Develop Bugs

Hard-SPL 1.30 MFG - Oli

The new and improved hard-spl for our trinities, thanks to a little glitch in hard-spl's protecting itself against the new spl from HTC we have this new addition Olipro finished for us today. This is based on 1.05 MFG so we now have lnb capability and the rtasks. In addition of course, this SPL really should protect itself against being reflashed...
Donations to Olipro, I am only posting it...
EDIT: Should be working now!

Great as always!

Thanks for both Shadowmite and Olipro to offer us such nich piece.
It saves a lot of us from heartattack of flash problem...

great!! thanks to Olipro!

Great so quick
Thank you so much.

great works
thanks

Thanks for posting shadowmite... I couldn't sleep anyway so I might as well have sorted it myself, but never mind.
tomorrow I'll relocate it to the empirical thread

I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID

Upgrade from P3600
Hi,
Can I upgrade with this tool my P3600 with original WM5 GPS activated Dutch version to WM6?
Or do I need to take other steps?
And, what's the best official WM6 rom to use for European P3600 ?
Thx,
Kopernikus

xtraart said:
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Click to expand...
Click to collapse
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device

Thanks for the hard work.

Olipro said:
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Click to expand...
Click to collapse
I run mtty with "task 32" and it return
task 32
Command error !!!
Cmd>task 32
Level = FF
Cmd>
and the version displays on my device is
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro

Does this mean we don't have to worry about the SPL getting overwritten? We can just flash whatever rom without any precautions?

am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do

HeartMan said:
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
Click to expand...
Click to collapse
I have this problem and spent almost an hour trying. You will need to find an OS only ROM(Eg. http://forum.xda-developers.com/showthread.php?t=312499) and it will flash successfully. Then you boot the PDA OS up and flash any suitable ROM.

I've removed the link for now, this is a bug in his patch and he's looking at it now. In the meantime you need to flash via SSPL or reflash the older hard-spl...

New Hard-SPL from Oli
Hello
Could you give us any news about new Hard-SPL?
When can we expect it?
Robidog

banzro said:
Hello
When can we expect it?
Robidog
Click to expand...
Click to collapse
my guess is....when its ready

I'm still waiting.

thanks to Olipro
I am waiting...

please help me updsating to wm6..so many problems for a noob

hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year

Dude, you should use search function!
There are many link to Error 246
I suggest read this:
www.trinityguides.info
Here you can find everything. Error 246 too...
This is the rom flash Bible by racer_x!

Jeanxito said:
hi ppl...
I am having many problems installing any rom on my pda trinity ..
Can´t do hard-spl at first time, got error 246. Then, appears bootloader, i restart the application, and at the second time could install it .. ( sems odd to me)..can confirm hardspl is installed.
Then i have downloaded the dopod wm6 and when i try to install, get invalid id error at 1%..it stucks in bootloader..get this on it:
TRIN100
IPL - 0.50
TRIN100
SPL-3.03.0000 (why this?? )
Fortunately can install my official rom from htc..
Conclusion: stick to my official rom ( portuguese ).. stake zero.
But someone already had this problem? Or similar?
i am fed up with seeking.. forum xda, trinityguides .. google..all kind of foruns
what i am doing wrong? Have afraid doing the update with a cook rom my pda crashes..
what can i do?? what have my pda ??
p.s-> 10x in adavance..happy good year
Click to expand...
Click to collapse
From reading the above - I don't believe that the 246 error is your problem. (The 246 error is due to the Rom Upgrade Utility not waiting for the trinity to reconnect in bootloader mode - as soon as the connection is lost you get that. as you have seen, by restarting the RUU - or only starting the RUU when the phone is manually in bootloader mode - you can get the ROM loaded.)
I believe your problem is the stuck at 1% trying to flash the dopod ROM.
My 2 cents: forget the DOPOD ROM - it really is not as good as the cooked ROMs - in this case - "official" is not better.
The 1% sticking problem is a problem with this ROM.
Download another ROM (which one is not an easy question - but I have heard good things about sammy_deluxe ROM if you're looking for a portuguese ROM) and try updating with another ROM. it will work. Patience!
Happy new year to you too

Help, help Im amateur!

Problem whit Flashing ROM
1. I have HTC P3300 in france lang. I try many times to flash it in to ENG rom, whit every rom and USPL, RomUpdateUtility.......... without succes!
When I try to flash it, he started to 3% and the PDA he turnig OFF from self and on screen of flashing utility says: The image file is corrupted. Please check your update utility !!!!!!!!!
I need help to flash becouse every 5 or 15 min he restarted from self, white screen, blocking app, and cant be turned ON in next 1 hour!
What to do?
My PDA is:
P3300 Arte100
Version of ROM: 3.13.406.1 FRE
Date of rom 8/28/07
ver. radio 02.94.90
Ver. protocole: 4.1.13.44
WM6 Pro. Bulid 18125.0.4.2
Thanks anyway!

flash without memorycard and simcard in phone!
flashing with windows xp gives least problems!
use good rom (original rom of for example touch roms from meschle), maybe the error is in the rom you use!
always use uspl beforte flashing!
good luck

edje16mtg said:
flash without memorycard and simcard in phone!
flashing with windows xp gives least problems!
use good rom (original rom of for example touch roms from meschle), maybe the error is in the rom you use!
always use uspl beforte flashing!
good luck
Click to expand...
Click to collapse
Thankssss! I flashed my Artemis!

ROM Installing Problems

I am having problem installing WM 6.5 Rom,
after i flash my mobile when i try to install ROM form my pc it just says "Error"
i dont know what the problem iss
any advice would be helpful..
thank you very much

Hi
If you want help please give the information about your device details as HSpl which rom you are trying to flash. If you don't have HSPL installed then you won't be able to flash 6.5 rom.
therefore add more details from bootloader
Get bootloader is Vol Down + Stylus reset
Good luck

hi there
thanks for the replay..
my current Rom Verson: 2.03.831.2 WWE
Model: HTC Touch Diamond P3700

YoBRO said:
thanks for the replay..
my current Rom Verson: 2.03.831.2 WWE
Model: HTC Touch Diamond P3700
Click to expand...
Click to collapse
Thank you
Press and HOLD Vol Down and press reset then you will see tri colour screen
Give that information

I'm getting the same thing and I have:
SPL-1.93.OliNex installed on the system.
R 1.11.25.01
D 2.03.00.00
My phone is a Diamond P3700.
***************Update************
I figured out my issue. I had to copy the .nbh to the \internal storage root directory and then do the image install right from the phone. The PC ROMUpdateUtility wouldn't work for me.

Upgrading O2 XDA Ignito

Hi every one
I would like to thank every one in this forum for all the great help & support.
I have learned a lot from here on how to tweak my 1st windows mobile
My HTC is O2-UK branded :
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
Using O2 official ROM upgrade
[Xda Ignit2_UK_2.10.206.1_Radio_Signed_Diamond_52.62.25.34_1.13.25.24_Ship.exe]
What I want to do is just put a clean ROM (may be HTC original) without all the additional software that comes with the branded ROM
The reason for this is my windows folder is filled with unnecessary stuff that I can’t delete (like opera9 & some ringtones) which is taking some precious space (file properties show it's ROM files).
My question is:
1- Which HardSPL should I use?
I’ve read this great tutorial & I’ve gathered that I need Unsigned-Hard-SPL-Diamond-OliNex & this (correct me if I am wrong)
Thanks to cozzykim for his MiniTUT but does it matter if I have SPL 2.07 & install an older version (like Unsigned-Hard-SPL-Diamond-OliNex 1.40 or 1.93) or should I wait for an upload of SPL 2.07 ??
2- Does it matter if the SPL I install is signed or not when it comes to installing cooked ROMs in this forum vs official HTC ROMs ?
3- If I want to revert back to the stock ROM for warranty reasons, can I still do that? & how ? (revert back to same SPL & ROM) ?
I've got the extracted files from the official rom which include [01_SPL.nb] which is SPL-2.07.0000, (if anyone is interested I can upload it).
So can I reinstall this in future? or just run the full official ROM.exe installer to put everything back as it was (including original SPL)?
Before any one starts flaming about searching before opening a new thread, I did search (spent two weeks reading through different posts) & I did not find any mention (or upload) of Hard SPL 2.07 (only found 1.93).
I found previous threads with similar questions not answered so thought may be it's better to open a new thread than digging & bringing up a one year old thread.
Pardon me for my noobish questions but this is my 1st flash & I am sure it will be easier afterwards but I hope answering these questions will make it easier for noobs like me & to those with XDA ignito.
Any help is appreciated & if any moderator thinks this is a repeat post & should be closed then feel free to do so.

I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !

thangkls said:
I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !
Click to expand...
Click to collapse
Many thanks for the reply
One question though, does it matter if you have a newer SPL than 1.40?
I mean did you have the same SPL (1.40) before installing OliNex 1.40 or it doesn't really matter what version is in your phone?
(mine is 2.07 & I am not sure if it's ok to install an older version like 1.40 or 1.93)
Thanks

Ok I've done it
Same steps as thangkls
1. Hard SPL - used OliNex 1.40 [Unsigned-Hard-SPL-Diamond-OliNex].
2. Reset to bootloader to check Hard SPL .
3. Flashed with A.Z.T.O.R. Re-Evolution
& I must say, it looks great so far (especially the landscape feature).
I'll worry about the warranty later (though I think restoring a newer SPL 2.07 should work the same way, as explained here)
Thanks again for the help
Now am off to test all those ROMs .... wohoooooooo

Look at my signature:

Look at my signature
Actually this was the 2nd ROM on my list to test.
I liked A.Z.T.O.R. Re-Evolution but had to abandon due to a keyboard bug.
Gen.Y D2 R5.3 looks great with 15MB more storage space & same memory use.
No bugs so far.

Spl-2.07.0000
gsm 44
where can i get SPL-2.07.0000
previously i hav phone wid this specs
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
then i updated spl with hspl olinex
nd my spl changed
now i want to revert back to spl 2.07.0000
but how
i have gone back to spl 1.93 but not beyond that

ok i did it i got the spl 2.07.0000 back