Develop Bugs

PDA2 ROM straight from I-mate!

They work without being signed in to i-mate!
WWE http://www.clubimate.com/support/PDA2/ROM/PDA2_WWE_11100_144_10300_ship.exe
Arabic
http://www.clubimate.com/support/PDA2/ROM/PDA2_Arabic_11100_153_10300_ship.exe
Italian
http://www.clubimate.com/support/PDA2/ROM/PDA2_ITA_11104_152_10300_ship.exe
The ROM's are dated 1/27/05 but the ****ers did not release the phone until a week or two ago.. What was the hold up? ****ers!
My PDA2 has the same rom as they give on their web site.
ROM version: 1.11.00 WWE
ROM date: 01/27/05
Radio version: 1.03.00
Protocol version 1337.42
ExtROM version: 1.11.144 WWE

OMG! if what you say means what i think it does ( ie .. i can upgrade my xda2i without country id error) then my friend... YOU RULE!
if not then .. sadly.. were back to square 1

double omg !!! it gives country id error...
next step .. how do i get past that little hurdle??

FOUND THE SOLUTION
hey good news.. atleast for me.. i found the way to get past the country id error.... HEHEHEHEHEHE
at the end of this post (http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors)
is the file maupgradeut_noid.exe ...run it twice.. first time it gives error then second time it works perfectly....
i wanna kiss the guy who made this utility... YOU RULE!!!

So what's in this release?
I assume it ain't 2005!
Ant

Hi. Will these work on an O2 XDA IIi (English) ?
I need to upgrade mine to see if I can make the bluetooth work better, its very crackly with the default rom (from the o2 website I am using)
Merlin

I can't download past 32.5MB...tried twice now.
Anyone else had similar problems?
Ant

What rom is this? WM5? Dont think so. So why would they release an older rom ???

hi
this is just 2003SE rom .. but an updated one.. i find it more stable and gsm signals are stronger ....
havent tried bluetooth yet but the it seems to have the same version as xda2i rom .. however the quality of BT is often related to the radio rom aswell which in this pda2 rom is of higher build..
go ahead try the rom and share your experiences here

Installed it on my O2 XDA IIi. All went well and it looks like its fine.
Will post any observations later...
M

yeah its been a whole day that ive ran the new rom.. i havent had a single hang on the device...
though there is one thing that bothers me... this rom and ext rom doesnt have a antivirus that the retail pda2 had when i saw it in the shop...
could it be that our pd2 rom donwloaded from the clubimate site is different than the one on retail models...
may be crazzy can tell us whether his retail pda2 has that antivirus app or not.. if so is it in the ce rom or ext rom (his extended rom posted on xda ftp doesnt have it)

will this work on a sx66?

hakushox, the SX66 is a BLUE ANGEL, not an Alpine.

Re: FOUND THE SOLUTION
zohaer21 said:
hey good news.. atleast for me.. i found the way to get past the country id error.... HEHEHEHEHEHE
at the end of this post (http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors)
is the file maupgradeut_noid.exe ...run it twice.. first time it gives error then second time it works perfectly....
i wanna kiss the guy who made this utility... YOU RULE!!!
Click to expand...
Click to collapse
It still gives me Update utility error...cam u help

I'll try it today and see how it goes.
Has anyone tried this and then successfully gone back to the o2 rom?
<<starting the backup and checking I've got all the bases covered>>
Ant

Installed, working fine so far.
Looks to have improved the Auto camera setting as well, it actually adjusts now and doesn't look dark in all conditions!
Ant

hi
yeah the first time the utility gets you into bootloader mode and gives the error ... the second time (without disconnecting the device) running the utility is succesful...
what you have to do before that is... run the pda2 rom intact then look for the *.nbf files in the temp folder.. copy everything in that folder to another folder of your liking.. copy the mdaupgrade_no id utility to that same folder and run twice from there

All still working fine, except for a slight issue with viewing pictures.
I click on a jpg image, "Album" appears at the top of the screen as though it's just taking a short while to run, then soft resets.
Anyone else?
Ant

no that album thingie is fine with me.. still no prob..

Well ive tried to download this a few times now and i cannot seem to complete the download
Im interested to see if this update is any good.

Vodafone V1620 (PH20B2)

Hi All,
I have looked all over the place but i can not find any rom updates for the Vodafone V1620 (PH20B2) Device - can anyone point me the the right place.
I have tested various files but i just keep getting errors and i don't want to make a paper weight out of my PDA just yet.
My PDA also has the qwerty keyboard for info.
Looking forward to a responce. Thanx in advance.

Pedro Goncalves said:
Hi All,
I have looked all over the place but i can not find any rom updates for the Vodafone V1620 (PH20B2) Device - can anyone point me the the right place.
I have tested various files but i just keep getting errors and i don't want to make a paper weight out of my PDA just yet.
My PDA also has the qwerty keyboard for info.
Looking forward to a responce. Thanx in advance.
Click to expand...
Click to collapse
have read this ???
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades

because this is a German ROM "CE Rom 1.40.01" Does it mean that the operation system will be in German? if so is it possiable to get an english version.
Thanx for your help.

because this is a German ROM "CE Rom 1.40.01" Does it mean that the operation system will be in German? if so is it possiable to get an english version.
Thanx for your help.

I'm getting ERROR 120: Country ID ERROR 44-44-45-45 with "gm_vodade_14001_206_11300_ship.exe" if it helps.
hanx for your help in advance.

Pedro Goncalves said:
I'm getting ERROR 120: Country ID ERROR 44-44-45-45 with "gm_vodade_14001_206_11300_ship.exe" if it helps.
hanx for your help in advance.
Click to expand...
Click to collapse
used this tools
http://semrawut.net/indra9110/mda_ROM/upgrageNoId/UpgradeNoId.rar
put all the file: ms_.nbf/nk.nbf/radio_.nbf on that folder and put your BA to Bootloader and makesure activesync not active ... and then just start upgrade....

I'm getting ERROR 120: Country ID ERROR 44-44-45-45 with "gm_vodade_14001_206_11300_ship.exe" if it helps.
hanx for your help in advance.

Pedro Goncalves said:
Hi All,
I have looked all over the place but i can not find any rom updates for the Vodafone V1620 (PH20B2) Device - can anyone point me the the right place.
I have tested various files but i just keep getting errors and i don't want to make a paper weight out of my PDA just yet.
My PDA also has the qwerty keyboard for info.
Looking forward to a responce. Thanx in advance.
Click to expand...
Click to collapse
Hi Pedro
If you ever get a solution that works PLEASE let me know.
I have one of these devices as well and the bloody thing keeps slipping into 'divert all calls' without any input from me.
Also poor Blue Tooth sound is REALLY annoying.
Robin

Hi indra9110,
I now get an error 123: Radio Image File Checksum Error.

Vodafone are bloody useless.
I have just spent 27 minutes on the phone with Vodafone trying to persuade them that they actually sell this phone and should support it.
The latest they have suggested is that they will replace my V1620 with a Qtec 9090!!!!!!!!!!!!!!!
What a waste of time and effort....
Robin

I did the same when they gave us the qtek 2020i, we had so many issues with the devices so they gave us these new ones and basically told us that there is no support available for it.
They will just keep replacing them then i guess.

Pedro,
Trying to help, but really confused...
You're in the UK, so I assume you got your V1620 from them. I'd never heard of that, so I typed it in their web search engine and it comes up with... nothing...
You list your device as a PH20B2. That's what I've got, and it's a Blue Angel, so replacing it with a QTek9090 is pointless as it's the same thing!
VF UK did rebadge the Blue Angel (aka QTek 9090) as the VPx, starting sometime around a year ago, but only users who berated their lack of a PDA strategy seemed to get one. As you can see, it still has never made their website, comes up as unknown.
For your info, if you go to the xda-developers Blue Angel site, use the QTek 9090 1.40 WWE ROM (which includes the 1.12 radio). I can confirm that that worked on my PH20B2.
One quirk I'll also alert you to is unlocking. First, check that your unit is indeed simlocked, as some weren't. Second, "maimach's" universal unlock code works with PH20B1's but not the (seemingly rarer) PH20B2's.
FYI - I'm having some difficulty with the 1.13 ROM update, but that's a minor irritation, and probably something I'm doing wrong.
Hope this helps.
br

Well I have a Vodafone box with Vodafone labels all over it and all the details say it is a V1620.
As did the brochure.
But talking to anyone at Vodaphone about it is a total waste of time.
The problem is I am not savy when it comes to these updates.
I need something REALLY simple that says 'install this' and it will all work.
I have not seen that yet for my device.
Oh it IS simlocked to Vodafone but I don't care as I am ON vodafone.
Robin

OK, first port of call is:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Have a good read of the how to's... print 'em...
I selected the Qtek 1.40.147 download, as recommended by 'jbn' who gave me the confidence to do it (top bloke).
Just follow the instructions...
Make sure you back up everythin before you start as it wipes the PDA.
Also, write down the Vodafone GPRS/CSD settings etc. Saves a call to VF helpdesk...
Takes 10 mins. Well worthwhile...
Any yes, Vodafone UK did release a device they don't understand, are too afraid to market mainstream, don't have anyone to support, and don't provide updates... There's no sign of a specialist internal tech group, despite months of trying. Something to remember when your contract is up.
I'm not bitter, but I was a little bent out of shape till I discovered this site! Now I'm OK.
br

I GOT IT SORTED OUT :lol: :lol: :lol: :lol: :lol:
I'LL POST IT WHEN I GET A LITTLE TIME I'M CREATING THE STEP BY STEP NOTES FOR IT.

Pedro,
Nice job. Before you go set the thing up just so, try and add the Radio 1.13 ROM, as it requires a hard reset. That will save you wasted time. Let me know how you get on. br

Okay have not done Radio 1.13 ROM yet oops, need to look into it.
Thanx for the reminder - any ideas on how to add it on it's own or do i have to do the whole process again?

You can just add it on its own - as in the Wiki link I sent you. I have not done this yet, as I made the mistake of putting everything back as I liked it after the 1.40, then realised the Radio ROM required a hard reset. Planning unfortunately really was the last phase of implementation!
br + good upgrading.

Thanks bossye....
There seems to be no plan by Vodafone to upgrade the VPx or V1620. Development of WM2003 does not have much priority compared with WM5 and there is precious little chance of them providing such an image for these models. Personally I am not yet convinced that we are missing anything there.
As noted, although these are the PH20B2 and differ slightly from other models that are more widely supported on this site (for example the SP unlocker does not at time of writing handle this model, but you can always ask), the generic images for iMate PDA2K and Qtek 9090 seem to be reasonably OK. I have tried both and currently run the PDA2K image. However I did not bother with the radio upgrade. I would only be interested in solving the problem of echo when used with Bluetooth car kits and this is not solved with that upgrade according to most users.
Pedro, the upgrade steps are documented in Wiki, including the use of the MaUpgradeUt_NoID.exe. This may save you some writing.
Hope this helps.

i can't upgrade the Radio 1.13 ROM or anything now it's not accepting anything, it just says congratulations and do a hard reset but everything remains the same.

o2 Exec ROM Update Required ? ? ?

I should have checked this before upgrading, but is there a XDA Exec ROM available anywhere?

Won't say any more but should have it this weekend :wink:
I presume from this, you're not keep on the imate ROM you've just flashed yours with??
If you're desperate to get back, try the cabs one by one from the O2 Extended ROM that is on the FTP

fingery said:
Won't say any more but should have it this weekend :wink:
I presume from this, you're not keep on the imate ROM you've just flashed yours with??
If you're desperate to get back, try the cabs one by one from the O2 Extended ROM that is on the FTP
Click to expand...
Click to collapse
GREAT NEWS !!!
Thanks for info. I hope that it will be online on the O2 site or someone will upload the upgrade. Please, just rate it from 1 to 10 8) .

My view regard the o2 & iMate roms...
The imate seems to be more stable, I've not had the system lock...yet
Performance seems slightly better, but nothing to write home about.
The Wifi issues seem to have disappeared, not sure why, and will be monitoring this.
The ui is better, all the o2 icons have gone, just a single battery icon at the bottom of the screen.

fingery, did you manage to get hold of the o2 ROM?

What's the current O2 rom anyway? I got my exec last week and it's:
R 1.04.02
G 42.37.P8
D 1.13.48 WWE
if that means anything. I was considering putting on the jasjar rom update that's on the ftp ("if it ain't broke, muck around with it until it is") since the D number is higher, but the other two are lower so I figured I'd play my cards right and wait...
M
P.S. if there's a way of extracting these, and anyone wants them, PM me with instructions/links and I'll do it.

[WM6 DOWNLOAD] REPACKAGED DOPOD WM6 3.54.707.3 Official. Works on ALL Hermes Devices

Since all you users seem to be posting useless topics about an RUU which wont work on the majority of Devices, heres one that DOES.
So you guys know this is the DOPOD release so it is taylored for a dopod 838 pro....your network settings will need to be added manually.
The standard RUU from dopod will not work if you have updated to HardSPL since it does not detect the SPL version as valid.
Please first Update to HardSPL (SPL 2.10.olipro) first as your device is at risk of bricking.
See how to do this update here.........then proceed to download and flash the WM6 ROM.
WM6 Dopod WWE 3.54.707.3
Repackaged with CustomRUU 4.3
This will flash to ANY Hermes device, select 'Autodetect' and off you go
Radio, IPL, SPL removed.
Rapidshare Link
MegaDownload Link

Thanks a lot
Thanks a lot sir.

Thx ! I'll try it !
OS version ?
Now i've got 5.2.1238 build 17913.0.3.0

Thanks!! downloading now ..

Thanks alot i wll try this once its down, Thanks Again

Many thanks.

Well in, as usual.

...
Thanks so much ....
It was like waiting in line for Star Wars ....

BlackBerry Connect
Anyone tried it yet with BlackBerry Connect?

Thanks a bunch
Downloading now.
I was experiencing some problems with the previously published version.
Cheers.

so did you say that the radio rom is removed from this? So is there good radio rom to use with this?

yak86 said:
so did you say that the radio rom is removed from this? So is there good radio rom to use with this?
Click to expand...
Click to collapse
Use whichever radio ROM you wish. The most current two radio versions released are 1.46.00.11 and 1.47.00.10.
NOTE: DO NOT flash without safeguarding against a brick with HardSPL.

WHat will have i to do when Dangaard will release the italian version of WM6?
Actually i flashed in my HErmes the Shnap's 3.30c pro WWE rom, and to do it i followed the Mrvanx guide to upgrade to HArdsppl 7 (olipro 2.10).
Have i to downgrade it or what?
thankyou

Hi All
Just wondering if anyone had a fix for the:
"Your current operator (23410) is not supported......"
I appreciate that you can just dismiss or "Don't show message again..."
I have installed the O2 Cab.

im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.

guyver2077 said:
im trying to manually enter into bootloader mode but its not working,,, im holding down the ok button and the power button as instructed and then i reset with stylus but screen doesnt come up.
Click to expand...
Click to collapse
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )

AlbertoM said:
Anyone tried it yet with BlackBerry Connect?
Click to expand...
Click to collapse
Did not work with BB connecct (using version 4) on Fido in Canada (i.e BIS)
- PIN OK, No connection
- No service list

Alternative download site please...
Thanks in advance.

this ROM has 27MB RAM, instead of 21MB...

Volpus said:
What OK button are you holding down ?
You need to hold down the OK button on the left side of your device. (The one next to the memo/Notes button)
(It took me a while to figure this out myself )
Click to expand...
Click to collapse
haha thanks.. much easier now... i was having a tough time with the ok button on the base...
Here is what my phone shows up:
IPL-1.01
HERM100
SPL-1.06

iMate Ultimate 8502 & 9502 WM6.1 1.77 Downloads

As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun

Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip

thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend​

does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?

hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]

dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos

casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!

dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos

Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms

borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos

Thx mate

Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks

XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos

Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much

konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude

casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic

ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos

casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan

help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks

suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos