Develop Bugs

Downgrade Artemis back to WM5

Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue

You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.

I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM

Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue

You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.

Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue

... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.

I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!

well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus

Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM

you 're right after upsl you can downgrade or upgrade... many tnx for info...

HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++

For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580

Reccommended WM6 version for iPaq hx2495b

I love my iPaq to death. I really do. But I want to stab Windows Moblie 5 in the eye IN THE EYE. Particularly since I have version 1.0.1. Can some kind folks recommend me the version/custom-build of WM6 that works best with the hx2xxx or even better the hx24xxb? I am eternally in your debt for saving me from the monster that is WM5.
Sincerely,
GK

Hello? Anyone?

check my website out, http://wm6.flyingarizona.net

Alright, I'm running into problems. I can hard-reset just fine, but when I try to get into the white bootloader, I just get a white screen, no USB anything. I've tried both 1.02.00 h and 1.00.00 h. Both do the same thing. Also, when I try to flash to the WM6 rom, I get an Invalid SKU error... I realize you guys are all very busy and tired of the WM6 problems, but could someone PLEASE help me?

Read this thread:
http://forum.xda-developers.com/showthread.php?t=329079
I think you will find all the answers

dpdurst, I have check your website, and notice that the ROM is for Hx2750, I have an iPAQ hx2495b with 192 mb ROM. Do you think if it will work for me?
Thanks

The roms for hx2000 series work and your device. And I think that the procedure is the same or very similar like for hx2490b, and for this reason I suggest the thread at my above post.

Hi dancer_69, I have just yesterday upgrade my hx2495b to WM6 using dpdurst ROM. But I have a question, why I cannot user messenger?

Just download an updated version, I think you can find it here in the forum. Use search

downgrade to WM5

hey all I am new here and i will be pretty happy if you guys can help me solve the problem i've got with HTC P3300 (artemis)
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
please help me thnx
Darren.

Did you cid unlock?
What is your SPL?
read this: http://forum.xda-developers.com/showthread.php?t=308242
Cheers

Im pretty sure it is unlocked because I did install the USPl by poof and i did try to install the original files but it still giving me errors ! What can I do we talk about 1 month phone !!! please help me SOS

Why would you want to downgrade to WM5? WM5 was a pain in my arse. so many problems I could have smashed my phone with a hammer (estwing of course) a thousand times. Have you tried to upgrade instead? a new batch of diamond roms is looking like an awsome possibility at the moment. Aside from that, are you using vista or xp?

I get the same problem: after 2% the ROM Updater (at my point this one: "HTC_1.12.405.01_026790_WWE_SHIP") says: 244 Invalid Model ID.
Also, I previous installed USPL (again) via the Artemis_USPL.
I did an update to the "Artemis Touch 4.02 Full with 4 sided cube" ROM before, so if there would be a problem with that?..
For me all the WM6-based ROMs are too slow for an 200Mhz-Phone, e.g. my Phone needs like 10 seconds to load the contacts (no other software is running at the same time..). So its getting a little on my nervs..
I tried to find a WM 2003SE ROM for the Artemis, but there is no such Version.
Any suggestions?!
edit: I am from Germany, so is this "HTC_1.12.405.01_026790_WWE_SHIP" ROM not compatible with a german HTC Artemis?

hm, if i remember correctly this is all about the different bootloader versions...
could it be downgrade (in bootloaders) is not possible..???
we had some of this here:
http://forum.xda-developers.com/showthread.php?t=282195
then again check with the versions here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
maybe this works ( though its french):
http://forum.xda-developers.com/showpost.php?p=1520661&postcount=13
and:you must use uspl before you try another rom, it might have been altered by another rom!!!
but seriously no wm5 is faster then yue extraclean!!! or comparable
greetz

another idea:
take out your sd card when trying to flash,
alternatively try sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz

thormdac said:
but seriously no wm5 is faster then yue extraclean!!! or comparable
Click to expand...
Click to collapse
how faster is it than a normal wm5 rom? are there any pictures to see how it looks like?

dor515,listen to the guys wm5 sucks,really...and for those 200mhz...try overclocking with batterystatus...you can get 247mhz all the time (which is preferred) and if you want you can set up to 300 (at your own risk)

HELP please! Burned my Diamond with ROM Update

Hi all,
i just tried an ROM update on my diamond and ended up with a probably burned diamond.
I tried to updated to "Unsigned-Hard-SPL-Diamond-OliNex" and then to Elite 2.0.
First the Hard-SPL updated didn't work an stoped at 1%.
As i figgured out i had to start the update tool as administrator under my Windows Vista.
The diamond now starts and shows the following screen:
1. A Water like Picture
2. The Text "Xda diamond" in the bottom left corner
3. The Text (in red characters)
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
4. The Character "H" (in red) next to the "Xda diamond" Text
The Diamond stops here and does nothing.
I can get to the three colors screen by pressing Vol Down and Reset.
I also tried a hard reset which worked, but i ended up at the same screen and the diamond does nothing and just stops there.
Have i completely damaged my Diamond? (I hope not, would be a nightmare to me)
I will be very grateful for any kind of help on this!
Thanks in advance!

Did u have Flash Hard SPL before?
When u didnt, the Update stops @1% whit err msg like: Wrong vendor ID
Then u have to flash hard SPL before, is sticky in this Forum.
Try maybe with a ROM from here in the first Sticky post, then u can ask for support.
hope helped u
mastah

when you get the "three colour screen" then everything
should be ok, try to reflash the device!

Hi thanks for the quick answer!
I tried now to flash again to the Hard-SPL 1.30... but i get an Error 284 at 0%.
The three color screen shows the following:
DIAM300 MFG 64M
SPL-1.40.LiMex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVI v0x30
Any ideas?
Any help welcome!
I am getting a wrack, my nerves are going crazy. I hope i can recover at least to some ROM now...

Flash hard-spl, set ur device in bootloader mode (tri-color screen. Search for it if u doesent know how)
And flash one of the compatible Roms, they are sticky in the forum.
Maybe urs spl isnt compatible whit the Rom u flashed.
When the Device boot's, and u see the red signs whit numbers, then i think its all ok...
...only incomplete rom.
greets, and good luck

http://forum.xda-developers.com/showthread.php?t=400411
CURRENT ROMS:
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_Europe_1.37.401.3_Radio_Signed_Dia mond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_NOR_1.37.409.3_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
DIAM1.37.413.3SVE (REBUILT)
COOKED ROMS:
ALL BEPE ROMS ARE SIGNED AND ARE PART OF THE ELITE TEAM ROMs DIVISION, SEE INDIVIDUAL THREADS.
Elite 2.0
PDAVIET DIAMOND_1.37.08.01
tlr-diamond-1.08.06.20
tlr-diamond-2.08.07.01
DIAM.DAN.137.403.3-Cyphol
DIAM140 (EDGE Only Diamond):
indian_ship_rom
http://forum.xda-developers.com/showthread.php?t=400402
Hard-SPL or how I learned to stop worrying and love the MPU
If this not work try with spl dev-edition:
http://forum.xda-developers.com/showthread.php?t=400950

thanks for the suggestions.
i will try what you said and see what i can get.
thanks really much for your help this forum is amazing!
hope i can finally live again with my diamon which i already like so much...
thanks again!

ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain

thanks mashta,
i will try it on vista 32 first, since i do not have xp here
thanks again for all the help!

On Vista 64, I had to take the following steps to have it working:
Fisrt: connect the device in boot mode to the PC
Second: wait until Vista installs a driver update
Third: disconnect the device and restart the PC after the update is installed
Forth: right-click on the RUU executable, and choose
compatibility mode with Win XP SP2
Fifth: run the RUU, cross your fingers and start praying
As how to enter bootloader, press volume down and reset simultaneously
s1rl4ncel0t
Senior Member

mastah said:
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
Click to expand...
Click to collapse
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
It worked out of the box, without any special drivers installed whatsoever. I believe there were some drivers installed when I got it into bootloader mode, but aside from WMDC I didn't install any extra software

Milenco said:
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
Click to expand...
Click to collapse
Lucky boy, but many peoples has probs whit vista
and maybe it helps to try on a other os to find
whats the bug
and helpfull site:
http://www.modmydiamond.info/

sounds like a bad flash? i once had the same problem with HTC tytn2, and i managed to contact forumer GSLeon who helped me out. he said "after a bad flash,u should never keep attempting to flash again, because u may permanently brick your phone"

THANK GOOD IT WORKS AGIN!
And now the asnwer what was the problem:
A ****ing USB-HUB from MSI!
I had my diamond connected throu that USB hub and so everytime i tried to flash i had communication errors at 0% or 1%.
I connected the diamon directly to my pc and guess what:
It worked like a charm.
THANKS AGAIN TO ALL THE HELP FROM PEOPLE HERE!
This forum is realy amazing.
Thanks again very very much!
I am so happy to have my diamon back
And i will never buy a MSI USB HUB again...

A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!

Blob8me said:
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Click to expand...
Click to collapse
Releived is not the right word, back to life fits more
Thanks again for all the help i have got here!

davidl said:
And i will never buy a MSI USB HUB again...
Click to expand...
Click to collapse
Just so that in a few weeks time when someone else searches and finds this thread.........
NEVER US ANY KIND OF HUB TO FLASH A PHONE, ALWAYS PLUG THE PHONE DIRECTLY INTO YOUR MOTHERBOARDS USB SOCKET
Oh and davidl you are one lucky son of a *****

people could read a bit more before trying to help - the guy obviously had the hardspl flashed because of the version that was reported in tricolour. (1.40.etc...though it was mistyped )
anyway good that it got resolved OK. using hubs is indeed not recommended.

welcome to the darkside of the diamond
hi guys
i'm just beginnin' and talkin' to you from my diamond an' my ****in' orange french default rom the 1.73.73.2
so for those who know that it was made by sons of *****es for their bros,
i was going crazy to about this problem but you guys are really marvelous an' think know that i have the answer to my problem.
but i'm a new bee as you can see and i'd like to know if i have to install anyway hard spl?
i just want to delete this ****in' rom...
excuz me for my english and one million thanks for that precious help

3 ... 2 ... 1... Ooooh he got banned!

Problem after HardSPL upgrading :(

Hi everyone,
I've just upgraded my (french) Diamond's HardSPL with the OliNex version found in the topic "Hard-SPL or how I learned to stop worrying and love the MPU". Everything was OK at this time so I booted and HTC "reinstalled" the TF3D interface files.
Everything is still working but when I tried (several times) to upgrade the Radio version to v1.00.25.05, the program stays at 0% for 3 minutes and then gave me the 262 update error. I tried to connect my Diamond to different USB ports but didn't change anything.
So I decided to download the official update from HTC website and install it (witch I did) but this update doesn't work too (same error)
The strory is not so bad because my Diamond is still working but I want to install an unofficial ROM...
PS: sorry for my english and thanks for your help

@tompim
The first post in the radio thread is worth reading carefully:-
http://forum.xda-developers.com/showthread.php?t=407956
I suspect that your problem is that you need one of the unsigned / developer hardspls for standalone radio upgrades and you are using one of the "signed hardspls"
http://forum.xda-developers.com/showthread.php?t=408621
http://forum.xda-developers.com/showthread.php?t=400950

Thank you very much for your explanation (i read the radio thread before strarting ).
In fact I want to install the Diamond Project Rom that need theses (http://forum.xda-developers.com/showthread.php?t=408621) HardSPL version but I don't know what version number choose (I tried with the 1.34 and the same problem appeared

To remove all doubt and be able flash virtually any rom, flash the developer edition unsigned Hard-SPL from http://forum.xda-developers.com/showthread.php?t=400950. It should do the trick for you.

Works like a chrarm thanks!