Related
hi all ! im very new in this domain ! first here is what i DID : i have this XDA with ver 1.6x (something like that) and i wanted to upgrade to the new version from www.microsoft.com/etc etc...! so i dld it and started to write the new version.The program deleted my old version of windows and started to write the new ver after doing all the checks.But my laptop suddenly got into stand by when the program was writing the new soft at 7%.He said i should unplug then reset and re plug the poket pc! i reset it with my stilus and try to reconnect but now my setup program for upgrading doesn't FIND my XDA II at all....he tells me to connect the poket pc to cable.When the device want's to start i get the screen with O2 and the version down in the right corner but it wont get passt that...that is why probably the soft from my laptop says that i should connect the pda...my pda doesn't BOOT ! right ?...so...now my big question...is there a program that i can use to WRITE windows mobile to my XDA II ?..so that he don't checks the version...he just overwites all data so my xda will work again! hopefully somebody can help me...or maybe is there a program that can delete all from my xda so i can start to write the new version to it ! pls ..smb help me with that ...i need to fix this very quick..if not im a dead person..PS :i forgot to mention,,,..my PDA doesn't belong to me ..so this is why im dead..if i don't get soon a new ver of win to it !...i'll wait for your answer...! so the final question would be...where to find a TOOL that can WRITE my ROM without DETECTING (without active sync-cause this prg doesn't recognize anymore my XDA2) my PDA !...IF someone can help pls write me quick..you can also write me on yahoo: [email protected] ! thx alot guys
you get the upgrade files from www.my-xda.com not from microsoft....
re-do the upgrade dude.... goodluck... check out DCS's thread about upgrading
i upgraded (and switched languages in the process) my girlfriend's iMate 2k2 ( a.k.a. XDA2/MDA2) by flashing with an upgrade from my cellular provider.
the first time, things went wrong and I saw USB and some weird junk on the screen.
panicking, i decide to try it again.
this time it erased everything, and crashed when it came to 15 percent of the writing part.
REALLY spooked, i tried it a third time, and sat in front of the laptop to prevent a screensaver or hard-drive-spindle-down from happening, and the upgrade went smoothly.
it was a boring 45 minutes, occasionally jiggling the mouse to keep the computer alive, but it worked.
so try and try again
Thx All For Help
i've read a post by DCS a after that all went smooths for my noob knowledge ...the 3 button reset hlp me alot cu guys ..and HF!
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
could you please clarify this statement
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
in particular the bit "for two three times"
ta
I meant that after typing set 14 0 did not help so in frsutration I thoight of typing something more like set 14 10, set 14 9 set 14 20 also...then I did the flashing again...I got the success...
my msn : [email protected] pls add me...I am normally on line 07.30 to 09.30 IST and 22.00 onwards IST(Indian Std Time).I can help u out
great info. I suggest the following as well:
- If after upgrading and reset, still see Serial 1.0, UpGRADE THE RADIO, and reset again (for mor info search for "MDA PRO is alive"). It will work.
- And, as Dherrero said to me, Dont' worry! there is almost always a solution for your problem (99%).
Same problem, still can't get Jasjar working
Hi -
My Jasjar is now sitting endlessly at the blue imate boot screen, showing the new ROM version numbers. Help!
I've tried "hdubli"s suggestions, but to no avail (although i still have no idea what "set 14 0" was meant to do, or what i was meant to see on screen afterwards!) I also tried "set 14 10", "set 14 9", "set 14 20"...
I've tried reflashing down to the older ROM version, then back to the latest ROM(several times now).
I've tried the following update: http://forum.xda-developers.com/viewtopic.php?t=42992&highlight=bootloader
I'm re-applying the imate official rom now, as i don't know what the above version one is.
But it's still hanging at the blue startup screen...
- It seems to be ROM version independent
- what else is there that i can flash? could the bootloader be corrupt or something?
- iMate online support walked me through reapplying from bootloader, and removing the battery, but that was all they could offer. THen referred me to a 'local service agent'.... but that could take days...
Can anyone help?
/Mark
Re: Same problem, still can't get Jasjar working
mcackay said:
Hi -
My Jasjar is now sitting endlessly at the blue imate boot screen, showing the new ROM version numbers. Help!
I've tried "hdubli"s suggestions, but to no avail (although i still have no idea what "set 14 0" was meant to do, or what i was meant to see on screen afterwards!) I also tried "set 14 10", "set 14 9", "set 14 20"...
I've tried reflashing down to the older ROM version, then back to the latest ROM(several times now).
I've tried the following update: http://forum.xda-developers.com/viewtopic.php?t=42992&highlight=bootloader
I'm re-applying the imate official rom now, as i don't know what the above version one is.
But it's still hanging at the blue startup screen...
- It seems to be ROM version independent
- what else is there that i can flash? could the bootloader be corrupt or something?
- iMate online support walked me through reapplying from bootloader, and removing the battery, but that was all they could offer. THen referred me to a 'local service agent'.... but that could take days...
Can anyone help?
/Mark
Click to expand...
Click to collapse
Hi all,
I have been following almost every thread of this forum for the past week or so, && this is the first time i have come across another person who is suffering from the same problem... Hi Mcackay... I have the EXACT same problem... I have been given some suggestions which i shall try soon... If anything atall works i shall let you know bro... && please inform me if you find any solution...
mOrph
May be this will help further
If one has tried to update Atom/Wizard ROm...will certainly notice that the upgrade process doesn't start unless the battery is >50%..so this is the biggest clue.
Those who want to upgrade make sure that their battery is more than 50%..no one will face the problem.
So those huys who are already in problems...shd try to get their friend's battery which is fully charged and then do the ROM Update..
This will certainly solve their problems.
I installed the new ROM but every time it just said 'congratulations all done etc.....' and I could not get out of bootloader mode.
I did a hard reset to get the white screen and then had the choice of X or 0, but both put me back at the grey screen (where it is just possible to read USB and serial 1.0).
After doing this 5 or 6 times, I found the old radio 1.06 upgrade and ran that, and on completion it allowed the universal to start up AND the ROM files that I had sucessfully installed (see above) were there.
Only problem is I now have 1.06 radio and not 1.09, but i can do an upgrade for just that later.
steve
i cannot make it start i have tried to write in mtty set 14 0 , set 14 9, set 14 20 but nothing.also i ave triedto install almost all rom but everytime stucks in the blue i mate image,any ideas please???
angeln20 said:
i cannot make it start i have tried to write in mtty set 14 0 , set 14 9, set 14 20 but nothing.also i ave triedto install almost all rom but everytime stucks in the blue i mate image,any ideas please???
Click to expand...
Click to collapse
Hi buddy... Am facing the same problem for the past 15 days... My JASJAR has been stuck on the blue imate splashscreen mode... I too have tried flashing the device with all possible ROMS but to no use... One thing that we can conclude is that the problem is ROM independent... Lets work on this together.. There are other 2-3 people on this forum who are facing this same problem... Lets put our heads together && work out a solution... If there is any success at my end, i will update you asap.. PLEASE do the same...
Regards,
mOrph
Almost the same problem I have
Almost the same problem I have with MDA Compact II Now the device is dead the screen blinks. somebody told me that there is a software that works on dos mode and reset all to bring it boot loader & and so there is a bottun inside the device to to clear every thing. But I don't know how???
I also have the same problem stuck on 2nd splash screen
This all started when I used the official imate Jasjar ROM upgrade from the clubimate site (since I have an imate Jasjar). I've come a long way in understanding how to manually upgrade the ROM and have tried numerous ROMs, radios, etc. and still won't go past the splash screen. I'm hoping I we can figure it out today.
no luck yet.i cannot to something and i am afraid that the battery will empty.....
I'm hopefull - I'm online with imate support
I keep on getting disonnected from their support, but so far they said "its just and error but i will help you to fix it so please me the IMEI number" so I gave him my IMEI number and he's supposed to email me the fix. We'll see ..... I'm keeping my fingers crossed.
morphosin said:
angeln20 said:
i cannot make it start i have tried to write in mtty set 14 0 , set 14 9, set 14 20 but nothing.also i ave triedto install almost all rom but everytime stucks in the blue i mate image,any ideas please???
Click to expand...
Click to collapse
Hi buddy... Am facing the same problem for the past 15 days... My JASJAR has been stuck on the blue imate splashscreen mode... I too have tried flashing the device with all possible ROMS but to no use... One thing that we can conclude is that the problem is ROM independent... Lets work on this together.. There are other 2-3 people on this forum who are facing this same problem... Lets put our heads together && work out a solution... If there is any success at my end, i will update you asap.. PLEASE do the same...
Regards,
mOrph
Click to expand...
Click to collapse
i agree this, i also got problem with my exec,
some of thread told us use mtty set 14 0, or just falsh single rom such llike radio rom or nk.nbf, tied many time, tried may ways of reset, boot options, other version and kinds of roms, still no work for me,
I did solve the problem with 3 Unis by what I hv explained above...I think it is Flash Chip related issue...after upgrade it is just not getting a kind of trigger to load the OS..This time I am really struggling with morphosin's JASJAR...it is lying at my place for past 2 days...but no luck so far.
I hv also tried following mtty commands and the results are as explained
task 28
DOC_format failed
task 0
task 7 0/1
made the Uni hang...it did not lock/unlock the ROM
rtask 0/1/3/4
In all these cases it did reset the radio...also had the Radio ROM run but still no effect on booting
May be buzz can help now as increasing number of people are getting this
problem..
I also think of some kind of Super CID in new ROMs which need to be unlocked before doing the upgrade..
@hdubli
thanks but many of my friends are helped by your post,too.
Also one of my friend, receovered by useing command with PlatformBuilder from PC, he reported me like that.
Asukal said:
@hdubli
thanks but many of my friends are helped by your post,too.
Also one of my friend, receovered by useing command with PlatformBuilder from PC, he reported me like that.
Click to expand...
Click to collapse
Hi Asukal...
Can you please elaborate the "platform builder recovery method"... I think thats the only thing left to do now...
Thanks...
FYI ... still working with imate technical support
I've made some progress with imate technical support, but still no solution. So far it's the standard bootloader - USB - Load the ROM response. I'm hoping they'll email me back today with a real answer. I'll keep you all posted.
hdubli said:
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
Click to expand...
Click to collapse
I also have been stuck in bootloader mode for days, but by following the above it sorts it every time.
I am using mtty v1.42 and simply select USB get the USB> prompt then type SET 14 0 then return. I then see HTCUSB> and close the program
I then cold boot and I am back in business. This is 100% repaeatable
Hope this helps
Stu
I'm running Vista and when I wanted to run the bootloader upgrade on my Dash I kept getting this message error. Error 260. anybody find any way around it? I've tried to manually set th ephone into bootloader mode, same result. help!! PS the error is supposed to mean "port already open" or "open port error" I'd really appreciate any help!
erro 260 - fixed
switches to my wife's laptop that had XP on and it worked like a charm. I'd be glad to assist anybody in the process od de-branding their Dash. Removing the ugly T-mobile paint logo on the unit was easy too.
ERROR 260
Sorry for thislong story....
OK, I've been on looking around the site for a while. I installed the WM6 Beta. I was looking for two days for the WM5 ROM only because I want the little things to work. Finally found it. But now every time I try to flash my phone ack to WM5 bI keep getting the 260 connection error. The readme only says to restart the comp and phone and try again. I have literally, no joke, done this 12 times in the last 2 hours, hoping maybe it will go. All the phone does is go to the green, blue, and red screen and stays there. Then the comp says it gets the error. I know it's connected because Sync Center syncs, I can look through the phone, install apps from my comp, etc. Also I tried doing the 'Update only' rom for version 1.11 or so, and it starts to go but then says its the wrong version RUU. Has anyone had this problem before? Flashing to WM6 did this once and then worked after.
I'm running Vista Premium, stock sync cable, Microsoft Sync Center for vista. All this is the sameas when I flashed to WM6.
There goes another 3 attempts, trying to change timing, reinstalling Sync Center, etc.
Decided to try it on my XP desktop, and for some reason, first time it worked. Maybe Vista didn't like it? Who knows..
Mladito Vista!!
Hi there,
I have the same little problem here!!!! I have a laptop with Vista (garbage)... so i´ll try on a laptop running XP...thank you for posting this, it was a big help..i let you know how it turns out... see you around
WM5 to WM6 --> Problems at 3%
Hi all,
I've errors upgrading my phone to WM6.
I Can open the Wizard (it`s a generic to S620/S621), but in 3% i`ve an error.
I think thats my phone has a blocked CID.
How can i unlock this? i`ve tryed with tools to unlock, but without success...
Regards,
Emerson
Hello,
Welcome to the forum.
Your problem is that your phone is CID-Locked. Hence, you'd need to use a paid service to unlock it. I personally used the following service which provides instant unlocking:
http://www.gsmliberty.net/shop/htc-excalibur-instant-remote-unlock-p-1452.html
I used a credit card, it's 39.99 $ - I was done unlocking and upgrading to Windows Mobile 6 in about 15-20 minutes.
Good Luck !
P.S:
Steps to install WM6
- First CID/SIM Unlock using GSM Liberty
- Flash Bootloader
- Install WM6 ROM (It will take some time for it to load so give it about 5-10 mins. it does get stuck at the boot screen for sometime but eventually it'll load)
- Install Office/Audio Manager
- Application Unlock your phone using SDA Application Unlocker
- Install the necessary software/tweak/hacks
there you go, if you have any questions, feel free to ask. also, if you use the search function, everything's available here.
Good Luck !
Here's the following links you require
1) Flash Bootloader
ftp://xda:[email protected]
2)here's the WM6 ROM:
http://files-upload.com/files/472108....90_Ship.ex e
here's office for those who want it:
http://rapidshare.com/files/31706137/Office.WM6.zip
here's Htc Audio Manager for those who want it:
http://forum.xda-developers.com/atta...1&d=1183909664
Ps. I better like German flash, it's smaller due to fewer language packs, and contains English, here: http://files-upload.com/files/472422....90_Ship.exe
thanks to jsp_m for the links.
Hi,
I`ve problems because my IMEI is from Brazil...
And in the site accept only 15 digits IMEI..
My imei is: 35*************02 (17 Digits IMEI)
Thanks,
Emerson
hey,
that's not a problem. everyone has 17 digits, don't include the last 2 digits when you type in your IMEI so for example
11111111111111102
just include the first 15 and submit and you'll get an unlock link in your e-mail, follow that link, scroll down to the page to download dashunlock software and download the .UNL file for your IMEI and then make sure ur phone is connected to active sync and it's green, open the dash-unlock program and then hit enter then it'll ask for the .UNL file, locate it and open it and your good to go - your phone will be unlocked then soft reset it or i think it's automatic and everything's set.
good luck !
p.s: in other words, don't include 02 when you type in your IMEI.
HTC Audio Manager
http://forum.xda-developers.com/showpost.php?p=1355010&postcount=5
Thanks!
I'll Try NOW and let all know...
Regards,
Emerson
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
tatarezende said:
Arrghhh!!
My phone still give the message:
Invalid Model ID [244]....
And now? i`ve payed 40 bucks for an unlock software....
Thanks,
Regards,
Click to expand...
Click to collapse
Emerson;
Read the second post from luckybandit on this thread. That´s exactly what to do to get rid of the "invalid model" issue. Download the bootloader, flash the phone, flash the new ROM and be patient.
My excalibur is also from South America, and worked OK. If you have any doubt just let it know to this thread.
Boa sorte!
Hi,
I`ve problems with the link of Boot loader....
Anyone can send the full URL?
Thanks,
Regards,
Emerson
Hello,
I'm sorry about the links not working, here - i've attached the bootloader for you. here's what you do
1) Run bootloader (attached file)
2) Run the WM6 WWE ROM
3) Run SDA Application Unlock
4) Install Office/Microsoft Voice Command/HTC Audio Manager
5) Install Tweaks/Hacks
here's a site that has some applications and tweaks:
http://mobile.surrealnetworks.com/DashApps.htm
and search this forum, there's tons of information, hacks - etc.
Good Luck !
oh by the way, did you unlock your phone properly?
1) Download unlock software
2) Download .UNL file specifically for your IMEI
3) Connect phone to computer and make sure the activesync's icon has turned green
4) Run unlock software
5) When unlock software asks for .UNL file, browse for it, choose it
6) That's it ! It should say Unlocking done and it'll reboot
Your phone is now Sim & Cid Unlocked. If you have more questions, feel free to ask. just do what i said first then post.
Good Luck ! Hope to see everything working for u...
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
tatarezende said:
Hi again...
Now i`ve the Error 260 message everytime my phone boots in "Flash mode" (3 color screen)....
Follow my configuration in this screen:
Excalibur Wi-Fi RUU
ONBL 1.15.0000
Excalibur
SPL 1.15.0000
Excalibur IU
ERROR [260] - No connection
Click to expand...
Click to collapse
Hi,
Are you using Windows Xp? Cause I've gotten that error a couple of times too but it was in Vista. Try Xp if you're using Vista.
Hi!!
DONE with XP.... but now i`m affraid!! The "Green Screen" with nem OS apparently locked... this is normal? at least 3/4 minutos in the same screen.. both "patches" are applyed sucefully....
Is there anything else to do now?
Hy guys,
I encounter the following problem with my device:
it generates a file called "DbgToStorageLog" on my root, taking space from my memory (several logs, 2,3 of sizes up to 3MB)... it also generates other files "HTCExceptionLog". The first ones i can't delete (except for one. eg: i have 3 files, i can delet only 2 , one has to remain... message: file is in use), the second type of files can all be deleted... but show up again.
Please help me solve this problem
Many thanks in advance
The way to resolve this is to use notepad and save a blank page as DbgToStorageLog1.txt.
Do the same and save DbgToStorageLog2.txt, then 3, 4 and 5. Do the same with HTCExceptionLo, save as a txt file.
All these saved files will have a size of zero bytes. Select properties on each of the newly saved files and make them read only. and replace the ones of the same name on your device. The files will not increase in size.
Note, you may have to soft resetIf if any of the DbgToStorageLog files displays an error to being replaced...
Brian_bs
Thank you very much... after several days of tring, i nov have 6 files: DBG to storage : 0,1,2,3,4,5 all having a value of 0B ).
By the way, i have another problem.... my screen looses alignment and i have to realign it... sometimes it realignses itself.... this happends when I use several programs at once. Is thi software or hardware fault? Would changing the screen solve it...
thanks in advance for your answers
DbgToStorageLog multiple files
Hi,
I have encounter a problem plz help me problem is,
Form last few days I am testing multiple rom on my device (Xda orbit),with in testing I don’t know when this thing happen which is multiple “DbgToStorageLog0.txt, DbgToStorageLog1.txt …” files created on device root some time one of these file is more then 5mb and my device gone too much slow and some time gone in hang state or some auto restart . I try to solve this problem by doing orignal rom of “O2 xda” but no success .i also tried method of manually created file of 0k size but bettery backup problem remain same means some processing countinously occures for creating that file and waste battery
plz tell me what to do?
Sorry for bad english
Thanks in Advance
In Registry explorer (SKTools) search for key: DebugLog (HKLM\Drivers\BuiltIn\DebugLog\), rename Htc_Lib.dll (delete simbol "_"), change index from 2 to 0. Save and exit SKTools. Soft Reset.
After soft reset - delete all DbgToStorageLog.txt.
In some cooked roms this key is missing. Sorry for English poorly.
Thanks you very very much spgi
after long time somebody response, your solution solve my problem and i am very glad but after doing this my orbit goes too much slow and when i tuch screen it response after 3 to 4 sec and beep trice. So when roll back to previous values "Htc_Lib.dll and index=0" then my orbit give response fast as compared before but start loging files "DbgToStorageLog0.txt ..." again
please give any solution
or if you have o2 orbit and working prefect then give me your "HKLM" registery backup may be this can solve my problem if its possible to import registry of other device
Thanks again for your help
Sorry for bad english
Hi, This problem occurs when GSM data is deleted.
See this post http://forum.xda-developers.com/showpost.php?p=3665608&postcount=52 and follow the steps and maybe this problem will not occur again.I had that and now my device works perfectly. Good luck and I hope to help you.
Thanks a lot "spgi" you have solved my big problem thanks again
helding
Hi again spgi,
As you solve my problem earlier please tell any solution for my problem now
I correct my orbit as u told but after a week my device going in held condition too much and then I doing soft-reset but after some soft-rest its not on even I press power+soft-reset+talk button, but after putting battery out from device for a day then press power button its on and held at boot screen now I can hard reset with official Rom through memory card and some time its success or some time screen fill with horizontal white lines and device goes in not responding mode until i put off battery from device its not off, then same problem of waiting 24 or some time with 5 min its starts. If rom successfully burned then with 10 days same thing happen with my device (helding ). I don’t know what happened to this orbit ,even I used o2 xda from one year and flash lot of rom nothing happened with xda, but orbit give me lot of problem.
Do you have any solution?
I appreciate your response
sorry for bad english
Thanks againg for helping me
Hello,
My HTC 3300 is blocked on Windows start screen.
I have hard reboot my device and un screen with 3 color appear.
When i plug my device with USB cable, my computer play a song to inform my device is well connected.
But when i launch Artemis USPL, a popup appear with the message : "No Device Connected : Would you like to try copying again ?" Yes, No, Cancel.
I'm blocked a this step.
Can you help me ?
Thx
PS: Sorry for my bad english. I'm french guy.
hi guys,
i have the same problem....
I was trying for the first time to upgrade my Artemis!!! I DIDN'T DO THAT!!!!
Please help me!
TNH
USPL only work if you are in WM. It doesn't work at the booloader.
Zecanilis said:
USPL only work if you are in WM. It doesn't work at the booloader.
Click to expand...
Click to collapse
yes... i know
i am reading.... i am looking for a solution.
I read on the POF USPL guide that probably (Unfortunately ) this problem should be caused by same PDAmobiz tool!!!!
i am being funny!!!
yet another bricked artemis owner
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
zikizile said:
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
Click to expand...
Click to collapse
It solved my problem: I've played around with some dll's on my Artemis and it won't boot anymore.
Just one thing: you must type password BsaD5SeoA, cause it's case sensitive.
THANK YOU VERY MUCH!!!
Hi guys,
i fixed my problem!!!!!
i flashed an official ROM (1.12.405) using a SD card (512mb)
now i'm going to work with ARTEMIS_USPL!!!! WOOOOWWWW
owner of a brick called artemis
glad it helped you solve problem...
when I was young I use to poke with programming...
but that was looooong time ago (remember zx spectrum?48 kb ram..haha)now you got it in your pocket(working if you're lucky guy, not like me)
Any way, point is:
never give up!!!!
Yes, I agree with you: NEVER GIVE UP!!!!
I'd like to help you, i'm not expert people on this work...
I just read a lot of good indications on this forum.
Good Luck
Thanks man,
I'm trying to find another motherboard,before I start playing with this one.
Maybe you know where to get one for artemis?(arte 200)Or someone with broken screen not willing to repair it?
cheers,
z