my p3300 showing SPL1.11.0000 now...but when running RUU, its running fast from 0-100% and show new rom installed successfully..but after restart..the rom still same no change at all.....wht wrongs with it..please help me..thanks
problem settled.
Slt Mr! i have a same problem! P3300! have you a solution for P3300! thank's for your replay!! Camson
What problem?????????
Related
Hi
Below is my bootloader info:
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30lipro
Currently using WM5 Dopod Chi rom
When I want to upgrade to WM6 CHi rom, it freezes at 27% and report error 262.
Please advise what I should do to solve it. Thanks much!!!
dogmood said:
Hi
Below is my bootloader info:
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30lipro
Currently using WM5 Dopod Chi rom
When I want to upgrade to WM6 CHi rom, it freezes at 27% and report error 262.
Please advise what I should do to solve it. Thanks much!!!
Click to expand...
Click to collapse
Hello,use for upgrade memory card,it's ok.
maury
is it official ROM for your carrier?
if it is, can try without manually entering bootloader..
dogmood said:
Hi
Below is my bootloader info:
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30lipro
Currently using WM5 Dopod Chi rom
When I want to upgrade to WM6 CHi rom, it freezes at 27% and report error 262.
Please advise what I should do to solve it. Thanks much!!!
Click to expand...
Click to collapse
Which rom you have downloaded? Link please?
D810_HK_WM6_Upgrade_20070709
Yes it is official but i cannot make it by just clicking the exe file...
Both wm5 and wm6 are official dopod...
Problem solved. I have spent two days on it and I would like to share my ultimate method...
http://forum.xda-developers.com/showthread.php?t=293632
I need to use SSPL-Trin to lead the device into bootloader mode
Then use SD card method to update
Hope it is referential to future user.
maury71 said:
Hello,use for upgrade memory card,it's ok.
maury
Click to expand...
Click to collapse
Problem solved. I have spent two days on it and I would like to share my ultimate method...
http://forum.xda-developers.com/showthread.php?t=293632
I need to use SSPL-Trin to lead the device into bootloader mode
Then use SD card method to update
Hope it is referential to future user.
Today 12:11 PM
...thanks to maury71....or not??????? i said yes.....
Sure. thanks much for murray...!!!
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.
Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?
i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work
Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Dragon-Fly said:
Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Click to expand...
Click to collapse
Ok....you have a big problem..
I've read that if you have a fading screen,you might have your motherboard faulty.
So grab a phone and run to HTC repair center while you still have warranty.
cheers....
Z
Hmm, but all other fuctions on my phone are working correct. I may have given the inpression that is happens all the time but it ain't. Sometimes such as after a call, my screen turns black and if i hit the reset button the screen lights up an than it fades out. That made me believe that is is a software problem, so a newer version of WM may be a solution, or not?
Thanks but, does someone has an idea, or anser to my questions?
It seems hardware related, though if u want to flash another rom, u can check the USPL thread on Artemis upgrading section, then flash the rom u want.
Good luck.
I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Are you using Vista? If yes, then try downloading in a computer with Windows XP?
gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0
Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.
i used hard spl 1.4 olinex and sucessfully
then i upgraded radio to 1.00.25.05
and then in installed wmpoweruser new 6.5.3 rom
but after flashing phone stucked on touch diamond screen and nothing happens.whats the probelm ? please help me.is for one my freinds and i promised a good rom to him and now its broken.
Use mtty procedure from this post: http://forum.xda-developers.com/showthread.php?t=540290
Or more simple write a original htc rom.
lordsinasina said:
i used hard spl 1.4 olinex and sucessfully
then i upgraded radio to 1.00.25.05
and then in installed wmpoweruser new 6.5.3 rom
but after flashing phone stucked on touch diamond screen and nothing happens.whats the probelm ? please help me.is for one my freinds and i promised a good rom to him and now its broken.
Click to expand...
Click to collapse
hard reset the device once and boot again.... post back if its stuck... will see what we can do..