I previously owned the att tilt so i had the M3D cab file on my computer.After doing some changes to my registry on my new Incite i discoverd that i had D3D and Direct Draw drivers installed on it.Went out on a limb and installed M3D.Runs much better and faster than it did on my tilt on this phone.It is also able to hibernate unlike the tilt and can shutdown/startup with M3D active.Now we just need some WQVGA skins =P
sseymour said:
I previously owned the att tilt so i had the M3D cab file on my computer.After doing some changes to my registry on my new Incite i discoverd that i had D3D and Direct Draw drivers installed on it.Went out on a limb and installed M3D.Runs much better and faster than it did on my tilt on this phone.It is also able to hibernate unlike the tilt and can shutdown/startup with M3D active.Now we just need some WQVGA skins =P
Click to expand...
Click to collapse
Did you install the M3D made for the tilt? My sister just got an incite and I think she'd like this.
Yes its the same version made for the tilt.Some problems with it tho like when the screen rotates and rotates back to potrait the buttons are offset.I just hope theres a way to port it to WQVGA
If you don't mind me asking, where did you download the one for the Tilt from? I can't seem to find the one for it... thanks
if this is the case, PLEASE post the dump for the Incite!
us tilt users might find it very useful!
thanks
Can you upload the TF3D file to rapidshare or something? I had a Tilt as well and had this then deleted the file when I bought an iPhone. Now I'm using an unlocked Omnia and I really want to try this on it.
Status?
What is the current status of TF3D of the incite? where do we download the necessarily files? are there skins available at the correct resolution?
Please
I'm a KS20 user and it would be gorgeus if those direct 3d drivers were ported to lg ks20.Thank you for reply.
sorry for the bump, but im wondering if anyone has this
How you installed TF3D on a WQVGA? It's not VGA only?
TF3D on incite
i actually have an lg incite and would love to have tf3d on it so please drop me a link to the file
Ditto. Bump to the top.
what registry edits
sseymour said:
I previously owned the att tilt so i had the M3D cab file on my computer.After doing some changes to my registry on my new Incite i discoverd that i had D3D and Direct Draw drivers installed on it.Went out on a limb and installed M3D.Runs much better and faster than it did on my tilt on this phone.It is also able to hibernate unlike the tilt and can shutdown/startup with M3D active.Now we just need some WQVGA skins =P
Click to expand...
Click to collapse
just got an incite, had a tlt and nokia 5800.
???
sseymour said:
I previously owned the att tilt so i had the M3D cab file on my computer.After doing some changes to my registry on my new Incite i discoverd that i had D3D and Direct Draw drivers installed on it.Went out on a limb and installed M3D.Runs much better and faster than it did on my tilt on this phone.It is also able to hibernate unlike the tilt and can shutdown/startup with M3D active.Now we just need some WQVGA skins =P
Click to expand...
Click to collapse
So whats the bad and whats the good about this M3D app.
does it run perfectly or not?
ps: what WQVGA app is the best?
Related
i just saw the demo of the TouchFLO software for the HTC Touch.
Does anybody know if this also will work on the Artemis?
And is it already available?
Thanks!
no it's not possible on the artemis cause they use a differend kind a touchscreen.
but i really like the shortcutscreen with pictures to dial. i hope someone can make it available for the artemis
spb mobile shell has a pic dialer
there's a file called todayphoto.cab i think, that's a home screen plugin where you can just touch the picture to initiate a call. has limitations, but works
kasperke said:
no it's not possible on the artemis cause they use a differend kind a touchscreen.
Click to expand...
Click to collapse
I don't think so. It must be the same technology.
Ich you think of Apples Multitouch: HTC Touch doesn't have it.
I have been shown a bandango video of an S200 working flawessly with touchflo interface.
Sorry not to have the url.
If touchflo runs on a S200 screen, it should run also on artemis
What i dont know is if it would run only under WM6, or also under WM5
Hi, I've just had a quick look at the Elf/Touch on youtube, very very nice. So it has finger scrolling of all lists kinda like Larna's iContacts. I just downloaded a rom dump from the touch and it looks like if I had any idea at all what I was looking at there might be a dll or an exe or something else that could just be copied into my orbit so I could have that lovely scroll thing, Yeah and the contacts app looks really good as well. The animated launcher cube looked nice but spb mobile shell comes close at least in a utilitarian way in functionality.
The rom dump was dead easy to find by searching in the Elf forum. Would be nice if a brain could have a sniff through it.
Check this out
http://www.htc.com/www/product.aspx?id=46294
does someonae has the new HTC touch 3d........-----
I WANT IT.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
isnt it only for htc touch diamond?
It isn't out yet. The 3d Touchflo Interface debuts with the HTC Diamond. Should be out by June/July.
I forgot to mention that the 3d Touchflo Interface demands better hardware and memory than most of the devices any of us has currently. The chances that it will run smoothly with our devices are very slim.
I think its a little sluggish on Touch Diamond itseld from what Ive heard from some of those who attended the press event.
Imagining it on Artemis could only be a joke.. It requires a GPU. And it also looks like this application has a lot of locks preventing cookers from porting. But still XDA-dev has much better hackers to overcome those. Lets wait for the devices on the market first.
Regards,
Carty..
here is a couple of words...i'd like to have 3d,but i suppose its not possible
However, a TouchFLO 3D upgrade for current HTC Touch smartphones (like the Touch, Touch Dual or Touch Cruise) isn't planned due to increased and changed hardware requirements.
Click to expand...
Click to collapse
if this was called HTC manila when it was in the development stage then i hav a ver of this(cab file) which is meant for VGA screen PPCs only
fair does that phone looks stunning,i was gonna get the orbit 2, but the diamond is much faster and better looking, quite looking forward to this one
After see Pontui Home runing so smoothly on my Artemis, I have a little hope that this programa will not demand a Hi-end hardware to run. I HOPE!!!
....
working man said:
After see Pontui Home runing so smoothly on my Artemis, I have a little hope that this programa will not demand a Hi-end hardware to run. I HOPE!!!
Click to expand...
Click to collapse
that same . too
CAB File
Can you post this CAB file?
sheennick123456:
if this was called HTC manila when it was in the development stage then i hav a ver of this(cab file) which is meant for VGA screen PPCs only
Click to expand...
Click to collapse
HTC manila AKA touch flo 3D
here you go
http://www.4shared.com/file/47016031/5436a738/manila1001030release.html
i checked it........it is the same user interface tht is in the htc diamond
but remember it is only for VGA ppcs n wont work on artemis
some people hav tried it on various VGA ppcs n the app runs only on HTC made ppcs(doesnt work on O2 XDA flame)
u may get framerates like 10-15fps
I have a X50v that's with my friend. I'll make a try...
Hi, In this thread:
http://forum.xda-developers.com/showthread.php?t=363500&page=14
a developer called dobb try to adapt the manila VGA to QVGA and release a version alpha and beta that works in the qvga devices but obviously run slow and need to adapt the soft buttons. You can install the cab of VGA version and the dll's, thus overwrite the files in manila folder with the alpha or beta version of QVGA.(This version need to polish more)
The version posted for sheennick123456 was a beta of touchflo3d leaked in january 2008, and with greater reason, the actual version should run faster.
I have no doubt that any developer here not only achieved by extracting the touchflo3d but also the driver to run correctly.
Think about that:
When "Touch" released, HTC said the touchflo could only run on those Devices because of the special hardware (screen), but there are many of us who run the touchflo in our Artemis without such hardware (screen).
Greetings
really it isn't working... i installed it and i don't know how to uninstall.. anybody??
it creates a folder named manila somewhere in the device memory
i dont recollect the exact path but i guess it is in the my documents
all u have to do is delete this folder
If you want to uninstall you have to:
delete the folder in Program Files/Manila
delete all registry in HKLM/software/microsoft/today/items/manila
delete manilatoday.dll in windows folder
I tried in my artemis and works slowly but the second beta needs more work.
ryomahino said:
If you want to uninstall you have to:
delete the folder in Program Files/Manila
delete all registry in HKLM/software/microsoft/today/items/manila
delete manilatoday.dll in windows folder
I tried in my artemis and works slowly but the second beta needs more work.
Click to expand...
Click to collapse
that's what i did on "blind" thanks anyway... let's hope that some of the "gods" over here will adjust it for Artemis
Dont works on Kaiser WM6....
I have one, battery sucks. it's ok kinda hard to get around
cvenk said:
Check this out
http://www.htc.com/www/product.aspx?id=46294
does someonae has the new HTC touch 3d........-----
I WANT IT.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I have one it'ss hard to move around and remember keys, battery sucks too,
REALLY COOL!!!!
although it is touch screen but you can use to edit setting were's the links...
QVGA CAB file (for QVGA, WQVGA & square devices)
http://ac.22055.nl/S2U2-1.22b-QVGA.zip
program that could be used to control the phone on your PC and change the s2u2 settings
http://www.mtux.com/
leoles21 said:
REALLY COOL!!!!
although it is touch screen but you can use to edit setting were's the links...
QVGA CAB file (for QVGA, WQVGA & square devices)
http://ac.22055.nl/S2U2-1.22b-QVGA.zip
program that could be used to control the phone on your PC and change the s2u2 settings
http://www.mtux.com/
Click to expand...
Click to collapse
Nice app, but as far as I know from Hermes comunity, sometimes is froze devices. I think that there is a confllict with the HTC built in lock.
Just my 2 cents.
Cheers
iphone 8gb unlock
does anyone have a recomendation for software that I can download to unlock my older iphone.Theres so much crap out there that I would like to know whats what!
hi everybody is there any way to have the new manila 2.5 as a cab installer and then as a panel like i used to do whit manila 2.1? thanks
I wonder if that's possible? But if yes then that would be really nice.
This is a really good idea...who can help XDA members?
Actually I can't recommend installing TF3D by cab, because it consists of a lot (and I mean a lot, certainly 2.5!!) of files. And installing it by cab will make a huge impact on the system.
The first TF3D for X1 was available as a cab, but the diffence between installing by cab or cooked in where huge. TF3D by cab had all sorts of quirks and was slow a h*ll.....
FOr example, the manila 2.1 package alone is almost 40mb (and 2.5 is even bigger) so you end up with a cab of about 50mb.
But back to the point, haven't seen a cab of manila 2.5 (and there probably will not be one for the above reason).
thanks Lokatho for the esplaination, btw now that i know about the problem of a cab i was just wondering if a rom with a manila 2.5 PANEL could be built...
-=W1S3=- said:
hi everybody is there any way to have the new manila 2.5 as a cab installer and then as a panel like i used to do whit manila 2.1? thanks
Click to expand...
Click to collapse
Found this online: http://www.pda4x.com/read.php?tid=103696
Guess they have CABbed Manila 2.5....interesting. Wonder what the file size is.
Now gotta look for a CAB to make it a panel.
angusrouse said:
Found this online: http://www.pda4x.com/read.php?tid=103696
Guess they have CABbed Manila 2.5....interesting. Wonder what the file size is.
Now gotta look for a CAB to make it a panel.
Click to expand...
Click to collapse
It's just a manila 2.5 theme and not a manila 2.5 cab!!!
It was made by a XDA member and you can find it here
LoL
btw nice to see that my request is appreciated
Mopral said:
It's just a manila 2.5 theme and not a manila 2.5 cab!!!
It was made by a XDA member and you can find it here
Click to expand...
Click to collapse
it possible to install in xperia with wm 6.1 ??
Lokatho said:
Actually I can't recommend installing TF3D by cab, because it consists of a lot (and I mean a lot, certainly 2.5!!) of files. And installing it by cab will make a huge impact on the system.
The first TF3D for X1 was available as a cab, but the diffence between installing by cab or cooked in where huge. TF3D by cab had all sorts of quirks and was slow a h*ll.....
FOr example, the manila 2.1 package alone is almost 40mb (and 2.5 is even bigger) so you end up with a cab of about 50mb.
But back to the point, haven't seen a cab of manila 2.5 (and there probably will not be one for the above reason).
Click to expand...
Click to collapse
Make ROM that will preserve all user info and programs and i will update immediately.
Flash a ROM!
It would be really pointless to have a cab of 2.5, it would slow down your whole device and would barely run!
if you want 2.5, to the easiest and best way, flash to one of our chef's great ROMS!
I think that Valkyrie 3.2 is the best....but there are others....like NRG's wwe energyrom....and ITJE TOUCHIT LEO...
if you want 2.5 you need to flash!
and as far as a panel goes...it would be relativley pointless if you are already using 2.5 as your homescreen....
and if you are a NEWB....you should look and search into 2.5, the threads and roms before opening relatively pointless threads...
just my 2 cents
acidbath5546 said:
It would be really pointless to have a cab of 2.5, it would slow down your whole device and would barely run!
if you want 2.5, to the easiest and best way, flash to one of our chef's great ROMS!
Click to expand...
Click to collapse
You are right, apart from the fact that (as stated out in my recent thread) you are supposing that everyone is in love with WM6.5.
I was looking as well for a cabbed Manila 2.5 to install it on WM6.1, so it would really be great to have it (or, have it cooked on a WM6.1)
there are modules and dll's for the new leo which wont work on 6.1
there is a manila 2 cab
linkt to thread http://forum.xda-developers.com/showthread.php?t=448178
its a bit confusing, you have to download EnableRapi.cab first and install it. (in wont work the other way around, i tried it.
than you install the new manila 2 cab to internal memory. (that takes about 2 hours + in the tread are 3 different manilla cab files and only one has landscape i think, the beta3 but just use my link)
i have direct links to the files
EnableRapi cab: http://forum.xda-developers.com/showthread.php?t=300592 (you have to scroll down a bit till you see the file)
manila 2 cab: http://rapidshare.com/files/218194087/TF3DHDB3.cab
and about the speed of manila 2, i have it installed one week ago and it crashed 1 time so far because i pressed accidently on picture presentation and than on weather tab and than switched to landscape (that was too much xD). and tabs like programs, settings and weather always take some time to show up. (about 2-4 seconds) all other tabs are fast once they loaded the first time. landcape switch takes always around 4 secounds, never longer.
and someone said its a huge impact on the device to install a 45mb cab file, and that might be true, but i have installed like 3 different manilas and this one 3 times (and uninstalled again, it never worked because i always forgot something) i never hardresetted the x1 after all the installing and it still works quiet good.
forgot to say, its not a panel, just a today element. and im using winmo 6.1
Thanks to show them how to install manila 2.0 on Wm6.1 but they search a cab for manila 2.5
yes, i understood all you're saying, so i know that a rom with manila 2.5 in it will run better. Now that i know it, i'd like to know if with a rom like this will be possible to run the manila as a panel instead of run it as the standard today screen. I want this option just because i like to change today home screen very often and also because if i have manila 2.5 in use in the today and i open another panel, it will still run in backgroung, making the whole phone go slower...
(sorry for my bad english :S hope you'll understand it...)
rotastrain said:
there are modules and dll's for the new leo which wont work on 6.1
Click to expand...
Click to collapse
Miri did a WM6.1 ROM with Leo
http://forum.xda-developers.com/showthread.php?t=547278
I read somewhere there is manilla2d 2.5? Im not certain but i though i saw a new menu on top of the sliding menu on the bottom? Maybe it was a theme also, could someone send me a link and possibly a guide how to get spb mobile shell on my vogue? i couldnt find one on here. Thanks.
manana12 said:
I read somewhere there is manilla2d 2.5? Im not certain but i though i saw a new menu on top of the sliding menu on the bottom? Maybe it was a theme also, could someone send me a link and possibly a guide how to get spb mobile shell on my vogue? i couldnt find one on here. Thanks.
Click to expand...
Click to collapse
Manila 2.5 will not work on the Vogue.
To get Mobile Shell, you just need to go to their SPB's website and download it, here is a link...
http://www.spbsoftwarehouse.com/products/mobileshell/
manana12 said:
I read somewhere there is manilla2d 2.5? Im not certain but i though i saw a new menu on top of the sliding menu on the bottom? Maybe it was a theme also, could someone send me a link and possibly a guide how to get spb mobile shell on my vogue? i couldnt find one on here. Thanks.
Click to expand...
Click to collapse
For further clarification, there is no such thing as "manilla 2d 2.5"
The latest manilla 2d is 2.0 1919.1432 from the "mega"
Confusingly the latest Manilla 3d is also ver 1919 (leo), however 2.1 and 2.5 generally refer to manilla 3d (also known as TouchFlo, now "sense")
Manilla 2d is the version of Manilla without 3d animations, and runs on devices with less processing power annd RAM. That being said, the latest version does feature an actual flipping clock.
Manilla 3d is feature and animation rich. It was first seen on the Diamond, then others such as TouchPro, HD etc. The latest version comes form the Leo aka HD2.
Our Vogue does not use M3D, the processor and ram aren't enough and we would need hardware supported openGL to run it. NFSFAN came close, but not close enough.
jmitr said:
For further clarification, there is no such thing as "manilla 2d 2.5"
The latest manilla 2d is 2.0 1919.1432 from the "mega"
Confusingly the latest Manilla 3d is also ver 1919 (leo), however 2.1 and 2.5 generally refer to manilla 3d (also known as TouchFlo, now "sense")
Manilla 2d is the version of Manilla without 3d animations, and runs on devices with less processing power annd RAM. That being said, the latest version does feature an actual flipping clock.
Manilla 3d is feature and animation rich. It was first seen on the Diamond, then others such as TouchPro, HD etc. The latest version comes form the Leo aka HD2.
Our Vogue does not use M3D, the processor and ram aren't enough and we would need hardware supported openGL to run it. NFSFAN came close, but not close enough.
Click to expand...
Click to collapse
Nice explanation
egzthunder1 said:
Nice explanation
Click to expand...
Click to collapse
Completely agree.
Also, what do you mean NSFAN came close?
manana12 said:
Completely agree.
Also, what do you mean NSFAN came close?
Click to expand...
Click to collapse
A while back, when M2D was being ported to QVGA devices, there were developers (including Chainfire and herg) who were working towards getting TF3D to work on QVGA. However, it was too complicated due to the fact that a bunch of this was coded in lua and there were thousands of images that needed to be scaled down from VGA to QVGA. Long story short, that project stopped once M2D came out as it was "good enough". I believe NFSFan was part of that development team as well, which is why he mentioned that he "came close".
Crap, and i just spent the last 2 hrs searching the net for a QVGA Manila 2.6 for my Vogue.
edgarpoe said:
Crap, and i just spent the last 2 hrs searching the net for a QVGA Manila 2.6 for my Vogue.
Click to expand...
Click to collapse
...Only to encounter my very philosophical revelation about M2D