I have this particularily annoying problem that effects my ability to upgrade the rom files on my universal sometimes.
When I put my device into boot mode I don't see USB v1 or even Serial v1, what I get is Serial v2.01
Sometimes when I then connect the USB cable into the universal this changes to USB v2.01 and windows recognises the device and I can perform the rom upgrade. Most of the time however, it stays at Serial v2.01 and windows complains about 'USB Device Not Unrecognized'.
I have tried 2 different USB cables with the same outcome.
Normally after trying s few dozen times I eventually get windows to recognise the universal and perform the upgrade but I have been stuck like this for 3 days now and am getting close to my breaking point which will could shortly result in a broken universal.
Please help.
i cant quite remember the ins and outs but i have faced this problem as well
firstly ensure your connected directly to the computer and not via a hub,
try to do the upgrade if/when you get the message remove the device from the cable and do a soft reset
try the upgrade again and it should be successful this time .
i have had lots of trouble myself with this and i have found a soft reset always gets me there in the end.
goodluck !
I have just retried the upgrade and the display keep changing from USB to Serial about every 10 seconds.
I also noticed that the mouse kept freezing on the screen for a few seconds whilst this was happening. I tried using my other USB cable and the same thing was happening.
Does anyone else have v2.01 displayed on their screen like me?
Update: I stupidly ran Ivan's AKU3.2 upgrade utility whilst the universal was activesynced to my desktop (not in bootloader mode) and now this has executed the EnterBL.exe program which traps you in the booloader unless you upgrade a rom (or use mtty to issue the correct command to escape).
Unfortunately I can't excape via either of these methods as I still can't obtain a USB connection.
I have even tried a different PC but am still stuck.
Maybe both of my USB cables are knackered, so I will obtain another one and try that. If that fails it looks like Orange will be recieving a little parcel from me...
I have now also tried a 3rd USB cable with the same result.
I have a similar problem, I'm stuck in bootloader mode.
I have version 0.60 and if I put a USB in it keeps on saying serial and my computer says he doesn't recognise the device.
I've tried it on 2 different computers as on my new one apparantely all my usb ports are part of a hub. (they come up as all, inluding the ones in my moniter, being part of an usb root hub) But no succes on my other computer either.
I'm thinking that my only option is to do it via a memory card? Can anyone tell me how I'd go about that as I have no clue :shock:
Thanks!
Tim
Success!
I have been plugging in and unplugging my phone all day (with it still stuck in boot mode) and eventually it was recongised by my PC - I then upgraded the radio stack & ce rom and I am up and running again (I know that I could have used buzz's utility but I wanted to upgrade anyway).
The only thing that I did slightly differently this time was that I actually removed the battery from the univeral for a while and then plugged it back in before trying the USB connection. I did try this once of twice before without success though so can't really draw any conclusions apart from I don't know what is going on.
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Try this it shld work
hdubli said:
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
Click to expand...
Click to collapse
Guru Meditation said:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Just noticed your user name, I was a big Amiga fan a few years back, still fire up Amiga forever occasionally on my PC when I feel the need.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Click to expand...
Click to collapse
Try it with a different USB cable or in a different USB port (don't go through a hub and if you've been using a laptop then try it on a desktop PC since some laptops have hubs built into them). If that doesn't work then you're out of luck as your Universal isn't detecting that you've connected to your PC and its time to send it in for repair.
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
i am stuck on the same problem and wondering the forum for almost 3 days now with no luck.... please help my device is in boot loader mood but not turning the serial to USB ......... please HELP.......
solution
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Please follow the steps:
1. Plug in ur usb cable in bootloader mode while it is showing 'serial' and version 'x.xx'.
2. Soft reset by pressing Backlight+power+reset pin WHILE KEEPING THE USB CABLE CONNECTED
3. your phone will now reboot into 'usb' mode. Don't remove the usb cable yet.
4. Remove the Memory card while keeping the usb cable still connected and VOILA,your pc starts recognising your phone as Microsoft usb sync.
5. Do whatever you want to do now (upgrade)
Hope it solves the problem now.
Press thanks if it does.
Something else to try
Having had a few issues with my G3 Uni, I've been through my fare share of Uni bootloader issues. When I find that I can't get the 'serial' to go to 'USB', I normally find it's because I haven't taken the memory card or the SIM card out (usually the memory card).
Make sure your memory card is out, then try to enter the bootloader and see if this cures it. If it does, then use mtty and the command 'set 14 0'
This tells it to reboot on reset. if you were to use 'set 14 1' it would go back to the bootloader on reset.
my Htc hd2 t-mobile won't recognize usb on boot-loader mode
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
kaleb2954 said:
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
Click to expand...
Click to collapse
you have the wrong forum friends! This Htc Universal section
to update Android on HTC HD2, you can use the Clock Work Mod Recovery !! for more details should refer to this thread http://forum.xda-developers.com/showthread.php?t=1021837
I-MATE JASJAR hung
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
bechir2013 said:
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
the first point...
A lot easier than to root this device
As the title states: Why does some computer fail to recognize the Universal via USB on bootloader mode?
I recently reformatted my computer, which I usually do once a year. After installing all my apps back and running windows update on my computer, I installed active sync. Performed a normal reset on my computer, attached my Universal and active sync worked.
Here comes the problem: I decided to roll back to my old AKU 2 QTEK ROM. Of course, I know how to use the Ma_Upgrade No ID file. The problem is my computer now fails to recognize my Universal no matter what I do on bootloader mode. To make it worst, I am now stuck at the bootloader mode with my computer not recognizing it. Any suggestions as to why my computer failed to recognize my Universal?
OK, I was able to get the ROM upgrade going again, by removing my SIM Card and 4GB SD Card. I'll post back if I was able to revive my Universal.
So it seems that my computer failed to recognize my Universal because either the SIM Card or SD Card is causing the conflict.
I had the same problem.... I have two computers one with Win Vista (with the same problem) and another with XP sp1. This computer recognize my pda in boot loader, doesn't matter if still SD card and SIM inside....
Sorry for my english and I didn't tell you a solution...
Hi,
i had the same (very annoying) problems but i always was able to get the Universal back into Windows Mobile.
It was very strange because i started the ROM update and than e.g. it did not go in the Bootloader but back in Windows Mobile so i started it again and than it stucked in the Bl. Hardreset and putting the device again into Bl did not help and i was already very annoyed. I tried to plug in and out the USB-cable but it was always telling me SERIAL and not USB and Windows showed this ****ing popup that one device is not recognized or something like that. I tried a trick to let the cable plugged in USB and than reset and it showed me USB but wheter MA_Upgrade (No ID of course) nor mtty were able to find the device. After several trys and resetting and resetting again i was able to bring it into USB but MA_Upgrade did not work.
The only way to bring back the device from the Bl is the method described in XDA-Wiki (http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen)
The problem is that this method does work only half. I did the steps until the command "set 14 0" and started MA_Upgrade BUT it always told me that the device is not connected, it never worked. I was already frustrated so i did again the reset and what happend? It started back into Windows Mobile!
So what i think that after using the command set 14 0 AND running MA_Upgrade reactivated the start of Windows Mobile. I tried the steps very often because i tried to find a solution for the contacts between WM5 and AKU 3.2 or higher but the only way is to ActiveSync them. This really works and this is for sure the guaranteed way to get (at least my) the Universal back to Windows.
Btw for the people who are to lazy to use the search function:
The damn ROM upgrade does NOT work on Vista until now! Even not with the Windows Mobile Device Connection Center (or how it's called). I tried several steps on the RTM Vista but it never worked. Don't waste your time on it!
So far from my side, i hope these experience will help some people
I Got It To Work!!!
I was so worried. Wheeeeew! Anyway back to normal again. I got it to work.
My observation is: My computer failed to recognize my Universal because I was using Active Sync Version 4.5 Beta 2 to update my Universal. The solution is to completely uninstall active sync using the windows remove program under control panel, and manually deleting the active sync folder from the hard drive. I then installed Active Sync Version 4.1 and all was well again.
So my next question to all the guys/gals who had problems with upgrading their device because the computer FAILED to recognize their Universal via USB is: ARE YOU USING THE BETA VERSION OF ACTIVE SYNC?
Actually when you try to upgrade with SD card inserted - only then you will get this error - I spend so many hours of GOD prays for my Universal - and after that I just remove a SD card and everything is back to normal
agisofttm said:
Actually when you try to upgrade with SD card inserted - only then you will get this error - I spend so many hours of GOD prays for my Universal - and after that I just remove a SD card and everything is back to normal
Click to expand...
Click to collapse
What is the size of the SD Card you are using? Because when a 2 GB SD Card is inserted, it works just fine. But I experience the error with my 4 GB SD Card.
Unfortunately, i don't share the same luck with all of you.
I've already take out both SD and SIM and try thousand times with ActiVeSync 4.1, 4.2 and 4.5 beta, softreset, hardreset, mtty'ing, but what i got? BIG ZERO.
So my pc always recognise my ppc as "Unknown Device" and there is no, even some slim chance, to get it to work.
Any idea for reviving my uni from black slumber of bootloader screen?
Any help would be appreciated.
DuLanTus said:
Unfortunately, i don't share the same luck with all of you.
I've already take out both SD and SIM and try thousand times with ActiVeSync 4.1, 4.2 and 4.5 beta, softreset, hardreset, mtty'ing, but what i got? BIG ZERO.
So my pc always recognise my ppc as "Unknown Device" and there is no, even some slim chance, to get it to work.
Any idea for reviving my uni from black slumber of bootloader screen?
Any help would be appreciated.
Click to expand...
Click to collapse
use MTTY with "task 28 55aa", "set 14 0", "set 14 9, "set 14 10" and "set 14 20" as described. bootloader screen may be replaced with a blank one, boot it on bootloader mode by "Backlight+Power+Reset"
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
now upgrade as usual, then If you stuck on the bootloader again after upgrading, try to upgrade the bootloader itself
go to
http://forum.xda-developers.com/showpost.php?p=1255206&postcount=52
i have done all this... but there is something with vista... they do not recognised it when it is on bootlad screen... what should i do can anyone help me??
moixalakix said:
i have done all this... but there is something with vista... they do not recognised it when it is on bootlad screen... what should i do can anyone help me??
Click to expand...
Click to collapse
Hi, yes you could be bang on in saying there is a problem with vista, my machine did that as well, I really thought I'd turned the phone into a brick, luckily I've got an xp machine that let me connect with the tools that everybody else is talking about here, the one I used was UNI_ExitBootloader.exe (from this site somewhere) which sends all the codes for you and it only worked from the xp machine, it totally failed on the vista machine.
Tried all suggestions, but no luck
So a failed upgrade has left my Uni stuck in bootloader mode saying "Serial" and "v1.00". When I plug the thing into my Windoze XP machine with Active Sync 4.5 one of three things happens seemingly at random:
1. My mouse stops working
2. It tells me that the USB device is malfunctioning and cannot be recognized
3. Nothing happens
In all cases the Uni still shows the same "Serial" message.
The Uni has no SD or SIM cards in it. I have tried hard resetting it. I've removed and reinstalled Active Sync. I've rebooted this windoze pile of crap about a thousand times.
Anyone got any ideas?
Thanks,
Saline
Welcome to forums
Have a read here:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Hope it helps,
Hi. Thanks for the quick reply. Unfortunately I have already tried the suggestions on that page (that's how I found this thread). As I mentioned above, the device has no similar nor SD in it.
Have you tried to reflash from SD card?
instructions on the link on my sig
Sim/App unlocked S621 can't sync or even connect via USB, which leads me to believe the port might be fried (it still charges), or the installed unlock bugged it?
Used P4 XPSP3/Vista 32bit + Dual Vista 32bit on multiple USB ports and device is not recognized on Active Sync 4.2/4.5 + WMDC 6.1 after re-installs and re-boots?
ROM ver 1.19.631.3 - HTC S621
Tried bootloader screen and multiple provider base ROM's with always a "Error [260]: Connection" response. Completed file wipes and 5+ hard boots.
Using a "SpeakOut" (7-11) SIM and have loaded other apps on the device via WiFi/IE but need to be able to access FAT32 for business files and would like to 6.1!
Have searched the previous posts extensively.
Please advise and thanks.
GWN - Great White North.
related:
http://social.microsoft.com/Forums/.../thread/73581fb9-7951-465e-8a82-6cb70fcd22e6/
1) Try changing the cable
2) check if the device socket is clean
3) Try with hard reset
Still no sync?
sergiopi said:
1) Try changing the cable
2) check if the device socket is clean
3) Try with hard reset
Click to expand...
Click to collapse
1) 3 x Cable/USB Port operational with Canon Camera and 2GB generic 1.8" player, file transfer and power. S621 is charging on all three but no access.
2) http://s591.photobucket.com/albums/ss351/40two40888/
Documents cleaning of what was dirty port.
3) Tried 3x hard reset and watched USB ports in EVEREST Ultimate which logged the Camera, the 1.8" and the USB mouse, but no init or i/o for the S621?
Still no sync or device access. Any more suggestions?
FYI - I took apart the S621 to clean and after restart it took 1+ hours for the display to return to normal with no discoloration or streaking. Thought I would have to install a new LCD.
Please advise and thanks.
On a hunch try a different Computer preferably XP with active sync to diagnose if it's an OS problem a USB problem?
Could be just that your computer is not recognizing it, to which then could be corrupted driver.
Start by trying different comp.
stylez said:
On a hunch try a different Computer preferably XP with active sync to diagnose if it's an OS problem a USB problem?
Could be just that your computer is not recognizing it, to which then could be corrupted driver.
Start by trying different comp.
Click to expand...
Click to collapse
Sorry for the delay in response. Used XP machine at a local computer store and returned the same result.
1) Used two different USB cables that would not recognize the S621 but would mount the 2GB generic 1.8" player.
2) XP Device manger returned no activity on the port but the battery charge initiated.
Any other suggestions? Half-brick?
Brief Sync
The S621 briefly synced yesterday.
The battery was down to <20% and when it was re-charged to 100% it was recognized by XP, drivers were installed and it synced with Active Sync 4.2.
Was able to read the directory but it then started to unmount and then mount several times and now the device won't sync or mount again after reboots etc.?
Any suggestions?
Still no sync
Still no sync with XP SP3(re-installed) & Vista.
Any new suggestions? Still charging via USB and adapter.
Thnx
Hi, I have reflashed my ROM I dont know how many times. Yesterday I tried to connect via activesync on a new ROM and it wouldnt connect. These are some of the things that happened:
Device orange charging light flashes a few times then goes off [never seen THAT before]
Activesyc menu comes up on device but activesync doesnt connect
Get 'this device can perform faster' message on desktop
Sometimes get USB devce not recognized on desktop
SOmetimes device orange charging light it stays on if I plug direct into PC but still doesnt activesync
I have tried to connect as DISK DRIVE but I dont see the device on my PC.
Have tried different ROMS, 6.5, 6.51, sense 2.1 and 2.5 but all have same issue. Have also tried connecting to other computers. same issue.
Have played around with USB to PC menu options (enable / diable faster data sync etc) but doesnt make a difference.
Anyone had this problems? Thoughts?
Have you tried diselecting "ask me 1st about usb connection type when I connect the device to the pc" under USB to PC settings
It worked for me
This is the exact problem I am facing!
I tried everything - as diskdrive, activesync (with/without speedup), etc.
On many ROMs, even the original one (WM6.1)
Can't connect - every PC gives an 'unknown device' and on some ROMs I cannot charge via USB, only via mains...
I also tried without the question on connection.
Just some thoughts:
Do you have corruptions on screen sometimes? (Some graphical glitches)
Any .CAB files you cannot install?
Did you try to reflash the same ROM more than once?
tried to connect without card in the device and in flight mode? (Uses less power)
With me it started after a ROM flash from Miri... (I don't blame him!!)
The Hard SPL did not give me any problem, the radio was not flashed, just the OS. But reverting did not help.
I certainly hope you will find a solution, since I have the exact same problem!!
Do you stil know what ROM you flashed when this problem occured?
I reverted to original ROM 6.1 AND 6.5 which included everything - boot, radio, os, stardup image. But it did not change!
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
ekerbuddyeker said:
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
Click to expand...
Click to collapse
And how did you figured it out? Did you return the device to the shop?
I have this exact same issue except I am on AthineOS... I thought it was my PC until I read these posts. No OS updates or any other machine updates were performed except on my device. Any clues as to a fix?
Somehow I don't think this is just hardware.
I did drop my device once, but that was even before first flash. After that it still worked.
So, some weeks later I HSPLed without any problem. After that the device still worked.
Then, after investigating which ROM to use I flashed the ROM a few days later.
Right after the first flash it all still worked. So, had to flash another and from that moment on the device cannot be reckognised by any PC.
I still think it has something to do with the flashing. I think the device does not give correct feedback when it receives some commands from PC (eg. the command to reply the device type/number)
Does anyone know a program which can check the USB port for the HTC Touch Pro 2? Just to test wheather the connector pins are ok?
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
crazythunder said:
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
Click to expand...
Click to collapse
These are the first things done. And this was already written in here.
It happens with many PCs, including some on which the device never connected to.
Also tried different cables, ports, etc.
Also disabled the fast transfer etc. etc.
Even tried several other ROMs, inclusding original Dutch 6.1 and Dutch 6.5
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
waynehead05 said:
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
Click to expand...
Click to collapse
Some questions, to verify this is due to flashing or is a fault in the design of the device...
- Where did you get the device?
- Have you flashed the device?
- Did you accidentally drop the device?
hi just to say had a completely orignal o2 xda orbit 1 flashed with new rom everything worked perfect before now active sync plays up i can sometimes connect but get usb device not reconigsed then click cross then pull out usb then reinsert then active sync connects works fully functional then after 5 min it disconects this is driving me mad as use active sync for a fast internet connection on my pda as my wifi is crap