Develop Bugs

[WM6 DOWNLOAD] REPACKAGED DOPOD WM6 3.54.707.3 Official. Works on ALL Hermes Devices

Since all you users seem to be posting useless topics about an RUU which wont work on the majority of Devices, heres one that DOES.
So you guys know this is the DOPOD release so it is taylored for a dopod 838 pro....your network settings will need to be added manually.
The standard RUU from dopod will not work if you have updated to HardSPL since it does not detect the SPL version as valid.
Please first Update to HardSPL (SPL 2.10.olipro) first as your device is at risk of bricking.
See how to do this update here.........then proceed to download and flash the WM6 ROM.
WM6 Dopod WWE 3.54.707.3
Repackaged with CustomRUU 4.3
This will flash to ANY Hermes device, select 'Autodetect' and off you go
Radio, IPL, SPL removed.
Rapidshare Link
MegaDownload Link

Thanks a lot
Thanks a lot sir.

Thx ! I'll try it !
OS version ?
Now i've got 5.2.1238 build 17913.0.3.0

Thanks!! downloading now ..

Thanks alot i wll try this once its down, Thanks Again

Many thanks.

Well in, as usual.

...
Thanks so much ....
It was like waiting in line for Star Wars ....

BlackBerry Connect
Anyone tried it yet with BlackBerry Connect?

Thanks a bunch
Downloading now.
I was experiencing some problems with the previously published version.
Cheers.

so did you say that the radio rom is removed from this? So is there good radio rom to use with this?

yak86 said:
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
Click to expand...
Click to collapse
Use whichever radio ROM you wish. The most current two radio versions released are 1.46.00.11 and 1.47.00.10.
NOTE: DO NOT flash without safeguarding against a brick with HardSPL.

WHat will have i to do when Dangaard will release the italian version of WM6?
Actually i flashed in my HErmes the Shnap's 3.30c pro WWE rom, and to do it i followed the Mrvanx guide to upgrade to HArdsppl 7 (olipro 2.10).
Have i to downgrade it or what?
thankyou

Hi All
Just wondering if anyone had a fix for the:
"Your current operator (23410) is not supported......"
I appreciate that you can just dismiss or "Don't show message again..."
I have installed the O2 Cab.

im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.

guyver2077 said:
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
Click to expand...
Click to collapse
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )

AlbertoM said:
Anyone tried it yet with BlackBerry Connect?
Click to expand...
Click to collapse
Did not work with BB connecct (using version 4) on Fido in Canada (i.e BIS)
- PIN OK, No connection
- No service list

Alternative download site please...
Thanks in advance.

this ROM has 27MB RAM, instead of 21MB...

Volpus said:
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
Click to expand...
Click to collapse
haha thanks.. much easier now... i was having a tough time with the ok button on the base...
Here is what my phone shows up:
IPL-1.01
HERM100
SPL-1.06

How to flash PDAVIET Rom Black&Blue v3.7

Subject: There are problems reported when flashing
PDAVIET Rom Black&Blue v3.7 For HTC Artemis & HTC Love ROM © by tom_codon
Issue: During flashing customized B&B v3.7 © (by tom_codon)
ROM, flasher stops at 3%-4%, stating - INVALID MODEL ID.
(it may other error messages appears as well, they are not analyzed yet)
Try following steps, it may solve your problem of flashing.
1. Download attached flasher;
2. Unrar to temp directory (like c:/XDA/);
3. Unrar ROM (TOM_Artemis_Black&Blue_v3.7.rar ©) to the same directory above;
4. Rename BB37.nbh file to RUU_signed.nbh;
5. Make sure usb cable is connected
6. Bring your device into bootloader
(http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets)
7. Start binary ROMUpdateUtility.exe, flash normally
Prerequisites:
- uspl is installed on your device;
- activesynch v.4.5 is installed (other version is not tested);
- os is win xp sp2 (other os were not tested);
Recommendations:
(as usual, best practice)
- always have original ROM for device before flashing;
- always have uspl installed before flashing;
: B&B v3.7 ROM does not re-flash SPL on Artemis. So, no need to re-flash uspl after flashing B&B v3.7 ROM.
OS, GSM, splash screen are re-flashed
hope this will help.
regards,

fdp24 said:
Subject: There are problems reported when flashing
PDAVIET Rom Black&Blue v3.7 For HTC Artemis & HTC Love ROM © by tom_codon
Issue: During flashing customized B&B v3.7 © (by tom_codon)
ROM, flasher stops at 3%-4%, stating - INVALID MODEL ID.
(it may other error messages appears as well, they are not analyzed yet)
Try following steps, it may solve your problem of flashing.
1. Download attached flasher;
2. Unrar to temp directory (like c:/XDA/);
3. Unrar ROM (TOM_Artemis_Black&Blue_v3.7.rar ©) to the same directory above;
4. Rename BB37.nbh file to RUU_signed.nbh;
5. Make sure usb cable is connected
6. Bring your device into bootloader
(http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets)
7. Start binary ROMUpdateUtility.exe, flash normally
Prerequisites:
- uspl is installed on your device;
- activesynch v.4.5 is installed (other version is not tested);
- os is win xp sp2 (other os were not tested);
Recommendations:
(as usual, best practice)
- always have original ROM for device before flashing;
- always have uspl installed before flashing;
: B&B v3.7 ROM does not re-flash SPL on Artemis. So, no need to re-flash uspl after flashing B&B v3.7 ROM.
OS, GSM, splash screen are re-flashed
hope this will help.
regards,
Click to expand...
Click to collapse
Thanks for your method.I want write it in my first post in Thead Rom Back&Blue v3.7 but u already writed it.Thanks again..

tom_codon:
it would be good to see response.
normally it should work.
regards,

Htc3300 non branded *does nto work for me*
I've read all the posts and cannot get past 3%
No problem installing 3.04
Can anyone help ... in particular someone with an unbranded device who has been successful with this
Thanks

http://htc.lan13.ro/ANDY_TOM_WM6_14072007_002.nbh
thats the one you need to try
http://forum.xda-developers.com/showthread.php?t=317160
read this post, and all will work fine

How to open .nbh file
Sorry if I should know this ..........
how do I open this file?
Thanks for your help with this

You guys are the best !!
Figured it out
Thanks a million

[email protected] said:
http://htc.lan13.ro/ANDY_TOM_WM6_14072007_002.nbh
thats the one you need to try
http://forum.xda-developers.com/showthread.php?t=317160
read this post, and all will work fine
Click to expand...
Click to collapse
Thanks man. After a lot of tries this thread help me to install BB3.7. You guys are great.

USPL
Hi all
I try to istall B&B but nothing on my xda orbit CID unlocked.
After upgrade to WM6 from 02 i return it to WM5 from O2, at 3% upgrade close, what is USPL and where i can found it?
Thank you

a40 said:
Hi all
I try to istall B&B but nothing on my xda orbit CID unlocked.
After upgrade to WM6 from 02 i return it to WM5 from O2, at 3% upgrade close, what is USPL and where i can found it?
Thank you
Click to expand...
Click to collapse
Link here:
http://forum.xda-developers.com/showthread.php?t=311403
please read in Forum..

tom_codon said:
Link here:
http://forum.xda-developers.com/showthread.php?t=311403
please read in Forum..
Click to expand...
Click to collapse
Thank you my friend

i want DopoD M700 update

i want DopoD M700 update

Try B&B4.3, u will impress with this rom.

Anyone know where I can get the Dopod M700 CHT Rom beside from DopodAsia? Thanks!

Does B&B4.3 for artemis / P800 ? the buttons are different..
M700 got different buttons alocation. No GPS.
I'm looking for WM6.1 Vanilla specific for Dopod M700 only
-

I'm using Dopod M700 too.
You can use Black & Blue 4.3 or 5.0 (but 4.3 is better) or the best one is Artemis Touch 4.01 (or maybe 4.02 better, I'm testing 4.02).
All of them work good with GPS
Those ROM is for Artemis & Dopod M700 is Love, so you have to change the button setting, it is so easy.

Ok, I found the Dopod P800W CHT Rom from somewhere and flashed my Dopod M700 by editing the hex file to match the Model ID. However, after flashing the Dopod P800W CHT Rom, my Dopod doesn't show EDGE connection but just GPRS. I'm sure that it was EDGE connection with my previous ROM. Anyone know how to get back to EDGE connection? My previous ROM and current ROM are:
Previous ROM:
LOVE 1.3 WEN WWE
Rom Date: 16/11/07
Radio Ver: 03.07.90
Protocol Ver: 4.1.13.51
Current ROM: (File Name: P800w_TW_CHT_WM6_Upgrade_20070713)
3.7.709.1 CHT
Rom Date: 21/6/07
Radio Ver: 2.67.90
Protocol Ver: 4.1.13.51
Ext_Rom Ver: 3.6.709.101
Even I flashed the radio Rom to 03.07.90 or 03.12.90, the connection still at GPRS status. Even the Model of P800W and M700 are EDGE unabled in Taiwan. Therefore, I don't know why the EDGE doesn't appear on my connection.

thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance

You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.

Pardoon said:
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
Click to expand...
Click to collapse
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..

lamjeff said:
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
Click to expand...
Click to collapse
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.

tan880121 said:
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Click to expand...
Click to collapse
i have already update the spl to 1.11... btw, can u let me know how to go to serivce mode ..... coz right now i try to use usb cable to connect the pc... no response.... help help

y_bother said:
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
Click to expand...
Click to collapse
Thanks for your information... I have work on this machine over 10 hrs to search over the forum here.... at last i can flash it when i press record and reset button and at the same time connect with usb cable ...... after that i can flash it thru PC ...........
tks...

Upgrading O2 XDA Ignito

Hi every one
I would like to thank every one in this forum for all the great help & support.
I have learned a lot from here on how to tweak my 1st windows mobile
My HTC is O2-UK branded :
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
Using O2 official ROM upgrade
[Xda Ignit2_UK_2.10.206.1_Radio_Signed_Diamond_52.62.25.34_1.13.25.24_Ship.exe]
What I want to do is just put a clean ROM (may be HTC original) without all the additional software that comes with the branded ROM
The reason for this is my windows folder is filled with unnecessary stuff that I can’t delete (like opera9 & some ringtones) which is taking some precious space (file properties show it's ROM files).
My question is:
1- Which HardSPL should I use?
I’ve read this great tutorial & I’ve gathered that I need Unsigned-Hard-SPL-Diamond-OliNex & this (correct me if I am wrong)
Thanks to cozzykim for his MiniTUT but does it matter if I have SPL 2.07 & install an older version (like Unsigned-Hard-SPL-Diamond-OliNex 1.40 or 1.93) or should I wait for an upload of SPL 2.07 ??
2- Does it matter if the SPL I install is signed or not when it comes to installing cooked ROMs in this forum vs official HTC ROMs ?
3- If I want to revert back to the stock ROM for warranty reasons, can I still do that? & how ? (revert back to same SPL & ROM) ?
I've got the extracted files from the official rom which include [01_SPL.nb] which is SPL-2.07.0000, (if anyone is interested I can upload it).
So can I reinstall this in future? or just run the full official ROM.exe installer to put everything back as it was (including original SPL)?
Before any one starts flaming about searching before opening a new thread, I did search (spent two weeks reading through different posts) & I did not find any mention (or upload) of Hard SPL 2.07 (only found 1.93).
I found previous threads with similar questions not answered so thought may be it's better to open a new thread than digging & bringing up a one year old thread.
Pardon me for my noobish questions but this is my 1st flash & I am sure it will be easier afterwards but I hope answering these questions will make it easier for noobs like me & to those with XDA ignito.
Any help is appreciated & if any moderator thinks this is a repeat post & should be closed then feel free to do so.

I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !

thangkls said:
I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !
Click to expand...
Click to collapse
Many thanks for the reply
One question though, does it matter if you have a newer SPL than 1.40?
I mean did you have the same SPL (1.40) before installing OliNex 1.40 or it doesn't really matter what version is in your phone?
(mine is 2.07 & I am not sure if it's ok to install an older version like 1.40 or 1.93)
Thanks

Ok I've done it
Same steps as thangkls
1. Hard SPL - used OliNex 1.40 [Unsigned-Hard-SPL-Diamond-OliNex].
2. Reset to bootloader to check Hard SPL .
3. Flashed with A.Z.T.O.R. Re-Evolution
& I must say, it looks great so far (especially the landscape feature).
I'll worry about the warranty later (though I think restoring a newer SPL 2.07 should work the same way, as explained here)
Thanks again for the help
Now am off to test all those ROMs .... wohoooooooo

Look at my signature:

Look at my signature
Actually this was the 2nd ROM on my list to test.
I liked A.Z.T.O.R. Re-Evolution but had to abandon due to a keyboard bug.
Gen.Y D2 R5.3 looks great with 15MB more storage space & same memory use.
No bugs so far.

Spl-2.07.0000
gsm 44
where can i get SPL-2.07.0000
previously i hav phone wid this specs
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
then i updated spl with hspl olinex
nd my spl changed
now i want to revert back to spl 2.07.0000
but how
i have gone back to spl 1.93 but not beyond that

ok i did it i got the spl 2.07.0000 back

dimanod stuck on boot ( please help ! )

i used hard spl 1.4 olinex and sucessfully
then i upgraded radio to 1.00.25.05
and then in installed wmpoweruser new 6.5.3 rom
but after flashing phone stucked on touch diamond screen and nothing happens.whats the probelm ? please help me.is for one my freinds and i promised a good rom to him and now its broken.

Use mtty procedure from this post: http://forum.xda-developers.com/showthread.php?t=540290
Or more simple write a original htc rom.

lordsinasina said:
i used hard spl 1.4 olinex and sucessfully
then i upgraded radio to 1.00.25.05
and then in installed wmpoweruser new 6.5.3 rom
but after flashing phone stucked on touch diamond screen and nothing happens.whats the probelm ? please help me.is for one my freinds and i promised a good rom to him and now its broken.
Click to expand...
Click to collapse
hard reset the device once and boot again.... post back if its stuck... will see what we can do..