Develop Bugs

Hard-SPL 1.30 MFG - Oli

The new and improved hard-spl for our trinities, thanks to a little glitch in hard-spl's protecting itself against the new spl from HTC we have this new addition Olipro finished for us today. This is based on 1.05 MFG so we now have lnb capability and the rtasks. In addition of course, this SPL really should protect itself against being reflashed...
Donations to Olipro, I am only posting it...
EDIT: Should be working now!

Great as always!

Thanks for both Shadowmite and Olipro to offer us such nich piece.
It saves a lot of us from heartattack of flash problem...

great!! thanks to Olipro!

Great so quick
Thank you so much.

great works
thanks

Thanks for posting shadowmite... I couldn't sleep anyway so I might as well have sorted it myself, but never mind.
tomorrow I'll relocate it to the empirical thread

I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID

Upgrade from P3600
Hi,
Can I upgrade with this tool my P3600 with original WM5 GPS activated Dutch version to WM6?
Or do I need to take other steps?
And, what's the best official WM6 rom to use for European P3600 ?
Thx,
Kopernikus

xtraart said:
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Click to expand...
Click to collapse
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device

Thanks for the hard work.

Olipro said:
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Click to expand...
Click to collapse
I run mtty with "task 32" and it return
task 32
Command error !!!
Cmd>task 32
Level = FF
Cmd>
and the version displays on my device is
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro

Does this mean we don't have to worry about the SPL getting overwritten? We can just flash whatever rom without any precautions?

am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do

HeartMan said:
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
Click to expand...
Click to collapse
I have this problem and spent almost an hour trying. You will need to find an OS only ROM(Eg. http://forum.xda-developers.com/showthread.php?t=312499) and it will flash successfully. Then you boot the PDA OS up and flash any suitable ROM.

I've removed the link for now, this is a bug in his patch and he's looking at it now. In the meantime you need to flash via SSPL or reflash the older hard-spl...

New Hard-SPL from Oli
Hello
Could you give us any news about new Hard-SPL?
When can we expect it?
Robidog

banzro said:
Hello
When can we expect it?
Robidog
Click to expand...
Click to collapse
my guess is....when its ready

I'm still waiting.

thanks to Olipro
I am waiting...

Complete package for upgrade hx2xxx to WM6

Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!

I've an hx2415... would it works?
and when I've finished to DL... what must I do?

I've to Use Pre-BL mode?
'coz doesn't works for mine

I'm on WM5 but it's going really slowly ...
...I'm not able to upgrade to WM6 (SKU problem...?) and I need help about it...
Question: it's normal that PDA going so slow with WM5 ? when I clic on "settings" 2 (or 3) seconds needed

Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx

Did you succed download ?
zeRobee said:
Please give another link to Advanced_pack_for_hx2xxx_to_WM6.exe , cause the original one is too slow for download and had a CRC.
please help me.
thx
Click to expand...
Click to collapse
============
DEAR
Is all OK ? You succed to download and to INSTALL wm6 ?
Please give me directions :
i have Hx2110 .
thanks

Please directions //....STEP BY STEP!
dancer_69 said:
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Thanks to Niko512 from 4pda!
Click to expand...
Click to collapse
------------------------------------
Please directions //....STEP BY STEP!
Who is Niko512 ?
It is a Greek ?
gia sou Niko ....

Anyone had any success with an ipaq 2410 as every attempt at it has resulting in hanging at formatting PS right at the end.
If anyone could provide a guide that would enable me to use WM6 on the 2410 Id be grateful.
Even followed this with no success
http://forum.xda-developers.com/showthread.php?t=372799
EDIT: Finally got WM6 on my mobile thank **** for that.

Having trouble to upgrade my hx2410 WinCE4.21 to WM5
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks

benkud said:
Hi,
I'm having trouble to upgrade my hx2410 to WM5. I successfully connect/sync my hx2410 with my pc thru bluetooth. But the upgrade process always stops at 0% and says to reset the hx2410. I tried many time and it is still the same problem . Anybody knows what might be the problem i'm facing? I wanted to install iGuidance for PPC on it and I need WM5. Help please.
Thanks
Click to expand...
Click to collapse
You can't update device through Bluetooth - it's impossible
You will need a USB cable or Cradle.
Go to my thread LINK and read first 3 posts

Hermes (Error 294)--HELP!

~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!

HTC01X said:
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
Click to expand...
Click to collapse
Please provide more information about your device, such as:
Bootloader type (SPL): You will see this when you enter the bootloader
Did flash finish correctly (eg. 100%)
Do you see tri color screen (Bootloader), or your device froze at Windows splash screen?
Add some more technical info and I am sure somebody can help you, but frankly I have no idea what error 294 is.

HTC01X said:
~><~
Please Help
Today! i update my PDA WM5 to WM6 (use schaps WM6pro_WWE_4.0_full_rc)
have a error 294, and my PDA Phone do not working,
help me ,Thanks!
Click to expand...
Click to collapse
I'm not a tech guru like many on this forum - so I can't really help too much. BUT, I have found the error codes which seem to indicate that error 294 is an invalid vendor ID which suggests that you aren't super CID, aren't using olipro hardSPL or DES to flash with and are trying to flash a ROM which requires a vendor ID.
This is the link I got this info from and I hope someone else can be more helpful.
http://forum.xda-developers.com/showthread.php?p=1177823&highlight=error+codes#post1177823
Good luck...

Hard-SPL question

Hi Experts,
I am trying the new cooked ROM for my trinity, went into bootloader mode(press power,camera and reset ).
It shows : TRIN100 IPL-1.00 & SPL-3.03.0000
Do i still need to flash the HARD-SPL 1.20 in-order for me to safety flash to the
lastest cooked ROM ?
I am currently using the official ROM 6.0 .
Many thanks.

hwonghw said:
Hi Experts,
I am trying the new cooked ROM for my trinity, went into bootloader mode(press power,camera and reset ).
It shows : TRIN100 IPL-1.00 & SPL-3.03.0000
Do i still need to flash the HARD-SPL 1.20 in-order for me to safety flash to the
lastest cooked ROM ?
I am currently using the official ROM 6.0 .
Many thanks.
Click to expand...
Click to collapse
It is highly recommended so you don't brick your phone. It only takes a moment longer, and will prevent headaches for future.
PS: I'm no expert...

Problem whit Arte 100

I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon

Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.

Are you using Vista? If yes, then try downloading in a computer with Windows XP?

gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0

Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.