The new and improved hard-spl for our trinities, thanks to a little glitch in hard-spl's protecting itself against the new spl from HTC we have this new addition Olipro finished for us today. This is based on 1.05 MFG so we now have lnb capability and the rtasks. In addition of course, this SPL really should protect itself against being reflashed...
Donations to Olipro, I am only posting it...
EDIT: Should be working now!
Great as always!
Thanks for both Shadowmite and Olipro to offer us such nich piece.
It saves a lot of us from heartattack of flash problem...
great!! thanks to Olipro!
Great so quick
Thank you so much.
great works
thanks
Thanks for posting shadowmite... I couldn't sleep anyway so I might as well have sorted it myself, but never mind.
tomorrow I'll relocate it to the empirical thread
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Upgrade from P3600
Hi,
Can I upgrade with this tool my P3600 with original WM5 GPS activated Dutch version to WM6?
Or do I need to take other steps?
And, what's the best official WM6 rom to use for European P3600 ?
Thx,
Kopernikus
xtraart said:
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Click to expand...
Click to collapse
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Thanks for the hard work.
Olipro said:
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Click to expand...
Click to collapse
I run mtty with "task 32" and it return
task 32
Command error !!!
Cmd>task 32
Level = FF
Cmd>
and the version displays on my device is
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro
Does this mean we don't have to worry about the SPL getting overwritten? We can just flash whatever rom without any precautions?
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
HeartMan said:
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
Click to expand...
Click to collapse
I have this problem and spent almost an hour trying. You will need to find an OS only ROM(Eg. http://forum.xda-developers.com/showthread.php?t=312499) and it will flash successfully. Then you boot the PDA OS up and flash any suitable ROM.
I've removed the link for now, this is a bug in his patch and he's looking at it now. In the meantime you need to flash via SSPL or reflash the older hard-spl...
New Hard-SPL from Oli
Hello
Could you give us any news about new Hard-SPL?
When can we expect it?
Robidog
banzro said:
Hello
When can we expect it?
Robidog
Click to expand...
Click to collapse
my guess is....when its ready
I'm still waiting.
thanks to Olipro
I am waiting...
Related
Hi
Below is my bootloader info:
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30lipro
Currently using WM5 Dopod Chi rom
When I want to upgrade to WM6 CHi rom, it freezes at 27% and report error 262.
Please advise what I should do to solve it. Thanks much!!!
dogmood said:
Hi
Below is my bootloader info:
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30lipro
Currently using WM5 Dopod Chi rom
When I want to upgrade to WM6 CHi rom, it freezes at 27% and report error 262.
Please advise what I should do to solve it. Thanks much!!!
Click to expand...
Click to collapse
Hello,use for upgrade memory card,it's ok.
maury
is it official ROM for your carrier?
if it is, can try without manually entering bootloader..
dogmood said:
Hi
Below is my bootloader info:
Trin100
IPL-0.50
Trin100 MFG
SPL-1.30lipro
Currently using WM5 Dopod Chi rom
When I want to upgrade to WM6 CHi rom, it freezes at 27% and report error 262.
Please advise what I should do to solve it. Thanks much!!!
Click to expand...
Click to collapse
Which rom you have downloaded? Link please?
D810_HK_WM6_Upgrade_20070709
Yes it is official but i cannot make it by just clicking the exe file...
Both wm5 and wm6 are official dopod...
Problem solved. I have spent two days on it and I would like to share my ultimate method...
http://forum.xda-developers.com/showthread.php?t=293632
I need to use SSPL-Trin to lead the device into bootloader mode
Then use SD card method to update
Hope it is referential to future user.
maury71 said:
Hello,use for upgrade memory card,it's ok.
maury
Click to expand...
Click to collapse
Problem solved. I have spent two days on it and I would like to share my ultimate method...
http://forum.xda-developers.com/showthread.php?t=293632
I need to use SSPL-Trin to lead the device into bootloader mode
Then use SD card method to update
Hope it is referential to future user.
Today 12:11 PM
...thanks to maury71....or not??????? i said yes.....
Sure. thanks much for murray...!!!
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
You must back to return
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
Dear friend,
I know schaps have a fout make by these rom. You must old rom update on your hermes. You must power and sound button pressed than hard reset doen than you if you see a colored screen than can you old version rom update. Sample: Schap'4.31
regards,
Bahadir
thanks for the quick respond
tshtsh said:
I have upgraded to Schap's WM6.1 Pro 4.40 Beta ROM
and revived this message on start up: This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers. To obtain a newer release or further info, please revisit the web site that you used to obtain your current beta release.
That's it. Can't do anything can't eles help.................................
Click to expand...
Click to collapse
What should you do:
1) READ THE ENTIRE THREAD OF THE ROM BEFORE FLASHING (IF THERE IS BETA SIGN!!!!
2) you can either keep it - it will work if you take off the SIM card and Hard reset the device, then turn off automatic time update from network AND do not try to synchronize the device via AS (taht way the device will know the correct time and block itself again)
3) Flash any other ROM - you do not need Active sync to be working to flah a ROM, just put your device into Bootloader, plug the usb cable and if the bootloader says USB you can flash whatever ROM you want. If you want WM6.1 you can use PDA viet ROM (works without time bomb, but it is not very stable).
The PDA Viet WM6.1 works great after setting PagePool to 6mb instead of the default 4mb. Before doing that, it was extremely buggy and unstable.
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
juliengourou311 said:
Hi all, i'm sorry i'm french and i don't speak english.
I updated yesterday my tytn and i have yet the same problem.
I have this message and i' can't synchronized my phone with my pc since i uptdated it.
I don't know what to do?
PLease help me.
Thanks
julien
Click to expand...
Click to collapse
Read post #2
TechBill said:
Read post #2
Click to expand...
Click to collapse
Excuse me, i read it but i don"t understand wery well.
I have to take a hard reset , with pressing the power button, but what is the sound button ?
it is the weel on the left side ?
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
juliengourou311 said:
i have the screen with color but during the update i have the error27O "the image file is corrupt..."
Click to expand...
Click to collapse
It telling you what it says .. Image file is corrupt so try a different ROM, like a factory rom for your device.
And did you read the wiki recommending to flashed Hard-SPL on your Hermes before flashing any radio or ROM?
yes i read any.
But i suppose there are problem because i have the same problem with diffrents roms... I 'm trying to resolve the problem...
after few pourcents, it restart and tell this messages
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
juliengourou311 said:
I tried 6 or 7 roms and 1 official, no way to install.
All rom tell me at 1% that the image rom is corrupt. Before it worked but since the WM6 , no way.
The official rom tell me at 1% that the vender id is invalid...
I don't know what doing...
Click to expand...
Click to collapse
Well did you flash Hard-SPL on it first before flashing any ROM?
You might have to try flashing from SD card now since you can't flash it via usb. It explained in the wiki.
.
hey all I am new here and i will be pretty happy if you guys can help me solve the problem i've got with HTC P3300 (artemis)
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
please help me thnx
Darren.
Did you cid unlock?
What is your SPL?
read this: http://forum.xda-developers.com/showthread.php?t=308242
Cheers
Im pretty sure it is unlocked because I did install the USPl by poof and i did try to install the original files but it still giving me errors ! What can I do we talk about 1 month phone !!! please help me SOS
Why would you want to downgrade to WM5? WM5 was a pain in my arse. so many problems I could have smashed my phone with a hammer (estwing of course) a thousand times. Have you tried to upgrade instead? a new batch of diamond roms is looking like an awsome possibility at the moment. Aside from that, are you using vista or xp?
I get the same problem: after 2% the ROM Updater (at my point this one: "HTC_1.12.405.01_026790_WWE_SHIP") says: 244 Invalid Model ID.
Also, I previous installed USPL (again) via the Artemis_USPL.
I did an update to the "Artemis Touch 4.02 Full with 4 sided cube" ROM before, so if there would be a problem with that?..
For me all the WM6-based ROMs are too slow for an 200Mhz-Phone, e.g. my Phone needs like 10 seconds to load the contacts (no other software is running at the same time..). So its getting a little on my nervs..
I tried to find a WM 2003SE ROM for the Artemis, but there is no such Version.
Any suggestions?!
edit: I am from Germany, so is this "HTC_1.12.405.01_026790_WWE_SHIP" ROM not compatible with a german HTC Artemis?
hm, if i remember correctly this is all about the different bootloader versions...
could it be downgrade (in bootloaders) is not possible..???
we had some of this here:
http://forum.xda-developers.com/showthread.php?t=282195
then again check with the versions here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
maybe this works ( though its french):
http://forum.xda-developers.com/showpost.php?p=1520661&postcount=13
and:you must use uspl before you try another rom, it might have been altered by another rom!!!
but seriously no wm5 is faster then yue extraclean!!! or comparable
greetz
another idea:
take out your sd card when trying to flash,
alternatively try sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
thormdac said:
but seriously no wm5 is faster then yue extraclean!!! or comparable
Click to expand...
Click to collapse
how faster is it than a normal wm5 rom? are there any pictures to see how it looks like?
dor515,listen to the guys wm5 sucks,really...and for those 200mhz...try overclocking with batterystatus...you can get 247mhz all the time (which is preferred) and if you want you can set up to 300 (at your own risk)
Hi all,
i just tried an ROM update on my diamond and ended up with a probably burned diamond.
I tried to updated to "Unsigned-Hard-SPL-Diamond-OliNex" and then to Elite 2.0.
First the Hard-SPL updated didn't work an stoped at 1%.
As i figgured out i had to start the update tool as administrator under my Windows Vista.
The diamond now starts and shows the following screen:
1. A Water like Picture
2. The Text "Xda diamond" in the bottom left corner
3. The Text (in red characters)
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
4. The Character "H" (in red) next to the "Xda diamond" Text
The Diamond stops here and does nothing.
I can get to the three colors screen by pressing Vol Down and Reset.
I also tried a hard reset which worked, but i ended up at the same screen and the diamond does nothing and just stops there.
Have i completely damaged my Diamond? (I hope not, would be a nightmare to me)
I will be very grateful for any kind of help on this!
Thanks in advance!
Did u have Flash Hard SPL before?
When u didnt, the Update stops @1% whit err msg like: Wrong vendor ID
Then u have to flash hard SPL before, is sticky in this Forum.
Try maybe with a ROM from here in the first Sticky post, then u can ask for support.
hope helped u
mastah
when you get the "three colour screen" then everything
should be ok, try to reflash the device!
Hi thanks for the quick answer!
I tried now to flash again to the Hard-SPL 1.30... but i get an Error 284 at 0%.
The three color screen shows the following:
DIAM300 MFG 64M
SPL-1.40.LiMex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVI v0x30
Any ideas?
Any help welcome!
I am getting a wrack, my nerves are going crazy. I hope i can recover at least to some ROM now...
Flash hard-spl, set ur device in bootloader mode (tri-color screen. Search for it if u doesent know how)
And flash one of the compatible Roms, they are sticky in the forum.
Maybe urs spl isnt compatible whit the Rom u flashed.
When the Device boot's, and u see the red signs whit numbers, then i think its all ok...
...only incomplete rom.
greets, and good luck
http://forum.xda-developers.com/showthread.php?t=400411
CURRENT ROMS:
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_Europe_1.37.401.3_Radio_Signed_Dia mond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_NOR_1.37.409.3_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
DIAM1.37.413.3SVE (REBUILT)
COOKED ROMS:
ALL BEPE ROMS ARE SIGNED AND ARE PART OF THE ELITE TEAM ROMs DIVISION, SEE INDIVIDUAL THREADS.
Elite 2.0
PDAVIET DIAMOND_1.37.08.01
tlr-diamond-1.08.06.20
tlr-diamond-2.08.07.01
DIAM.DAN.137.403.3-Cyphol
DIAM140 (EDGE Only Diamond):
indian_ship_rom
http://forum.xda-developers.com/showthread.php?t=400402
Hard-SPL or how I learned to stop worrying and love the MPU
If this not work try with spl dev-edition:
http://forum.xda-developers.com/showthread.php?t=400950
thanks for the suggestions.
i will try what you said and see what i can get.
thanks really much for your help this forum is amazing!
hope i can finally live again with my diamon which i already like so much...
thanks again!
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
thanks mashta,
i will try it on vista 32 first, since i do not have xp here
thanks again for all the help!
On Vista 64, I had to take the following steps to have it working:
Fisrt: connect the device in boot mode to the PC
Second: wait until Vista installs a driver update
Third: disconnect the device and restart the PC after the update is installed
Forth: right-click on the RUU executable, and choose
compatibility mode with Win XP SP2
Fifth: run the RUU, cross your fingers and start praying
As how to enter bootloader, press volume down and reset simultaneously
s1rl4ncel0t
Senior Member
mastah said:
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
Click to expand...
Click to collapse
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
It worked out of the box, without any special drivers installed whatsoever. I believe there were some drivers installed when I got it into bootloader mode, but aside from WMDC I didn't install any extra software
Milenco said:
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
Click to expand...
Click to collapse
Lucky boy, but many peoples has probs whit vista
and maybe it helps to try on a other os to find
whats the bug
and helpfull site:
http://www.modmydiamond.info/
sounds like a bad flash? i once had the same problem with HTC tytn2, and i managed to contact forumer GSLeon who helped me out. he said "after a bad flash,u should never keep attempting to flash again, because u may permanently brick your phone"
THANK GOOD IT WORKS AGIN!
And now the asnwer what was the problem:
A ****ing USB-HUB from MSI!
I had my diamond connected throu that USB hub and so everytime i tried to flash i had communication errors at 0% or 1%.
I connected the diamon directly to my pc and guess what:
It worked like a charm.
THANKS AGAIN TO ALL THE HELP FROM PEOPLE HERE!
This forum is realy amazing.
Thanks again very very much!
I am so happy to have my diamon back
And i will never buy a MSI USB HUB again...
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Blob8me said:
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Click to expand...
Click to collapse
Releived is not the right word, back to life fits more
Thanks again for all the help i have got here!
davidl said:
And i will never buy a MSI USB HUB again...
Click to expand...
Click to collapse
Just so that in a few weeks time when someone else searches and finds this thread.........
NEVER US ANY KIND OF HUB TO FLASH A PHONE, ALWAYS PLUG THE PHONE DIRECTLY INTO YOUR MOTHERBOARDS USB SOCKET
Oh and davidl you are one lucky son of a *****
people could read a bit more before trying to help - the guy obviously had the hardspl flashed because of the version that was reported in tricolour. (1.40.etc...though it was mistyped )
anyway good that it got resolved OK. using hubs is indeed not recommended.
welcome to the darkside of the diamond
hi guys
i'm just beginnin' and talkin' to you from my diamond an' my ****in' orange french default rom the 1.73.73.2
so for those who know that it was made by sons of *****es for their bros,
i was going crazy to about this problem but you guys are really marvelous an' think know that i have the answer to my problem.
but i'm a new bee as you can see and i'd like to know if i have to install anyway hard spl?
i just want to delete this ****in' rom...
excuz me for my english and one million thanks for that precious help
3 ... 2 ... 1... Ooooh he got banned!
I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Are you using Vista? If yes, then try downloading in a computer with Windows XP?
gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0
Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.