Develop Bugs

[WM6 DOWNLOAD] REPACKAGED DOPOD WM6 3.54.707.3 Official. Works on ALL Hermes Devices

Since all you users seem to be posting useless topics about an RUU which wont work on the majority of Devices, heres one that DOES.
So you guys know this is the DOPOD release so it is taylored for a dopod 838 pro....your network settings will need to be added manually.
The standard RUU from dopod will not work if you have updated to HardSPL since it does not detect the SPL version as valid.
Please first Update to HardSPL (SPL 2.10.olipro) first as your device is at risk of bricking.
See how to do this update here.........then proceed to download and flash the WM6 ROM.
WM6 Dopod WWE 3.54.707.3
Repackaged with CustomRUU 4.3
This will flash to ANY Hermes device, select 'Autodetect' and off you go
Radio, IPL, SPL removed.
Rapidshare Link
MegaDownload Link

Thanks a lot
Thanks a lot sir.

Thx ! I'll try it !
OS version ?
Now i've got 5.2.1238 build 17913.0.3.0

Thanks!! downloading now ..

Thanks alot i wll try this once its down, Thanks Again

Many thanks.

Well in, as usual.

...
Thanks so much ....
It was like waiting in line for Star Wars ....

BlackBerry Connect
Anyone tried it yet with BlackBerry Connect?

Thanks a bunch
Downloading now.
I was experiencing some problems with the previously published version.
Cheers.

so did you say that the radio rom is removed from this? So is there good radio rom to use with this?

yak86 said:
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
Click to expand...
Click to collapse
Use whichever radio ROM you wish. The most current two radio versions released are 1.46.00.11 and 1.47.00.10.
NOTE: DO NOT flash without safeguarding against a brick with HardSPL.

WHat will have i to do when Dangaard will release the italian version of WM6?
Actually i flashed in my HErmes the Shnap's 3.30c pro WWE rom, and to do it i followed the Mrvanx guide to upgrade to HArdsppl 7 (olipro 2.10).
Have i to downgrade it or what?
thankyou

Hi All
Just wondering if anyone had a fix for the:
"Your current operator (23410) is not supported......"
I appreciate that you can just dismiss or "Don't show message again..."
I have installed the O2 Cab.

im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.

guyver2077 said:
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
Click to expand...
Click to collapse
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )

AlbertoM said:
Anyone tried it yet with BlackBerry Connect?
Click to expand...
Click to collapse
Did not work with BB connecct (using version 4) on Fido in Canada (i.e BIS)
- PIN OK, No connection
- No service list

Alternative download site please...
Thanks in advance.

this ROM has 27MB RAM, instead of 21MB...

Volpus said:
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
Click to expand...
Click to collapse
haha thanks.. much easier now... i was having a tough time with the ok button on the base...
Here is what my phone shows up:
IPL-1.01
HERM100
SPL-1.06

HELP my PDA not working after Schap's WM6.1 Pro 4.40 Beta ROM

I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................

You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir

thanks for the quick respond

tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).

The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.

Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien

juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2

TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?

i have the screen with color but during the update i have the error27O "the image file is corrupt..."

juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?

yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages

I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...

juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.

Newby - SPV M700 -> WM6 question

Hi all - sorry about this, but I'm new to this. Got an Orange M700 - still running the original Orange branded WM5 OS: yup, Orange have mangled it. I've been reading the (many...many...many) threads and the wiki and... well I think I'm more confused than ever.
So, just wondering if someone can advise me on the best route to upgrade, and bear in mind I'm a graphics guy....
So, briefly
from the Orange WM5, is there a straight one-step upgrade to WM6?
What .cabs/versions should I be looking for? -> I know there are many you guys have tuned. I guess I'm looking for a fairly standard one? Unless you think otherwise!
Are there any major caveats (other than warranty/support invalidation)?
Need a little hand-holding...
Thanks in advance.

Hi, welcome..
I have M700 too, took the plunge a while back and loaded one of Mun's ROM's.
All I did was install activsync onto my pc and hook up the phone for the first time, once that ran its course I unplugged the phone powered down and removed the sim & sd card and then powered back up again.
Once up n running I plugged it back into the pc and ran the rom I had chosen, yes I was worried it might go wrong but I have to say it was and is very simple n straight forward. There is a WM5 Orange backup rom on here so if you ever did need to send back then you can flash this back onto the phone so it "looks" normal, tbh I'd doubt it would come to that.
I was using XP-SP2 at the time, not sure of anything different for Vista but that's where others here will put you straight, since then I have altered rom many a time and finally settled for Tom's Black'n'Blue - nice and fast and room to add what I want to add rather than be given. Oh and also update the radio rom to the latest version too, pretty much the same method.
Have a look at the roms and decide what you want Happy modding...

Only "gotcha" try and flash from XP, it is rumored to be problematic on a vista PC.
Also be warned flashing ROMs can be addictive, think i have tried 8 or 9 on my Trinity to find one i like, have yet to try the MUN one suggested in the previous post, looks like it will be next.

Ah, twas an early Mun rom and was WM5 - like I said the very first rom I'd flashed so I wouldn't flash to that now

Also realised why i hadn't tried it, i have tried several 6.1 ROMs and none of the WM6 ones. Probably will now i think about it though.

spv m700
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.

Mattster_spv said:
Just joined the forum, thought I'd say hi.
I've just bought an spv m700 (following 2 years of the great spv m600), mainly because I wanted inbuilt gps.
The previous owner flashed it with Windows Mobile 6.1, I've yet to really test it.
First of all, I'm going to re-install all my Spb software (spb time, spb backup, spb mobile shell, etc) and transfer contacts etc via active sync.
If anyone has any advice or tips n tricks that you feel may benefit me, I'm all ears.
Cheers,
Matt.
Click to expand...
Click to collapse
First of all, welcome!
You have to know that the key to knowledge is searching, reading, and if none of those work, asking through posting!
So, happy enlightment and enjoy your device!

OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy

nealed said:
OK Monkeybox - hold out your hand - here's mine.
First thing - choose a ROM (sorry, you'll need to make your own choices). Judging by what you have said a LITE ROM would suit your needs.
I have tried most trinity ROMS. I like ADW's ROMs, am currently on Akeo's ROM but have tried LVSW, mUn, black and blue, PDAVIET, FInixNOver, ervius etc etc etc (Sorry if I've tried and forgotten your ROM!). Once you have your ROM, you should unlock the phone
1. (Hard-SPL - Service Providor Lock). http://forum.xda-developers.com/showthread.php?t=299659 This will enable you to flash a ROM with different carrier ID to you SPV M700. OK - Once you have hard-spl'd your phone, find the RUU (Rom Update Utility) exe file within the ROm that you downloaded.
2. Connect your phone (windows XP is best) using activesync and when activesync is connected, run the RUU Updater. The phone will switch off and go into "bootloader" (coloured bars on screen). If you get a connection error here, just run the RUU updater again. this time things should get going. When finished - your new ROM is installed - no more Orange!
3. Next update the Radio - search xda-developers.com using google for Trinity Radio - and choose 1.46 or 1.5x.
4. Install missing software (generally you'll need a GPS navigation software at least).
5. Enjoy.
6. If you like a ROM - donate to the cooker
7. Get a flashing addiction
8. Read all of the Kitchen threads
9. Cook your own ROM
10. Share it with us
11. Be eternally happy
Click to expand...
Click to collapse
Thank you, and all others who have responded, for your greatly appreciated advice! I've been trying to get my head around the process. Have backed up using PIM backup and settings saviour... and with your hand holding, am about to dive into the world of modding!
It's a little daunting for a newbie (and I really do mean a newbie!), but with everyones help, and this fantastic community as a resource, bah, watch me fly! (I'll probably be back tomorrow asking how I can de-brick the phone ;O) )
Thanks again all.

Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...

mkOnKeY bOy said:
Cool. Upgraded to WM6.1 - Akeos latest black one.
Have to say the functionallity is 10 times better already. Upgraded to the latest radio too.
HOWEVER... and this is where the newbie kicks in, I can't seem to start any data sessions. IN COmm manager I don't have the option to turn the data connection on (this was also the same prior to the radio upgrade)
Don't suppose anyone knows how to resolve this do they?
As I say, taking my first steps on the modding ladder, and it appears I may have slipped...
Click to expand...
Click to collapse
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.

tnyynt said:
You have to define your data connection from "Start, Settings, Connections, Connections, My ISP, Add new" according to your carrier (ie GPRS, 3G). Same goes to configuring MMS, just that you do it at "Start, Settings, Connections, Connections, My Work Connection" and you also have to define it in Arcsoft MMS.
You will not be able to start them from the CommManager as they connect on demand as needed, but you can STOP the in the CommManager when they are connected since they don't disconnect automatically.
Click to expand...
Click to collapse
Once more, thanks to all who've helped me over the threshold - the data connection must have been an issue with the signal, as this morning it was happy to connect to mms/internet via 3G/GPRS and HSDPA (which I didn't even know Orange supported).
Cheers all. Your help has been absolutely spot-on. It's refreshing to come to a community where you not only happy to help newbies, without the usual sarcasm or pomposity you find elsewhere, but you do so in a clear and concise way that really does help.
Thanks all. Look what you've gone and started now... !!!
One happy newbie stepping out into a brave new world...

---edit---
please delete this post

have fun with your spv

I have a problem, and the more I search the forums, the more I worry it may be due to an upgraded Rom.
The original owner of the spv m700 I just bought has by the looks of it debranded it and installed WM 6.1:
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
With Tomtom 6 installed and seemingly working, the GPS receiver is not being detected. I have done what the forums say, i.e. selected "NMEA GPC receiver", get a screen with:
COM3: GPS in COM9
COM7: RIL on COM6:
S2410 IRDA
I have clicked on the first option (COM 9 is recommended), but still no GPS device found, indoors or out, after 10 minutes of trying
Like I say, much info says the above should solve it, but others say an upgrade can knock out the GPS and it needs to have a different ROM reinstalled. Never done this before, and there may be an easier solution?
Help anyone.... please.......?!

I'm not 100% sure but I think your radio rom needs upgrading to support GPS - I'm sure the one's that do have 11 at the end of them..

Really?? It would be great to finally reach a soultion!
Can someone verify if this is true and if so, what do I have to do??
Thanks.

Hi Monkey Boy and all.
I think I'm in a similar situation that you were...
The original owner of my new spv m700 debranded it, unlocked it (by flashing an old radio ROM) installed WM 6.1. I now fear that the reason tomtom detests no GPS device is because the radio may need updating too... (see below for the spec on my phone at the moment).
Have you discovered which is the best radio to update to?
Device name: HTC_P3600i
Model NO: TRIN100
Windows Mobile 6.1 Professional
ROM version 3.03.751.5
ROM Date: 04/01/08
Radio Version: 1.16.00.00
Protocol Version: 32.53.7018.01H
All advice and recommendations welcomed. I have never flashed anthing before so this is all new to me, but I like to think I learn fast...
Thanks,
Matt

http://forum.xda-developers.com/showthread.php?t=293957
Original owner would have done this to unlock it, so all you have to do is search for the latest radio rom and flash that to your phone - there are guides how to do this in here..
Radio ROM
http://forum.xda-developers.com/showthread.php?t=325197&highlight=radio+flashing
Guides
http://trinityguides.info/index.php?option=com_content&task=category&sectionid=4&id=31&Itemid=66

Hey Trixter.
Thanks for the reply.
I managed to get in touch with the original owner and he sent me a link to an an .exe file which I downloaded, ran whilst activesynced to my phone, and voila! I now have radio ROM 1.50.08.11. Tomtom 6.03 now successfully works using settings "other NMEA GPS receiver" with "GPS baud rate 115200" and "GPS in Com9"!
I'm a novice and bought the phone as a "pimped up" spv m700. But I'm learning loads since joining thanks to people like your good self answering posts, so thanks.
Matt
Thanks to seeing your signature I'm sorted! If you read anyone else with the same problem, I hope my experience helps them.
Thanks again for your time,
Matt.

HP 614 upgrade to Windows Mobile 6.1??

Does anyone upgrade HP 614 to WM6.1?
Thanks!

any updates?

It's rom upgrade.
Thanks to Yevg001 from www.israpda.com
http://rapidshare.com/files/127265775/614c_WM61_19214.rar
pass:israpda.com
Sorry for my broken english.
This is link to post but on russian http://forum.israpda.com/viewtopic.php?p=60290#p60290 and for download you need regestred on forum.
So i think lin to dowmload it's ok!
UnRAR file to SDcard but not SDHC (not work) turn off device.
Push to record + mute buttons both and keep pushed. Push to power button and dismiss.
After you see SDLoder on display put device on table and wait for resume process.
After upgrade wait for windows logo and start yor's device.

Many thanks, I was searching for this for so long!!!
Just a couple of questions
1.It's on english?
2.It's works?
Do you know how to backup the original ROM before update?
thanks

1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!

igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
It works really very well.
Big thanks to Yevg001!!!
Keep up the fantastic work!
If there are any news, please let us know immediately!

This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153

Not work the link.
Please put another link.

muntean.calin said:
Not work the link.
Please put another link.
Click to expand...
Click to collapse
Link from rapishare is working, already downloading , I'll install tomorrow and make a report ASAP.

igorslon said:
This is new ROM upgrade
http://rapidshare.com/files/129473784/WM6.1_19214-fix.rar.html
pass: israpda.com
Fixed BLUETUOOTH data recive. + Q-GPS,Disconnect GPRS button and any more...
All TNKS to Yevg001 from http://israpda.com
http://forum.israpda.com/posting.php?mode=quote&f=89&p=61153
Click to expand...
Click to collapse
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...

Atlus said:
I have installed the new version, Bluetooth problem persist.
- I can sent files and make data connections, but I can't receive files.
- GPS working, not testing for a long time to test lost of connection...
Click to expand...
Click to collapse
Did you try to activate "receive all incoming beam" under connection settings?

Thanks for report, it doesn't look like a stead version.

bigu1975 said:
Did you try to activate "receive all incoming beam" under connection settings?
Click to expand...
Click to collapse
Many thanks, that was the problem, I think Incoming Beans referred to IR, as per my other device.
It now works great!!!
I recommend the update. :
-More stable
-faster than WM6.0
-SMS threaded

igorslon said:
1.It's on english?-Yes!!!
2.It's works?-Yes!!! Very good!!!More quickly the original!!!!
http://rapidshare.com/files/115715707/IPAQ_614c_ROMCode_WM6.0_18125.0.4.2_OFFICIAL_EN.rar.html - This is original ROM.
http://rapidshare.com/files/117446317/ipaq614c-mod_Yevg001-v1.0.rar.html - This is original two but Without different dust:
pictures,demo video and...
Pass:israpda.com
Regards to Yevg001 from www.israpda.com
And this program small but super utiliti http://rapidshare.com/files/127890053/qgps.rar.html
enjoy!!!
Click to expand...
Click to collapse
Hi Igor,
I have a 614c since end of March and 3 more around me (of friends) all running on Cellcom SIM. It seems that the ROM does not have Cellcom as a listed service provider.
Since work with HP on a new ROM and have a beta ROM installed on my unit HP asked a few time is there a STD (Sleep Till Death) problem in an Orange SIM, bacause many customers compain about this besides the BT volume and AGC problem. Can you say some thing. Further more, what Hebew are you using on 6 and 6.1.
Thanks
Nir

Hello everyone,
Hi I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance

analyzer.x said:
Hello everyone,
I just purchased the HP iPAQ 612c from Australia, This is my first PDA. So I am still kind of a beginner when it comes to updating roms n stuff but I don't plan to use my new PDA at all before I learn couple of things.
so I hope you'd be kind enough to help me out to get me started on this. I downloaded the latest WM 6.1 rom update and the original Rom as well but I will not be touching that before I can create my own back up and be able to restore it. The following questions are pretty much related.
1- I would like to know if there is a software that can run from my PC (not from the PDA) and backup or image the PDA Rom and contents to a file on my PC just like what I do with Ghost and my PC.
so what is the best way to back up a rom and how do I restore one (specifically for this device anyway)
2- are there any tuts I can look at.
3- Finally but most importantly what are the tools that a hardcore developer uses to do this kind of complex back up and restore, how do I create a flash.dio file like the WM 6.1 update and restore.
I am a .NET developer but never done anything for PDA's just yet. I really googled for couple of hours but couldn't find the right tools.
Thanking you in advance
Click to expand...
Click to collapse
Origimal ROM http://forum.xda-developers.com/report.php?p=2374906
And this a new ROM upgrade from Yevg001 www.israpda.com
http://rapidshare.com/files/131025566/WM6.1_19965_19965.rar.html
pass:israpda.com

Hi igorslon,
Thanks for reply.
However, hmm I am not sure how that answers any of my questions, I already have the files from these links, I am just not sure how to use them.
Again how do I begin to create a flash.dio for example?
I came across XDAtools
http://wiki.xda-developers.com/index.php?pagename=CompleteTools
but I am not sure how I can use it to back up my rom to a file.
any practical help please would be much appreciated. Thanks

Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z

ZiCoN said:
Hi guys
I'm considering installing this ROM.
One question though. Are there any other XT9 languages than the English, Italian and Spanish that are in the original?
Z
Click to expand...
Click to collapse
No are the same

Thanks for the quick respons

Imate ultimate 8150 WM6.1 official rom WWE

imate site make many step to take it !
now i uploaded to mediafire , anyone get 8150 and lockcode from the box can upgrade OS without register
http://www.mediafire.com/?zdxtwnzyv2g
hope some one find the way to upgrade imate os over NBF and SD card because when i put reset while hold a softkey it said SD and MMC mode ==> we have a chance to do it

sorry ! wrong file ! i fix it now pls wait 30m

http://www.mediafire.com/?wmtdzhzn20m

done....
ive already DL from imate which required registering...indeed it was a long process...this is what ive noticed with the new official rom:
1. a little faster than the wm6
2. they changed power settings, it now indicates how many percentage left..
3. imate also changed the mms manager...and it sucks! ive tested it and as per preference, the Arcsoft mms is much better than the new one in wm 6.1..(mms wm6- separates SMS from MMS, indicates how many percentage left in receiving/sending multimedia messages////mms wm6.1- integrates SMS and MMS in one profile, does not show percentage/progress as to receiving and/or sending MMS)
4. added Task Manager
5. SMS threading Enabled
so far, thats what ive noticed...
ADVICE: since this is not a clean rom, and thus all of what imate want to add is pre-installed, just manage your Windows/Starup folder and remove unnecessary start files that consume PPC memory..add your favorite tools such as QuickMenu(to make x, and ok botton as CLOSE/END/Terminate) and Advance Config Tools for improvement on POWER, PERFORMACE, AND STABILITY...

is this ROM support SDHC?

sorry,can't download

Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?

RussianSpv said:
Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?
Click to expand...
Click to collapse
I'm in the same condition... any ideas??

RussianSpv said:
Imate.com web-site closed. Where are I can find ROM lock code?
I have not box with imei label and rom lock code.
How can update rom without this code?
Click to expand...
Click to collapse
cocodesigns said:
I'm in the same condition... any ideas??
Click to expand...
Click to collapse
hello,
there is no way to perform any ROM up/ downgrade with your I-mate device if you don't hand the Rom lockcode
The only thing you can do to solve this issue is to look back for the pre-owner of the device, ask for box or quick user guiding book
Good luck!
Đôngni

Can anyone point me in the direction of a download of the official WM6 or WM61 ROM for the iMate Ultimate 8150? With iMate having gone bust and the site shutdown it's a little difficult to get it through normal means

i just downloaded ROM but can't upgrade my 8150 because it keeps "trying to connect to device"... I already set up sync to windows mobile device center on vista. How can I solve the problem? tks

my imate ultimate 8150 gest stuck on the blue i mate logo screen...n cant be detected by activesync in both CB and SS modes....neeed heeeeeeeelp...please its been over six months scince it broke down
PLEASE I NEED UR HELP UrGENT!!!

no link!!!

I can donate for wm6.1 rom for 8150.

The download link is broken. Can you put up another one please? I'm still on Windows Mobile 6.0...

cocodesigns said:
I'm in the same condition... any ideas??
Click to expand...
Click to collapse
on my Box l of imate Ultimate 8105 the default password was 1234 which works for both factory resetting & reinstalling too will it be helpful to any one anyway? just guessing even on mediafire the file is no longger existing:crying: