Develop Bugs

Hard-SPL 1.30 MFG - Oli

The new and improved hard-spl for our trinities, thanks to a little glitch in hard-spl's protecting itself against the new spl from HTC we have this new addition Olipro finished for us today. This is based on 1.05 MFG so we now have lnb capability and the rtasks. In addition of course, this SPL really should protect itself against being reflashed...
Donations to Olipro, I am only posting it...
EDIT: Should be working now!

Great as always!

Thanks for both Shadowmite and Olipro to offer us such nich piece.
It saves a lot of us from heartattack of flash problem...

great!! thanks to Olipro!

Great so quick
Thank you so much.

great works
thanks

Thanks for posting shadowmite... I couldn't sleep anyway so I might as well have sorted it myself, but never mind.
tomorrow I'll relocate it to the empirical thread

I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID

Upgrade from P3600
Hi,
Can I upgrade with this tool my P3600 with original WM5 GPS activated Dutch version to WM6?
Or do I need to take other steps?
And, what's the best official WM6 rom to use for European P3600 ?
Thx,
Kopernikus

xtraart said:
I'm flash hard spl1.30 and i cann't upgrade to official rom wm6 there is
ERROR[294]:INVALID VENDER ID
Click to expand...
Click to collapse
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device

Thanks for the hard work.

Olipro said:
enter the bootloader and run mtty on your computer and do "task 32" - tell me what that returns.
also, tell me what version displays on the device
Click to expand...
Click to collapse
I run mtty with "task 32" and it return
task 32
Command error !!!
Cmd>task 32
Level = FF
Cmd>
and the version displays on my device is
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro

Does this mean we don't have to worry about the SPL getting overwritten? We can just flash whatever rom without any precautions?

am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do

HeartMan said:
am stuck in bootloader spl 1.30oli, am trying to install my original rom it give me device id error, modified also same problem and when i remove the battrey also same problem what can i do
Click to expand...
Click to collapse
I have this problem and spent almost an hour trying. You will need to find an OS only ROM(Eg. http://forum.xda-developers.com/showthread.php?t=312499) and it will flash successfully. Then you boot the PDA OS up and flash any suitable ROM.

I've removed the link for now, this is a bug in his patch and he's looking at it now. In the meantime you need to flash via SSPL or reflash the older hard-spl...

New Hard-SPL from Oli
Hello
Could you give us any news about new Hard-SPL?
When can we expect it?
Robidog

banzro said:
Hello
When can we expect it?
Robidog
Click to expand...
Click to collapse
my guess is....when its ready

I'm still waiting.

thanks to Olipro
I am waiting...

Trying To Upgrade - DOESN'T EVEN TRI-COLOR? *SIGH*

Edit: I'm an idiot
Used the wrong ROM - DuTTY's new DualTouch v1.1 ftw!

digitalninjas said:
Hey thar,
Sorry to be a newb however this is really pissing me off.
I upgraded my HTC TyTN II a few times before FLAWLESSLY but now after doing one of DuTTYs ROM's I can't even upgrade my device anymore!
I'll connect my device to my computer via USB (& ActiveSync 4.5) wait for it to be connected - then boot up the new ROM app. It will take me through the steps and when it's supposed to throw the phone in tri-color and flash - it will just restart the stupid phone and give me a bull**** 260 error code (No Connection).
Any ideas? I followed the MicroSD tut but it won't boot that screen either.
I need to upgrade from this ROM, it's slow and buggy!
Click to expand...
Click to collapse
Where did you download the ROM from (the dutty ROM)??

From this website

This is the tytn forum not the tytn2.
Which device have you got?

Johnston411 said:
This is the tytn forum not the tytn2.
Which device have you got?
Click to expand...
Click to collapse
This is the section for hermes with Windows Mobile 6, something that the TyTn II comes with natively...
I have the TyTN II.

Tytn2 = Kaiser
Go here. You have a kaiser if it's a tytn2.
http://forum.xda-developers.com/forumdisplay.php?f=376
Plenty to read before you flash.
Have you Hard spl'd your kaiser yet?

Johnston411 said:
Go here. You have a kaiser if it's a tytn2.
http://forum.xda-developers.com/forumdisplay.php?f=376
Plenty to read before you flash.
Have you Hard spl'd your kaiser yet?
Click to expand...
Click to collapse
Yes, I was flash-happy and was trying out many new ROM's, however one day it decided to just not work and not even tri-color.

if you manually put your device in bootloader then attach it to your pc the screen should say serial then usb.
once it says usb and the pc has installed any drivers it may need run the upgrade and it should work (if not first time try again)
I think to get bootloader manually hold down off button and camera and then reset with stylus continuing to hold buttons

digitalninjas said:
Yes, I was flash-happy and was trying out many new ROM's, however one day it decided to just not work and not even tri-color.
Click to expand...
Click to collapse
Sounds like you have attempted to flash a Hermes ROM to your device.....best NOT to be flash happy as something like this would happen if you are not carefull.
Your device is a Kaiser so you need to go into the Kaiser forum NOT the Hermes forum. WM6 is released for MANY HTC devices eg: Wizard, Hermes, Kaiser, Athena, Titan, Artemis etc...

and just to reiterate make sure its a kaiser rom and not one of duttys for a different device or you could brick your device

peer guardian 2???????

mrvanx said:
Sounds like you have attempted to flash a Hermes ROM to your device.....best NOT to be flash happy as something like this would happen if you are not carefull.
Your device is a Kaiser so you need to go into the Kaiser forum NOT the Hermes forum. WM6 is released for MANY HTC devices eg: Wizard, Hermes, Kaiser, Athena, Titan, Artemis etc...
Click to expand...
Click to collapse
Oh snap! I got owned - lol. I'll keep trying to flash it

I fixed it, sorry for the e-thugging
<3
just booted up his new DualTouch ROM and bam, tri-colored first thing
I'm an idiot!

Imate Jamin Wont Flash

Hi Guys,
Im a newbie when it comes to flashing Roms. I have tried flashing Jamin by several methods with no success, keep getting error 260 code, communication error.
I posted this in Post one in Jesterz thread (post #143 pg 15) http://forum.xda-developers.com/showthread.php?t=284578 and on http://forum.xda-developers.com/showthread.php?t=413124
Can anybody give me any advice as i really want to try some of the Roms here but im having problems. When imate realeased their updated Rom a year or so ago, this installed with no problems??
methods tried so far seperately resetting each time, with no success (same error problem):
Prophet_PDAViet Temp
upgrade HardSP G3
Romupdate NV G3
Jester r1 G3 - RUU
Prophet G3 IPL V2.20
Direct 5 to 6.1 tool
WM6 smart1 v1.3
Imate Jamin
ILP 1.00
SPL 2.13.000
OS 2.13.9.23
GSM 02.20.21
Obtained from bootloader.
ANy ideas/suggestions would be great an thanks in advance.
btw i have searched forums in great depth and most people have success, so i am confused as to why i cannot get rom to flash?

Try to change the USB port! My Ultimate 6150 allowed to be flashed being conected only to one port! The other three ports lead to an comm error. Hope to help you!
Good luck!

Part flashed now try to get wm6
quetzalquatl said:
Try to change the USB port! My Ultimate 6150 allowed to be flashed being conected only to one port! The other three ports lead to an comm error. Hope to help you!
Good luck!
Click to expand...
Click to collapse
Hey, Thanks for that! I had tried 3 of 4 of my usb ports, all failed but the one i hadnt tried.
Ok now for next problem
Now running Jesterz AKU 2.2 which flashed fine.
AKU2.2 IPL 2.20 SPL 2.20.0000
I now try to flash to wm6, i have tried cyrstal V3, direct 5 to 6 tool and lazy tools. i have done hard spl just in case which goes on very quickly no problem.
From what i read i should be able to go straight to 6 now?
I keep getting error 240 mostly and occasionally 274?
I have reset device and laptop and tried all usb ports!
Sorry to be a pain but i am half way there now and desp want to flash to wm6.

SUCCESS NOW Wm6
Just to say thanks to everyone who helped with their infinate wisdom,
i finally flashed to wm6 Crystal V3 and now have the confidence to try other OS!
Words to newbies, do your research, then try and if you fail, ask and try try again, its sooooo worth it!
My Jamin has never run so well!!!

iMate Ultimate 8502 & 9502 WM6.1 1.77 Downloads

As requested by you!
8502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zipp
9502 WWE 6.1 1.77 Official
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
If you're having any problems with the links, let me know.
I'm not responsible if these ROM's brick your phone, they are the official downloads off the iMate website, they're unmodified.
Anyways, have fun

Mirrors here:
http://rapidshare.com/files/186622637/Ultimate_9502_WWE_WM6.1.zip
http://rapidshare.com/files/186625883/Ultimate_8502_WWE_WM6.1.zip

thank you very much for this useful program
I am looking for the same file but arabic I mean I went Ultimate 9502 Arabic WM6.1
if you have it
my friend​

does anyone know if there will be another official rom version for WM6.5 for Imate 8502?
or did anyone tried 8502 with another rom upgrade other than 6.1?

hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]

dongni filth said:
hey my friends,
This problem causes me headache:
I bought an old Ultimate 9502, right now the Jog dial is dead, and the flash led of camera also goes wrong, it doesn't make any action!
I want to update again the WM 6.1 for this device to see if the Jog Dial and Flash go well again or not!
As the old device so i don't have any account and cannot log in the www.imate.com, can't upgrade it online!
what i have now are ActiveSync 4.5 and V1.77 WM 6.1 Rom for it!
pls advice me how to update from my own PC? How to do? what more i need?
Thank you
[email protected]
[email protected]
Click to expand...
Click to collapse
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos

casouzaj said:
You see, sometimes, with this ROM, some of my hardware buttons (including the D-pad) refuse to work. But, whenever it happens, a simple soft reset sorts it out. I suppose you already tried that, right?
The next step, prior to reflashing, would be to perform a hard reset. By doing a hard reset, you'll lose all your data, and the device will return to its factory defaults. If you don't want to loose your data and settings, back them up beforehand, to be restored afterwards. I know of two full backup applications: SpriteBackup (the one I use), and SpbBackup. Besides, there is a very useful (and free) application which backs all your PIM up: PPCPimBackUp. Just search for it here at xda-developers.
To perform it by software means, tap on Start > Settings > System tab > Master Clear. It can be done by a combination of hardware keys too: press and hold both the blue Fn and the green Call buttons, and, at the same time, press the reset pin with the stylus pen (some people here replace the reset pin by pressing the Power button at the same time as the other keys, and it seems to work). A white screen will come up asking for confirmation.
If you still happen to have problems after performing a hard reset, then try to reflash. One of the steps of the flashing process will require you to enter the ROM lock code. If you bought your device with its original box, the ROM lock code is printed on a stick in it. Otherwise, you'd have to contact i-mate's support. The links on the 1st post seem to be dead, but the mirror ones on the 2nd post are still working. Just download the zip file which has '9502' in its name, unpack it to anyware you want on your PC, connect your device to it through the USB cable, and make sure ActiveSync is running. Then, double-click on the unpacked EUM SFX exectutable file and follow the steps.
Good luck!
Carlos
Click to expand...
Click to collapse
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!

dongni filth said:
Dear Carlos,
Really appreciated for your kind guiding!
As what you guided, i am on the way to follow it, and some more stupid questions need to through more:
1. I am having SpriteBackup v6.0.2 Build 2065, is this the lasted ver up to now? And does it back up all PM registered as before?
2. What is Reflashing? of course i have Rom lockcode now
3. Run ActiveSync 4.5 from PC and also activate Sync function on 9502, right?
Thank you and best regards, waiting for you reply soon too!
Click to expand...
Click to collapse
1. Mine was 6.2.2 Build 2280. It was newer than yours, but, from your question, I've just gone to www.spritemobile.com and found version 6.5.4.16 there. I'm presently installing it,
2. Reflashing is the process of updating the ROM on your device. For all recent i-mate devices, the EUM SFX application running on your PC will require the ROM lock code to procceed.
3. You must have ActiveSync installed on your PC. Its mobile version will automatically run on your device when you connect it to your PC. They will comunicate with each other in order to synchronize your PIM, media and other files you'll specify the first time they are connected.
Cheers!
Carlos

Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms

borce_razor said:
Who can download this 2 roms ? ita and arabic
https://www.imate.com/Support_DeviceSupport.aspx?key=18bfc33f-3cfd-4abc-8fda-1ec0bd9ae6a5&cmd=roms
Click to expand...
Click to collapse
The arabic WM6.1 ROM is here, and the italian WM6.0 one, here.
Enjoy!
Carlos

Thx mate

Imate 9502 Official ROM (Winmo 6.1 English)
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks

XboeD said:
Dear all,
I just bought Imate 9502 (second hand/used phone).
I can't log in to Imate website, maybe the Imei number had been registered by previous owner..
Can anyone upload that ROM for me?
Thanks
Click to expand...
Click to collapse
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos

Dont know if this is right place to post:$
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much

konvikted said:
hey guy..please don't get angry i just hacked my wizard yesterday so i really don't understand much about all this imate hacking
my question is.. can imate ultimate 8502 be hacked ?
like i installed cracing's rom in my wizard soo is it possinle that there is a different roam for imate ultimate 8502
if its there can you please provide me with the link?
thankyou so much
Click to expand...
Click to collapse
so difficult to answer you question! you said alread hacked it, now you want to know if it can be hacked?!
If the 8502 is internation version, so no need to hack anything, just up the newest WM6.1 for it! Done!
good luck dude

casouzaj said:
You can find the English v01.77 WM6.1 ROM mirrored here, the Arabic one (with the same build and version) here, and the Italian v01.42 WM6.0 one here.
Hope one of them can fit your new device...
Enjoy!
Carlos
Click to expand...
Click to collapse
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic

ecronic said:
Hey there,
Just a quick question. I've been looking for the WM6.0 English since quite sometime now but no luck.
Could you guide me where I could find the WM6.0 for 9502? If there is a custom version also I don't mind trying it.
Also would like to know if there is a WM6.5 version released for imate Ultimate 9502?
Thanks.
Ecronic
Click to expand...
Click to collapse
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos

casouzaj said:
The stock WM6.0 ROM was really buggy. No wonder why i-mate hasn't made it available at their website. However, if you really plan to downgrade your device, I don't see other option than learning italian beforehand.
Regarding WM6.5, I'd like to flash it too, but, unfortunately, I don't know any cooked WM6.5 buids for our devices.
Sorry for not being able to help you any further...
Cheers!
Carlos
Click to expand...
Click to collapse
re 6.5 cooked roms, are there any utils around for these devices? if so i might try and cook one or assist if anyone has already made a start?
dan

help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks

suris said:
help me.
what's the key combination to do hard reset 'i-mate 8502.
thanks
Click to expand...
Click to collapse
In theory, you should press and hold 3 keys: the blue Fn, the green Send, and the Power buttons at the same time. When you release them, a white screen should come up asking for confirmation. You should confirm with the left softkey.
Nevertheless, the last time I tried it didn't work for me as such. I had to replace the Power button by the reset pin, i.e. it worked only when I pressed and held both the blue Fn and the green Send buttons, and, at the same time, I pressed the reset pin with the stylus pen. At the moment I released the buttons, the screen confirmation came up.
Good luck!
Carlos

Qtek 9000 dead

I was trying to upgrade my Qtek 9000 but something goes wrong and now I can't start my Qtek, it shows just USB on up of the screen when I connect it to USB and down shows it v2.01 , when I unplugg it, it shows up Serial and down v2.01
Can you write me - what application I shall use to get my Qtek working?
I think I need complet flash ROM and erease all in my phone and then copy all again. Please copy me hyperlinks where I can download the applications
Thanks

Someone will come here to tell you: "read the wiki here!"
Well, you surely have to do it, then you'll discover that you have to download a program called "mtty" ver 1.42 (if I'm not wrong) and follow the instructions under "stuck on bootloader screen" under the wiki.
You have to format your device and install a new ROM. May I suggest you Tomal's 8.2? 'Till now I can say that it's wonderful!
Good luck resuscitating your Uni!

Welcome to the forum
I would recommend Tomal v8.5, the best I ever used!
And don´t forget to vote please!

orb3000 said:
Welcome to the forum
I would recommend Tomal v8.5, the best I ever used!
And don´t forget to vote please!
Click to expand...
Click to collapse
hi, have a question. are u using tomal's version,did u managed how to change weather from dhaka to different town?thanks for any reply.

Rexton270 said:
hi, have a question. are u using tomal's version,did u managed how to change weather from dhaka to different town?thanks for any reply.
Click to expand...
Click to collapse
Yes, I just selected my city (Xalapa, Mexico) and voila!
No problems so far with this great ROM!

orb3000 said:
Yes, I just selected my city (Xalapa, Mexico) and voila!
No problems so far with this great ROM!
Click to expand...
Click to collapse
sorry,i'm new on wm. i tap&hold on dhaka,then delete it,and type my town. but still shows dhaka. and also how do you restart ur ppc universal?

I'm doing all that... but my PDA is not recognized by PC!!!
HELP!!!!

anthouser said:
I'm doing all that... but my PDA is not recognized by PC!!!
HELP!!!!
Click to expand...
Click to collapse
did you uncheck "allow usb connections" on ActiveSync?
are you trying to upgrade in Windows XP or Vista?
did you read the wiki Universal is Stuck at Bootloader and it unrecognised
here is the link:http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

Rexton270 said:
sorry,i'm new on wm. i tap&hold on dhaka,then delete it,and type my town. but still shows dhaka. and also how do you restart ur ppc universal?
Click to expand...
Click to collapse
I´ve just selected form the city list and thatá all! my city appear!
To restart your Uni insert the stylus in the small hole on the back, behind the mini usb
Plase read the Wiki!!