Related
Hi,
as many of you allready know, HTC released the new HTC Touch as a response to Apple's iPhone.
I looked at some videos on youtube and some technical specs of the phone.. and it simply seems a program that runs on a WM6. So it shouldn't be some difficult to port it to other devices, I don't think that the HTC Touch has some special hardware or touchscreen.
The only thing I read is that it has different touchscreen drivers, but that shouldn't be a problem: I already saw here on xda-dev many other ports or programming miracles
Ok it's a program native for QVGA... that sucks and could possibly cause many problems to port it on the Universal.
It could also be that it wouldn't have decent performance playing the animantions (page flip,...) because of the VGA resolution.
I don't know.... but I would like to create this thread in order to see the progress and the news of the Touch Technology (let's call it so) port on Universal.
Helmi, Midget and all other gurus of the universal... please help us with this cool Touch Tech
Videos of the HTC Touch:
http://www.youtube.com/watch?v=cI9h3TRndhY
http://www.youtube.com/watch?v=Gj8PMcvYTZo
...and here is some basic infos and some dumps:
http://forum.xda-developers.com/showthread.php?t=311225
I've to say that the today plugin and the rest of the menus are very similar to Spb Mobile Shell... the only thing more are the gestures that you can make on the touchscreen and the animations between the menus.
Ok let's go!
We'll see how it goes on now
So...
It's kinda just a new interface for Windows Mobile?
Yep
markymanxxx said:
So...
It's kinda just a new interface for Windows Mobile?
Click to expand...
Click to collapse
Yep I think so too. It doesn't seem to me that there are significant hardware differences between the HTC Touch and other PocketPCs.
But let's wait and see what our gurus say to it
Sorry to dissapoint....
Sorry to be the bearer of bad news guys & gals, but over at the Athena and Hermes forums and some others over at 4winmobile have been looking into this for some time now and there is a major difference other than the .dll driver.
The Touch has a new technology screen that is completely different from what has been in PPC's before. Most of the software can be ported from the HTC Touch/Elf, and will work on QVGA WM5/6 devices and some conversions will be necessary for our VGA devices, but the actual Cube Touch GUI will NOT work without the right hardware.
see here for more info:
http://forum.xda-developers.com/showthread.php?t=310459&page=3
mackaby007 said:
Been following a cool thread over at 4winmobile.com about the whole HTC Touch themes, cabs and interface etc...Looks like everything else is transferable, except the cube GUI, as......
Also...
Sorry peeps. Looks like new screen hardware after all But no one is giving up on an alternative.
Anyway, take a look at that thread anyway as it is very interesting all the same.
http://www.4winmobile.com/forums/hermes-black-rom-announcements/9739-black-iv-shadow-preview.html
Click to expand...
Click to collapse
have to confirm that it is new hardware, and that the plugins/programs have the resolution hard-coded into them so nothing useful for our uni yet...
interestingly enough though the biotouch (what they call it) calls use native windows mobile dll's (albeit new functions that previously were not in there, so we can speculate that this isnt a one off and more devices will be seen with these type of screens)
dll's and VGA
Basically when I see how they use this touchscreen I see no big difference between an old one.
For the cube GUI the system has only to recognize a "touch & drag" on the screen. If this function isn't in our dll's they could somehow be ported on our uni
But the most big problem I see is the VGA resolution.....
Anyone knows the HTC Touch specs? Has it some new and high performance graphic chip (perhaps nvidia or something similar?)
Because we have to consider that VGA = 4x QVGA (number of pixels) and as I know our beatuful Uni hasn't a luxus graphic processor. I remember some benchmarks and compared to other devices it had a somehow slower graphic chip.
I'm afraid that if we can port the gui to Uni on VGA it won't work with decent performance
Does anyone know more of the Cube GUI? Is it precalculated (only an animation) or is it a realtime rapresentation of the current objects flipping over the faces of a cube?
To be honest I think it's precalculated graphics... Why make it realtime and performance-cost? The cube turns very fast and it would very difficult to see the difference between a simple animation and a real 3d rendering.
And when we think how many open processes a user has on his pocketpc; I could easly imagine that if we only were listening to music with an mp3 player, with a resident antivirus (lol) and some other background apps....the cube would have big problems to be rendered at a decent framerate.
Ok these are only speculations, I have no idea of how the HTC Touch really works. I only saw the youtube presentation
If the cube won't be ported on Uni... I'll wait for someone to adapt Beryl for PocketPC eheheheh lol
Go on folks...
Greets
Touch on..... Prophet.
I made some changes in touch rom and it can run on my prophet, but i have alot of bugs like battery bug and touchscreen bug.
Silver_Gost said:
I made some changes in touch rom and it can run on my prophet, but i have alot of bugs like battery bug and touchscreen bug.
Click to expand...
Click to collapse
Does the cube GUI work (even partially) ?
are there no news for the Universal??
Anybody can help me???
i`ve tried to install a cab Touch Flo on my hermes (Dopod 838Pro),but i`m confused...why it can`t work on hermes....anybody try before?
Sorry for my english
wow, shocking news.
how about search for the words "Touch flo doesn't work on Hermes"
August_Excalibur said:
Anybody can help me???
i`ve tried to install a cab Touch Flo on my hermes (Dopod 838Pro),but i`m confused...why it can`t work on hermes....anybody try before?
Sorry for my english
Click to expand...
Click to collapse
Ok..*controlling myself* *wont flame you*
Welcome..
There are many threads similar like yours..
Try to use search..
and to get to your question, Why? because it just dont work.. It seems like hermes doesnt support TouchFlo but it supports ButtonFlo (if you ask me, buttonflo sucks!)
next time, use search
hehehe...have u try before???i`ve just do a hardreset since it doesn`t work.... sorry for my english...i know my english bad...ok...next time i`ll try to use search....thanks for ur suggestions...Bram87
Of course hermes can do the whole touchflow thing. We have a good touch screen that can record touch's, swipes drags etc.
The current problem is that the "touch" part of the current incarnation is made for a computer with a different type of screen. so just copying the files over doesnt work. it's like tyring to run a ATI tech demo on a Nvidea card. just cos both systems have XP, and have similar capable hardware, the calls from the software to the hardware are differnt.
However what I am really confused about is why anyone wants this nonsense on there ppc. Its basically a animated gif spawning over 3 screens. Its a shoddy gimik which has no true tie in to the workings of your ppc's apps.
Currenty problems regarding slowdowns system crashes etc is purly down to poor coding for this 1/2 baked interface.
Ribdool said:
However what I am really confused about is why anyone wants this nonsense on there ppc. Its basically a animated gif spawning over 3 screens. Its a shoddy gimik which has no true tie in to the workings of your ppc's apps.
Currenty problems regarding slowdowns system crashes etc is purly down to poor coding for this 1/2 baked interface.
Click to expand...
Click to collapse
Cos it's kinda like the iphone, innit!
August_Excalibur said:
Anybody can help me???
i`ve tried to install a cab Touch Flo on my hermes (Dopod 838Pro),but i`m confused...why it can`t work on hermes....anybody try before?
Sorry for my english
Click to expand...
Click to collapse
I like this site more of late. With so many new people, it's good for at least a laugh or 2 per day
Ribdool said:
Of course hermes can do the whole touchflow thing. We have a good touch screen that can record touch's, swipes drags etc.
The current problem is that the "touch" part of the current incarnation is made for a computer with a different type of screen. so just copying the files over doesnt work. it's like tyring to run a ATI tech demo on a Nvidea card. just cos both systems have XP, and have similar capable hardware, the calls from the software to the hardware are differnt.
However what I am really confused about is why anyone wants this nonsense on there ppc. Its basically a animated gif spawning over 3 screens. Its a shoddy gimik which has no true tie in to the workings of your ppc's apps.
Currenty problems regarding slowdowns system crashes etc is purly down to poor coding for this 1/2 baked interface.
Click to expand...
Click to collapse
The part that is nice is making the UI more finger-friendly as opposed to stylus-req'd. E.g. I most like the ability to scroll thru my contacts without having to hit the scroll bar on the right. being able to "drag" the screen is what I want.
Thus, I don't care about the TouchFLO as much as I do projects like the ContactManager prog that someone developed. I want the programs (browser, contact mgr, music playlists, etc.) to be done via finger dragging, than stylus-to-scrollbar...
Originally Posted by Ribdool
However what I am really confused about is why anyone wants this nonsense on there ppc. Its basically a animated gif spawning over 3 screens. Its a shoddy gimik which has no true tie in to the workings of your ppc's apps.
Currenty problems regarding slowdowns system crashes etc is purly down to poor coding for this 1/2 baked interface.
Cos it's kinda like the iphone, innit!
hahaha....that`s what i mean...
i like touch flo coz it`s the iphone...
uhhhh....anybody can make it work on hermes?
please....
jomo25 said:
The part that is nice is making the UI more finger-friendly as opposed to stylus-req'd. E.g. I most like the ability to scroll thru my contacts without having to hit the scroll bar on the right. being able to "drag" the screen is what I want.
Thus, I don't care about the TouchFLO as much as I do projects like the ContactManager prog that someone developed. I want the programs (browser, contact mgr, music playlists, etc.) to be done via finger dragging, than stylus-to-scrollbar...
Click to expand...
Click to collapse
Which is the reason why the HTC Homeplug is so useful.
August_Excalibur said:
Anybody can help me???
i`ve tried to install a cab Touch Flo on my hermes (Dopod 838Pro),but i`m confused...why it can`t work on hermes....anybody try before?
Sorry for my english
Click to expand...
Click to collapse
it works on the hermes you just gotta let your phone get enough sleep first cause its a tiring process
unwired4 said:
Which is the reason why the HTC Homeplug is so useful.
Click to expand...
Click to collapse
And I have that working, in color, no less. I'm wating for the 6th button so I can drop the audio manager today plug in and have it in the same HTC Home space.
Seriously has anyone here used a iphone.. this htc touch is nothing similar.
I can understand the desire to use the ppc without a stylus, however this does not allow it. It's not even a pretty front end.. jerky 8 frame black and white fixed animation which isnt adaptive to personal modifications, which currently runs like crap on a 400mhz system.. c'mon..
The nicest feature of the iphone is the media side. "touch flow" which the htc touch doesnt even attempt to do.
incase you havent seen the htc touch in action.. this is it... Amazing.. sigh..
http://www.youtube.com/watch?v=e9SEarIN7HM&mode=related&search=
As soon as you decide which of the 3 limited screens you desire back to the regualr wm5/6 screens.
If the htc touch included a special touch media player that scrolled through your images, music, videos, contacts, emails, sms's, games, had a decent dialer/text/email interface..etc.. maybe it would be comparable to the iphone.. not neciserially in design, just function.
Dont get me wrong I love my hermes. It's versatility is what makes it great, I wouldnt trade it for a iphone.. well maybe I would.. just to sell it and get another ppc & holiday.
Now we have good stable operating system, sure a few tweaks here and there are needed, that shall allways be the case.. we should all poll idea's to design a great interface, and not waste time over a useless 3 screen cross device hack that doesnt really work properly.
Its not a easy task, but there are a fair few creative and bright sparks in the xda devs community. Starting a fresh is the way togo.
A nice quick introduction to the differences between the interfaces.. plus funkeh music.. http://www.youtube.com/watch?v=mk3wGFuQjC4&mode=related&search=
jomo25 said:
The part that is nice is making the UI more finger-friendly as opposed to stylus-req'd. E.g. I most like the ability to scroll thru my contacts without having to hit the scroll bar on the right. being able to "drag" the screen is what I want.
Thus, I don't care about the TouchFLO as much as I do projects like the ContactManager prog that someone developed. I want the programs (browser, contact mgr, music playlists, etc.) to be done via finger dragging, than stylus-to-scrollbar...
Click to expand...
Click to collapse
Everything you suggest can be achieved with buttons and scroll wheel - no stylus req'd.
Home plugin is a performance killer and unreliable.
KISS - Keep It Simple Stupid!
esseff said:
Everything you suggest can be achieved with buttons and scroll wheel - no stylus req'd.
Home plugin is a performance killer and unreliable.
KISS - Keep It Simple Stupid!
Click to expand...
Click to collapse
*sigh* to each his/her own. using buttons and scroll wheel "get the job done" but note the same for me.
Stuck on splashscreen after Touchflo install
Hi experts,
I'm currently running WM6 Black Satin since a few days and I'm allready addicted to playing with all kind of stuff. I came across Touchflo and installed it. When I did a softreset, I couldn't get my Hermes device past the splashscreen. I removed my storage card and and did another reset: same result, stuck on splashscreen. I'm not really interested in getting Touchflo to work on my device, I was just curious. But now I just want to get my device working again. So what do I do? Any advice is welcome
Now we have good stable operating system, sure a few tweaks here and there are needed, that shall allways be the case.. we should all poll idea's to design a great interface, and not waste time over a useless 3 screen cross device hack that doesnt really work properly.
Its not a easy task, but there are a fair few creative and bright sparks in the xda devs community. Starting a fresh is the way togo.
Click to expand...
Click to collapse
http://www.lakeridgesoftware.com/forum/showthread.php?t=11402
This is a good idea for start, found over on Lakeridgesoftware's wrbsite (the people who make Wisbar)....
wisbar is the untimate interface modding tool for the pocketpc but this 'itask' shows the potential for a new xda-developers interface to be developed incorporating all the best ideas we have.....
found this is the Development forum
http://forum.xda-developers.com/showthread.php?t=328010
Tried it with cingular 8525, and it worked great, navigate using finger not Buttonflo
darkgemini said:
found this is the Development forum
http://forum.xda-developers.com/showthread.php?t=328010
Tried it with cingular 8525, and it worked great, navigate using finger not Buttonflo
Click to expand...
Click to collapse
This looks like it installs its own custom interface and doesn't use the touch cube. Is this correct?
There's a Hermes thread on this...
http://forum.xda-developers.com/showthread.php?t=327846
Guys this program is a memory whore, takes like 4 megs of ram, not ideal at all for anyone getting email from an exchange server or people using active sync.
It works. The config can be a bit tedious and you'll need to get some better icons (see the hermes thread referenced above), but it pretty smooth. It does seem to slow down over time though and your screen gets fingerprinty but it works as advertised.
Can this work on the hermes?
How to install and make it work?
Is it touchflo or button flo?
PLEASE REPLY THANKS IN ADVANCE
hsanghavi said:
Can this work on the hermes?
How to install and make it work?
Is it touchflo or button flo?
PLEASE REPLY THANKS IN ADVANCE
Click to expand...
Click to collapse
Yes, it works on Hermes.
Click the cab to start the install.
It works like TouchFLO Cube.
hsanghavi said:
Can this work on the hermes?
How to install and make it work?
Is it touchflo or button flo?
PLEASE REPLY THANKS IN ADVANCE
Click to expand...
Click to collapse
I would call it: FlashFlo
Olioaglio
where can i download it?
Loving TouchFLO, testing!
This will be the closest we get to TouchFLO with the Hermes. Its a decent project, excited to see the final version...
not touchflo
I
Just to clarify some aspects.
the application is not the touchflo inself
the touchflo is finger scroll in all applications , so you dont use stylus, touchflo substitute the scroll bars.
see you
If this flashflo is just for the Cube, it is not the real touchflo because it can't finger scroll in wm6 anywhere
Good application, sadly isnt touchFLO, but none the less I see more of this kind of application spawning. HTC have created a monster with touchFLO.
Check this out
http://www.htc.com/www/product.aspx?id=46294
does someonae has the new HTC touch 3d........-----
I WANT IT.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
isnt it only for htc touch diamond?
It isn't out yet. The 3d Touchflo Interface debuts with the HTC Diamond. Should be out by June/July.
I forgot to mention that the 3d Touchflo Interface demands better hardware and memory than most of the devices any of us has currently. The chances that it will run smoothly with our devices are very slim.
I think its a little sluggish on Touch Diamond itseld from what Ive heard from some of those who attended the press event.
Imagining it on Artemis could only be a joke.. It requires a GPU. And it also looks like this application has a lot of locks preventing cookers from porting. But still XDA-dev has much better hackers to overcome those. Lets wait for the devices on the market first.
Regards,
Carty..
here is a couple of words...i'd like to have 3d,but i suppose its not possible
However, a TouchFLO 3D upgrade for current HTC Touch smartphones (like the Touch, Touch Dual or Touch Cruise) isn't planned due to increased and changed hardware requirements.
Click to expand...
Click to collapse
if this was called HTC manila when it was in the development stage then i hav a ver of this(cab file) which is meant for VGA screen PPCs only
fair does that phone looks stunning,i was gonna get the orbit 2, but the diamond is much faster and better looking, quite looking forward to this one
After see Pontui Home runing so smoothly on my Artemis, I have a little hope that this programa will not demand a Hi-end hardware to run. I HOPE!!!
....
working man said:
After see Pontui Home runing so smoothly on my Artemis, I have a little hope that this programa will not demand a Hi-end hardware to run. I HOPE!!!
Click to expand...
Click to collapse
that same . too
CAB File
Can you post this CAB file?
sheennick123456:
if this was called HTC manila when it was in the development stage then i hav a ver of this(cab file) which is meant for VGA screen PPCs only
Click to expand...
Click to collapse
HTC manila AKA touch flo 3D
here you go
http://www.4shared.com/file/47016031/5436a738/manila1001030release.html
i checked it........it is the same user interface tht is in the htc diamond
but remember it is only for VGA ppcs n wont work on artemis
some people hav tried it on various VGA ppcs n the app runs only on HTC made ppcs(doesnt work on O2 XDA flame)
u may get framerates like 10-15fps
I have a X50v that's with my friend. I'll make a try...
Hi, In this thread:
http://forum.xda-developers.com/showthread.php?t=363500&page=14
a developer called dobb try to adapt the manila VGA to QVGA and release a version alpha and beta that works in the qvga devices but obviously run slow and need to adapt the soft buttons. You can install the cab of VGA version and the dll's, thus overwrite the files in manila folder with the alpha or beta version of QVGA.(This version need to polish more)
The version posted for sheennick123456 was a beta of touchflo3d leaked in january 2008, and with greater reason, the actual version should run faster.
I have no doubt that any developer here not only achieved by extracting the touchflo3d but also the driver to run correctly.
Think about that:
When "Touch" released, HTC said the touchflo could only run on those Devices because of the special hardware (screen), but there are many of us who run the touchflo in our Artemis without such hardware (screen).
Greetings
really it isn't working... i installed it and i don't know how to uninstall.. anybody??
it creates a folder named manila somewhere in the device memory
i dont recollect the exact path but i guess it is in the my documents
all u have to do is delete this folder
If you want to uninstall you have to:
delete the folder in Program Files/Manila
delete all registry in HKLM/software/microsoft/today/items/manila
delete manilatoday.dll in windows folder
I tried in my artemis and works slowly but the second beta needs more work.
ryomahino said:
If you want to uninstall you have to:
delete the folder in Program Files/Manila
delete all registry in HKLM/software/microsoft/today/items/manila
delete manilatoday.dll in windows folder
I tried in my artemis and works slowly but the second beta needs more work.
Click to expand...
Click to collapse
that's what i did on "blind" thanks anyway... let's hope that some of the "gods" over here will adjust it for Artemis
Dont works on Kaiser WM6....
I have one, battery sucks. it's ok kinda hard to get around
cvenk said:
Check this out
http://www.htc.com/www/product.aspx?id=46294
does someonae has the new HTC touch 3d........-----
I WANT IT.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I have one it'ss hard to move around and remember keys, battery sucks too,
I owe both a Polaris and a Blackstone and, in my opinion, TouchCube is far better than TF3D. TF3D looks nice but let's face it... it eats up system resources, it's laggy, when browsing through tabs it's not very thumb friendly (you have to bend your thumb to the max), you can't customize the tabs position (it would help if they were placed on one side because it would be easier to scroll through the same number of items having at least 30% more room to place the tabs), the so called customization... is way too limited (you get to change the fonts, the tab order, the shortcuts... in the end you'll get the same layout), the multimedia section was divided with the unhappy default association of the video files with an application clearly meant for photos...
So... my question: can the TouchCube be ported on the Blackstone and, along with it the Polaris Audio Manager? Can the Album application be "broken" in two applications one handling the photos and the other the videos?
I was thinking just the other day "what happened to the cube?"
It was pretty cool. Think it would be good a replacement for the action screen thats floating about?
Try duttys ROM with new manila, TF3D is uber fast
Sallcho said:
Try duttys ROM with new manila, TF3D is uber fast
Click to expand...
Click to collapse
and what about ergonomics?
So... I get it that no developer is interested in porting the Cube to Blackstone
I have never tried it, but how about the option "Cube" under HTC TouchFLO when using Advanced Config. How about changing that to Enabled, will that do the job?
I'll make it my next project
I'm currently finishing an animated today screen for this phone while docked but when I'm done that that I'll start work on a cube launcher that replaces the current Program's tab with a custom app that gives you a cube with multiple options for launching programs... icon view, rotate to list view, rotate to cover-flow view etc
Did you try the cube here : http://forum.xda-developers.com/showthread.php?t=336234
Maybe you just have to adapt to wvga screen ?
http://forum.xda-developers.com/showthread.php?t=336234
I tried this one instead... installs ok but it's for qvga it starts and then it goes to the top-left corner. the animations work just fine, some of the links must be rebuilt... and that's about it. But... i mus admit it... i don't have the knowledge to port it to WVGA...
I know it won't be free, but what about something like SPB Mobile 3 due out at the end of March? Have a look at around 58 seconds in here:
http://www.wmexperts.com/update-spb-mobile-shell-3
edit...
Just found a video showing it on a Touch HD:
http://www.youtube.com/watch?v=xv8DDNE3lgA&feature=related
Cookie999
I appreciate the work of the people at SPB. It seams they did a good job. But... I am not a phonecentric person and something like the cube suites me better. SPBM3 looks like it requires a lot of time to be customized and even when you think you got it you wake up with a fully texted today screen and a directions map to help you swipe through screens...
The HTC TouchCube might seam blunt compareing it to SPBM3 but this is what I like about it... an easy way to launch/hide, easy recognition of the page you're in... i can't explain it very well but for me... the TouchCube is more natural, more organized and a better interface than the windows start menu when it comes to basic tasks.
WOW!!!!!!!!!!!!! SPB Mobile 3 looks great... forget what I wrote before. No need to write what they have already written
Cookie999 said:
I know it won't be free, but what about something like SPB Mobile 3 due out at the end of March? Have a look at around 58 seconds in here:
http://www.wmexperts.com/update-spb-mobile-shell-3
edit...
Just found a video showing it on a Touch HD:
http://www.youtube.com/watch?v=xv8DDNE3lgA&feature=related
Click to expand...
Click to collapse
Dude! That looks freeking awesome and just think I neally bought an iPhone 3G
=]
nice i like it...
Cookie999 said:
I know it won't be free, but what about something like SPB Mobile 3 due out at the end of March? Have a look at around 58 seconds in here:
http://www.wmexperts.com/update-spb-mobile-shell-3
edit...
Just found a video showing it on a Touch HD:
http://www.youtube.com/watch?v=xv8DDNE3lgA&feature=related
Click to expand...
Click to collapse
looks great!!
it moves really good!
Please resize the cube for vga/wvga would love it!!
yea spb mobile shell 3.0 does look good buuuuuuttttttttttttt its not free cost almost $30 and to be honest like many of you have been saying, i do miss the cube app from the htc touch...that app was very cool an useful plus i loved how when you needed it you just swiped up an when you were done you swiped down an that was that... SO I TO HOPE THAT IT CAN BE RESIZED FOR VGA AND WVGA!!!!!
Mrferrari23
If only I could... I'd do it myself
If it was posible id like the touchcube too, it's more finger friendly imo and it's faster to use. Like said before, if I knew how to do it myself, I would..
Bell UI
Browsing the internet I found the Bell UI. Looks quite nice.
To all the chefs out there... is there a chance to port this to HD? 'Cause I'm kinda' giving up the idea of the Cube being ported to the HD...