Hi everybody,
Can someone help me,
I have a Qtek 9090 and I forgot the WM security password I entered, and now everytime I try to enter a password the delay time is doubling and I have to wait for this time to retry.
Is there any procedure to reset the password/ the phone,
I tried the hard reset with holding On/Off and soft reset but that didn't work,
Thanks in advance,
password forgoten
I'm with the same problem :S
there's anything we can do?
thx
Related
I tried to do an hard reset following the recommended steps (pressing both '-' keys and soft reset at the same time), appeared the screen 'press 0 to restore' that I have done and after that nothing happens... seems that the i-mate has died!!! screen goes off and nothing happens after.
Could you please help? I'm in Madrid-Spain, should somebody locally could help.
Thanks in advance.
++++++++++++++
UPDATE and FYR
I have connected it to the PC with the USB cable and upgraded it to the latest available from i-mate. It came back to life...!!!
PS: mwang, thanks for your reply.
try to just push reset buttom to see screen come out or not ,otherwide dead.
hi all,
i have a Qtek 9090 (spv2000 orange) on wm2003ce 2eme edit
i make the upgrade in wma 5 by blue angel.
the pda restart with wm5 but. i have a lot of problem :
- first, i cant synchronise with activesync 4.1. it ask a password, and i have to enter my last password, juste after, it crash.
secund : the phone doesnt work. i dont know why.
i try a hard reset on it, nothing change.
please helpo me i'm in trouble. :roll:
Hi,
I have a problem with my QTek 9090.
when i want to hard reset it, (power, record, camera and reset) it just displayed the 4 colored bands and stuck here.
how can i restore the normal booting sequence ?
thx.
this is normal, no problem. OS is kichen, no orginal. My Qtek work perfect WM6. Thanks Helmi!
so what should i do because it is block on this stupid 4 colored bands screen...
hard and soft reset do not help.
are you sure you have chosen No/Yes/Yes to clean the registy hive and format the storage at hard reset?
have you pressed the Mail Button to execute the instruction?
being stuck at the 4color screen is a common glitch in wm6 upgrading but nothing serious, that's because even though you flashed the ROM, your storage still has the files of your OLD Os (ex. WM2003).
you have to format the storage to have a fresh and working OS.
the problem is that i did not get any message on screen to which i can answer yes or no :-(
i effectively read some article in this forum about such step, but my Qtek 9090 did not propose me something like that !
:-(
i tried the steps you posted in http://forum.xda-developers.com/showpost.php?p=1603200&postcount=8
but the menu is never displayed :-(
oh... ok.
try pressing Camera + Record... before you stick the Soft Reset.
hold them until you see the menu.
if that doesnt work. then maybe one of the required button is failing.
good luck!
unfortunatelly, it does not work :-(
this is making me crazy...
try searching for MMTY hard reset. that's probably the thing that you need.
i did not find anything about MMTY and hard reset...
:-(
any additional help would be very appreciated
You would find you get a better response if you explain what rom it was that you were installing when this happened,was the rom for your device and did it complete fully?
scousemartin is right... we need details.
about MTTY ok...
here's a link about MTTY on Hermes Bootloader... some of its commands are general and can be used on BA with care.
look for something specific to your problem
i.e. Task 28 to format your DOC.
I've got very bad problem. I've set password on Windows Mobile 6.5 in my MDA III. And someday it happened... I couldn't turn on the phone mode so I've used soft reset option in xcpuscalar mounted on device. At start it asked me for the password. I'm 100% sure I've typed the correct password (even compared with password I wrote in my notes) and it says that's "The password you typed is incorrect".
I tried several times and nothing. I tried even to hard reset (Power button + reset button), but it seems it does only soft reset (so I don't know how to hard reset it at all). I've tried to discharge backup battery, even took it of. Nothing helps. Please help me with this.
I want to hard reset, but I don't know how? The procedure has changed since WM 6.5? Or help me with solving problem otherwise.
Sorry for my bad english.
the password bug is long since known. that's why it is generally better not to set one on a cooked rom. as far as i know there is no way to reset the password, so i would advise you to hard reset.
that is indeed done differently in wm6.5 than in wm2003
you have to press power +reset and then immediately press camera+record.
a menu should appear.
using the camera and record buttons you set the menu entries from "NO", "NO", "YES" to "YES", "YES", "NO" and press the mail button to confirm, after a little while the device restarts and is hard resetted.
Have the same problem, company policy is enforcing password security....
No chance to cheat that bug? Or any rom without that secured evaluation mode available ?
Thanks and best regards,
Muskote
WM 6.5 lock issue
I have the same issue on my HTC Vogue phone, I haven't hard reset it because I can still answer calls, and I would like to synchronize 1 last time before I hard reset and have to reinstall all my apps. Anybody have a way of bypassing this feature? An NV item to change maybe? I can mtty when I boot into bootloader screen and "rtask c" to get into diag mode and access CDMA section of phone, anything I can do from there? The lock on CDMA is not the same of the WM 6.5
muskote75 said:
Have the same problem, company policy is enforcing password security....
Click to expand...
Click to collapse
They enforce password security but let you flash the device with a ROM of obscure to unknown origin?
Dirk
spades you nailed it again, exactly what i was thinking, plus there is still nothing new to say, that i didn't write in my other posts, and also, this is the blueangel section, not the vogue's we are 99% dealing with gsm devices here, nearly no cdma.
sorry can't help you.
Same problem here...
I'm facing the same problem...
My phone is HTC Himalaya (XDA II) with WM6.5
I cant enter my phone. it keep asking password altough i entered the correct password.
And it doesnt confirm anything, like ur password is wrong.
the button is pressed but nothing happends.
My contact and my task are synced with exchange server, but i hav plenty important SMS in that phone...
Is anything i can do except hard reset the device?
Btw, i still can receive any call.
Last nite this phone is OKAY, the problem appeared in the morning.
Micro**ft let me down again.
Anyone please help me!!!
as probably you are aware of the fact that this is not the himalaya section (which doesn't matter as this is a general wm problem), and since you posted in an older thread (which i assume, you read before) the only thing i can tell you is,
there are no new known ways around that problem but to hard reset or re-flash. i understand that people want to protect their phones, the password just does not work (yet)!
but to get to your real problem, i have never set a password and do not know if you can still sync the device w/o entering the password, but there is a neat little program called -=Windows Mobile SMS Sync 1.3=-. try that to back up your sms, but i don't know, whether you'd be able to restore them to the device. -=spb backup=- or -=DotFred's pim backup=- are programs for the ppc that are also able to back up and also restore sms, but you probably can't run programs, when you can't get past the password screen.
i hope any of this works for you, and i hope you learned your lesson, not to set a password in a cooked rom
Hi
I have a O2 xda mini s....
http://ecx.images-amazon.com/images/I/31M7con3EuL._SL500_AA280_.jpg
i got some problem... need your help
i have set its password to "988777" and it was working fine...
just 1 hour ago, i tried to open an image and set it as todays wallpaper, as i clicked (tapped) on
menu, my PDA got restarted, now its asking for password to unlock, when I enter "988777" it says
incorrect password and starts a countdown which is always double of previous count down. for
example this time it was 00:08:10, next time it would be 00:16:20.
Please help me !
Best Regards,
Farhan Sh.