Develop Bugs

NEW ROMs ready for DOWNLOAD from imate FTP site!!

WWE rom (world wide english, I believe)
ftp://ftp.clubimate.com/JASJAR_WWE_13076_164_10900_wwe_ship.zip
italian rom
ftp://ftp.clubimate.com/JASJAR_ITA_13081_169_10900_ita_ship.zip
'ME' means what? (middle east?)
ftp://ftp.clubimate.com/JASJAR_ME_13082_171_10900_wwe_ship.zip
'SA' means what? (south africa?)
ftp://ftp.clubimate.com/JASJAR_SA_13082_170_10900_wwe_ship.zip
FYI, downloads VERY, but VERY SLOW!!! has somebody upload it into the xda-developers FTP server?

Hi,
Are these the official release or another test?
I hate to switch to the I-mate ROM if these are just the test ROMs. Thanks for posting.

ship on the end suggests its final, as the older jasjar roms are no longer on the ftp

Is there any change that this ROM suport A2DP ?

moghisi101 is downloading the WWE version, he suggested waiting for him to upload it here as the IMATE ftp is slow enoguh without all of us trying to download it at the same time. I can't wait to test it!

wrong forum, to early in the morning, sorry...
interesting, downloading now. bugger, i just did the beta rom earlier this week, now i have to do it all again.
i wonder what the final differences were between beta and final...

is this the final version.........without test etc. like the first released version?

What a great news!!!
Hope it include A2DP.
Cheers,

Upgrade in progress !

Done, the Push is here, but not the BT stuff, worked well, will soon cook the Ex Rom. Also the Radio 1.09.00 is there no need to "cook" the installation, now how can we remove this Battery icon for the clock ?
Cheers

Get off the ftp and go to this link to get the http: much faster download. I'm getting 128 kb so about 7 minutes total download time.
http://www.clubimate.com/support/JASJAR/ROM/JASJAR_WWE_13076_164_10900_wwe_ship.zip

The Italian version on the ftp site gives 'country id error' with my original Italian jasjar, so it is not ready or not Italian.

just flashed the new ROM and made a hard reset ... the device is totally dead!!! .... the hard reset menu is active, but nothing happens after pressing zero ... any ideas ??? :evil: :evil: :evil: :evil:

Biso007 said:
just flashed the new ROM and made a hard reset ... the device is totally dead!!! .... the hard reset menu is active, but nothing happens after pressing zero ... any ideas ??? :evil: :evil: :evil: :evil:
Click to expand...
Click to collapse
Try to remove the SD and the Sim cards and repeat the update.

My device went dead yesterday when i tryed to flash the new rom, tryed every thing ... nothing
But this morning i manage to put it in bootloader mode, and flash it again and it went ok, is now working with the new rom.

Anyone figured out yet if these ROMs are official?
Is the SA one for South Africa?

VIPPER2004 said:
My device went dead yesterday when i tryed to flash the new rom, tryed every thing ... nothing
But this morning i manage to put it in bootloader mode, and flash it again and it went ok, is now working with the new rom.
Click to expand...
Click to collapse
Hi ... how did you manage to get to the bootloader mode ? ... I have a blank black screen and the PC doesn't recignize the device at all

i really dont understand all these issues that people have re-flashing, mine went perfectly with the beta and the "ship" release.
which by the way still isnt actually on the site yet, so dont know what they are playing at.
seemed to work fine for me, and the Fn -> works now...
I would have thought imate to imate shouldnt cause any problems whatsoever and should work really smoothly, but i noted that some with the issue were imate upgraders, so tell me, what did you do or not do?

Can someone list what is new in this ROM???
THanks very much.
Cheers,

nothing but the usual ... conncted the device and ran the upgrade file ... finsihed smoothly ... made a hard reset and here I am with a blank black screen .. BTW, the hard reset menu doesn't show up either :evil: :evil: :evil:

Dopod d810 WM6 ROM Officially Released again!

So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Seeing as I'm downloading at a good speed I'm assuming this hasn't been posted as yet.
A rapidshare copy is now also available:
http://rapidshare.com/files/4681657..._WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
If anyone has any other mirrors please PM me and I will add then to this post.
(PS. Admins, I thought I would start a new thread for this as the old one is up to about 35 pages)
FAQ:
====
Q1: Is This the ANZ Version or the SEA Version:
A1: This seems to be the ANZ version as it is from the ANZ site and the description of the HTC download site is: "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
Q2: I'm having trouble downloading off the HTC link, what should I do?
A2: There is a rapidshare link above, try that. If you are still having trouble PM me.
Q3: What is the difference between this version and the one released a couple of weeks ago?
A3: This is two minor revisions later - This previous release was 3.00.707.16. this is 18. Hopefully this fixed the problem some people were having with upgrading getting stuck at ~30%. EDIT: So far several people are still having this problem.
Q4: Does this ROM fix the TomTom bug involving the device code changing on each hard reset?
A4: According to a post on page 2 it does!
Q5: Is there a new SEA release?
A5: It appears HTC have re-released the same SEA rom with a new date. This seems to make sense as the problem with the original rom was partially related the 3 Australia.
Q6: Will this rom work on devices other than once branded as Dopod d810?
A6: It should, although you will need to remove the service provider lock (SPL) from your device first. Further information can be found here (do some searching and research prior to using this):
http://forum.xda-developers.com/showthread.php?t=299659&highlight=hard-spl
Q7: What is the deal with the languages?
A7: This is the World Wide English (WWE) edition which basically means it is in english. You can install this over a device which is in another language however you device will then be in english.
Q8: Will installing Hard-SPL (see Q6) void my warranty?
A8: Short answer is yet. However, you should be able to switch back to your original firmware etc prior to sending the device in for a warranty repair so you should be able to fool them.
Q9: Does this rom come with office and acrobat etc?
A9: It comes with Acrobat Reader LE and Office.
Q10: Can I read office 2007 files on my PDA with this ROM:
A10: Yes, you need this file:
http://forum.xda-developers.com/showthread.php?t=310832
Note, the link on the original post is dead, have a look at this post for the link:
http://forum.xda-developers.com/showpost.php?p=1402146&postcount=55
Thats all for now folks.
Oh yeah, shameless plug... If you need a theme for your windows mobile device (WM5 or WM6) please visit my website http://www.wm6themes.com You can also request a personalized theme on the site completely free (just upload an image and I'll create a theme for you)!

Work on HTC P3600?
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks

jetlagjoe said:
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it will work if your phone is SP unlocked. (Can't tell you 100% though)

A Rapidshare link has now been added for anyone having trouble with the dopod link. Rapidshare link is located in the original post.

Is this the SEA or ANZ version?

Not sure which it is. I got if off the ANZ site so I assume either they've unified them or it is ANZ.
EDIT: Just copied this of the dopod site so I assume it is ANZ - "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
EDIT2: If anyone does have links to the SEA version please post it here and I will add it to the initial post.

grahamrb said:
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Click to expand...
Click to collapse
This is a repost of ANZ Rom, with radio shipped on ANZ before and some minor change in the OS, probably a bugfix.
Main Changes:
in Application, OEMAPPS
StreamingPlayer
VideoStub
Streaming Video is now called Streaming Media
DLL
In OEMAPPS
Rtsphandler.dll
in OEMDRIVERS
rilgsm.dll
wavedev.dll
Removed CommManagerRes_dll.cab
All the other files seem to be the same: there are 1175 different files but as to me it is due to a new packaging.
The most interesting part, except streaming media, are the two new drivers rilgsm.dll and wavedev.dll
I'm trying to install these different files on my device... wavedev.dll seem to have cause my trinity to stuck at the animated boot screen with sound (a personal hack in the registry). After a soft reset the animated boot screen has been disabled. Rilgms.dll should be related to radio search and roaming switching, and probably is installed to support the new radio shipped. I've radio 1.46.00.11 and can't turn on the phone anymore
All the above is a mine investigation, if you think I'm wrong you can correct me. I'm open to learn more...
Ciao

Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,

itlinux said:
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
Click to expand...
Click to collapse
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao

Is there also a new SEA version. I don't have a Dopod device so my P3600 EMEI does not allow a download.

claros said:
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Click to expand...
Click to collapse
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...

itlinux said:
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
Click to expand...
Click to collapse
No, i din't made the update and you don't need to remove any dll.
If you want you can install it, if your device id supercid. But probably you will not found any difference from the one you are using, apart from streaming media that i've never used...
Ciao e buonanotte, mi è passata la sbronza e vado a letto...

I cannot find a new SEA rom. They changed the ROM date in the website - D810 WM6 English Version Upgrade code (2007/07/10), but if you try to download it goes to the same file - D810_SEA_WM6_Upgrade_20070709 - released before.

Fixes TomTom bug and works on UK Orange SPV M700
Hi all,
Having installed this ROM last night, I just thought I would let you all know the following:-
1. It FIXES the TomTom bug/incompatability whereby the Device Code keeps changing each time you Hard Reset! For me, this is *the* MOST important fix.
2. It works perfectly on the UK Orange SPV M700 version of the Trinity. In fact, there is no need for SuperCID or any of that lark, just unlock the phone from Orange (using the sticky thread in the Trinity Upgrading forum) and away you go. My advice is to press the Reset button right at the end of the initial date/time/screen alignment setup to stop it installing the Extended ROM.
3. This is the ANZ (Aus/NZ) version of the ROM, but it IS WWE (World Wide English)
I've only been running it and using for a few hours, but currently, all seems good. Definitely worth trying I'd say.
Regards, Moz.

I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?

Vilem said:
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Click to expand...
Click to collapse
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip

tukan said:
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
Click to expand...
Click to collapse
What's the difference ?

Vilem said:
What's the difference ?
Click to expand...
Click to collapse
After this step you can flash the "NEW Dopod d810 WM6 ROM" without the 28% error.

I got several questions:
1. Can I also install it on a P3600 with German language (I know that it is in English then, but that´s better anyway)?
2. My Triny is not branded (bought from Amazon). This won´t be a problem?
3. Is it branded then, because it´s a Dopod Version?
4. Can I still install German programs like the German Tom Tom or Langenscheidt Dictionaries or do I need new versions for WM6 and/or the English BS?
5. Is a English PDA compatible with German Outlook
6. Is also Office Mobile, Acrobat etc. onboard?
7. Will I loose my guarantee?
8. Can I go back to the official German WM5 in case of Problems?
9. Can I use this Update straight from my Vista PC or do I also need to change some dll´s?
10. Are any functions like European 3G etc. disabled, when installing this Australian version?
11. When the update stucks at a certain %, can I still update the other rom to use this update later or do I have a problem then?
Please, forgive me that I post so many questions.
Thank you so much for your answers.

Ok i removed ipl and spl from this rom , changed spash screens and flashed with customRUU.
Working fine so far.

HELP my PDA not working after Schap's WM6.1 Pro 4.40 Beta ROM

I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................

You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir

thanks for the quick respond

tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).

The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.

Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien

juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2

TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?

i have the screen with color but during the update i have the error27O "the image file is corrupt..."

juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?

yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages

I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...

juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.

iMate Ultimate 8502 & 9502 WM6.1 1.77 Downloads

As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun

Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip

thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend​

does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?

hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]

dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos

casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!

dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos

Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms

borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos

Thx mate

Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks

XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos

Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much

konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude

casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic

ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos

casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan

help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks

suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos

New version on my p3300. help!

Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!

Dragon-Fly said:
Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Click to expand...
Click to collapse
Ok....you have a big problem..
I've read that if you have a fading screen,you might have your motherboard faulty.
So grab a phone and run to HTC repair center while you still have warranty.
cheers....
Z

Hmm, but all other fuctions on my phone are working correct. I may have given the inpression that is happens all the time but it ain't. Sometimes such as after a call, my screen turns black and if i hit the reset button the screen lights up an than it fades out. That made me believe that is is a software problem, so a newer version of WM may be a solution, or not?
Thanks but, does someone has an idea, or anser to my questions?

It seems hardware related, though if u want to flash another rom, u can check the USPL thread on Artemis upgrading section, then flash the rom u want.
Good luck.