Develop Bugs

Universal Dead flashing

Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.

1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.

device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks

That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.

Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414

i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?

The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.

hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot

Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz

hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot

Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.

connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz

hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz

are there any useful hints extrem69 ?

no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?

siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.

wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................

Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.

Upgrading HX2110 to WM6

Okay, I've finally got WM6 on my HX2110. For any other people having the same problems I did, here is exactly what I did. What the guides I've found don't tell you is where to find it, and what to do when you get it. Basically you need to trick the iPaq into thinking it's getting the original 1.00.00.l firmware and then switch firmwares. You need to downgrade to the original H firmware before the iPaq will accept wm6. This worked perfectly for me after two days of trial and error. More detailed steps are below, but basically its: flash with 100l, reset, run 100l and swap firmware with 100h, flash, run 100l and swap with wm6, flash
Prerequisites:
Advanced_pack_for_hx2xxx_to_WM6
iPaq HX2110
USB connection to computer
1) Hard reset iPaq. Do this by holding the calendar button and itask button (curved arrow), and then put your stylus into the reset hole on the bottom of the iPaq. This will hard reset it.
2) After doing that, put it in to bootloader mode. You do this by holding the contact button (to the right of the calendar) and the itask arrow, and then clicking the reset button on the bottom. It should now be in bootloader mode. unplug the power/usb cable and plug it back in. hit the calendar button. it should now say USB.
3) run hpRUU.exe under the Wm5.0 for hx2000_1.00.00.L_ENG folder. It's found in provishki. it will flash your ipaq to 1.00.00.l . let it flash all the way.
4) hard reset the ipaq and put it in bootloader mode. see steps 1 and 2. make sure it says USB.
5) do step 3 again, but this time don't click upgrade. rename the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file to 100l.nbf
6) go into the SP32408_1.00.00.H_ENG folder and get the NBF file from there. copy it into the 1.00.00.L folder that we were just in. rename is to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf. click upgrade. let the upgrade finish.
7) repeat steps 1 and 2.
8) delete the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file that you just copied over and rename the 100l.nbf file to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf.
9) run hpruu.exe again. DO NOT CLICK UPGRADE.
10) get the wm6_wwe.nbf file and copy it into the directory we were just in. rename E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf to 100l.old and wm6_wwe.nbf to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf
11) click upgrade. let it finish.
12) repeat step 1
you should now have Windows Mobile 6 on your iPaq. Good luck

I've been finding things that said I need to downgrade my firmware to 1.00.00.h after doing the 1.00.00.l version. I can't find L for the life of me. All I need is for someone to show me where I can get it. The only sites that bring anything up about that are russian.

jsbarone said:
I've been finding things that said I need to downgrade my firmware to 1.00.00.h after doing the 1.00.00.l version. I can't find L for the life of me. All I need is for someone to show me where I can get it. The only sites that bring anything up about that are russian.
Click to expand...
Click to collapse
Hi jsbarone
You may study and try from this:
http://forum.xda-developers.com/showthread.php?t=330682

hkksl said:
Hi jsbarone
You may study and try from this:
http://forum.xda-developers.com/showthread.php?t=330682
Click to expand...
Click to collapse
More info found here
http://forum.xda-developers.com/showthread.php?t=329079&page=9

updated with my guide on flashing my hx2110. it worked well for me. it's not perfect but hopefully it will help someone with the same problems I had.

Thanks Man you saved my day... everything worked fine!!!

At last, I done an upgrade to WM5 (still waiting for help to understand how to upgrade to WM6)...
May I Ask A question?
Everyone doing an upgrade have a slower PDA?

cant make it work :-(
i did precisely as described in this article, but now i got a "bricked" HX2110.
I only get to the loading screen with the version 5.20.00.H ENG
Someone had an idea??
Thanks!!
//Pzymex

pzymex said:
i did precisely as described in this article, but now i got a "bricked" HX2110.
I only get to the loading screen with the version 5.20.00.H ENG
Someone had an idea??
Thanks!!
//Pzymex
Click to expand...
Click to collapse
The answers are all in the Posts above.

Hkssl:
But that was i did.. My device is not even able to boot in any of theese steps..
should the device be able to boot after every upgrade???
but i will try again...

pzymex said:
But that was i did.. My device is not even able to boot in any of theese steps..
should the device be able to boot after every upgrade???
but i will try again...
Click to expand...
Click to collapse
i might find the problem, i think i started with wm2003. do i need any prerequities to upgrade from WM2003 to wm6??
and what to do when I already bricked my hx2110?

something it's not clear for me... When we run hpruu and 100% of instalation it's complete the devive restart it self. Do we have to wait there? wen do we have to do the hard reset?

I did it!
my advices are
1)start installing from windows mobile 2003
2) do not restart the pocket pc before the windows log-in screen appears!
Good luck!
Thanks!
sorry for my english

So many thanks for your tips.
I have some friends who couldn't flash by ordinary steps, I hope your guides will solve their problem on upgrading to my Thai Customized WM6.1.
Cheers,
Keng230

pzymex said:
But that was i did.. My device is not even able to boot in any of theese steps..
should the device be able to boot after every upgrade???
but i will try again...
Click to expand...
Click to collapse
My device is Original WM2003, are there any prerequities before doing the upgrade mentioned in this article?

Hi!
I'm having some problems with my Hx2110...
When flashing my working ipaq (Step 6), my computer halt.
So, i run HPRUU to reflash again, with no luck (because of "incorrect device SKU). Of course, model ID returned of my bricked IPAQ is "¨¨¨¨¨¨¨"...
But i have another chance, i try universal bootloader and USB telnet, (USB> prompt never come. (Pre-Bl screen and USB on ipaq screen are ok.)
I've tried every solution in this forum, and on internet.. (well, there's a hpruu.exe patched to ignore lang/model, but is for 6xxx series only )
What happen if i put a working 2110 on cradle, when hpruu comes with UPDATE screen, disconnect usb, and connect my non-working ipaq?...this will work?. I can try this on monday.
Thanks!

2) After doing that, put it in to bootloader mode. You do this by holding the contact button (to the right of the calendar) and the itask arrow, and then clicking the reset button on the bottom. It should now be in bootloader mode. unplug the power/usb cable and plug it back in. hit the calendar button. it should now say USB.
I just have to ask this:
What we should do before Unpluging powe/usb cable and plug it back in ???
Does it means that after putting it in bootloader mode i must put it on a cradle, then unplug power/usb cable and then again plug in it and press the calendar button ??? Or else ?
Greets, Janeku

people who installed wm6 on ur hp2110, are u satisfied with it?

Guys I Need Heeelp!!
Hellow Everyone! I am having a Hx2400 With WM5 Spanish and Firmware Version 1.02.00.H. Since i don't know any Spanish i want to upgrade to WM6 English.
I don't understand what i am supposed to.... Pleeeeease Help Me ...

I had followed jsbarone instruction but after step 3, i can not put my hx2110 on bootloader mode.i don't understand why?? i put the stylus into the softreset hole but it won't work. and then it shut down.now even i cannot turn it on (i mean put the cradle power on ) so if anyone know why please help me to fix it up !!!

Data Crashes 4 newbie

Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!

please help me
Does a HardReset would help me in this???
The phone has Windows Mobile 5,
The ROM version is 1.15.515.1
Radio Version 4.1.13.42_02.89.90
And it doesn't seem to has any upgrade, so I don't believe it was a mistake in the installation or something. What do you think???
What do I need to eliminate this error and he ask me for the UnlockCode that I have??? That is all!!! PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!

I just did a HARD reset form the FAQ, and now I have from Original but i still get DATA CRASHES message..
For info it was in spanish now....
PLEASE HELP ME!!!

hell.cu said:
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Where did you see the post to fix this? Maybe we can help you with the directions if we read the post.

it was for the wizard device...... i already contact jogw99 haven't receive reply from him.
BTW it was because they want to unlock the device for 3rd party applications and something goes wrong. I only want to unlock the device for Any SIM use.
AND I HAVE THE CODE........... The deal is that i don't know why it came like that. I haven't touched at all....
PLEASE need help !!!

No one????
Is this so difficult. I am really stuck in here... What happends???

Hi, once again, so many people in this fourm and no one could help me???
I just need to know what steps do i need to follow to get the DATA CRASHES error go away!!!
PLEASE!!!!!!!!

hell.cu said:
Hi to all, i am new to this forums. Need some help...
I just have an HTC s621, fisrt i believe it was locked, so I pay for
an unlocking code WorldWideWeb. I just got it and i realized that it
is not asking me for a code.
It suposed to ask me for a code with the wrong SIM inserted. But
what it does is ask me for "SIM PIN CODE" i inserted and then it
shows me the DATA CRASHES ..... ERROR.
Could some one point me in the right direction to fix this. I dont
need a better OS, i just need the phone to work I have a BlackBerry
Curve this one is for my mom, so just need the phone to work...
It is locked??? Could this be fixed?? How???
Thanks in advance....
pd: i have just see in a post a way but i do not understand and dont now where to find the files. Please GUIDE ME!!!!
Click to expand...
Click to collapse
Sorry, i was out for a while.
is your problem already fixed ?

Not yet. Please could you help me???

hell.cu said:
Not yet. Please could you help me???
Click to expand...
Click to collapse
The following should solve your problem.
Good luck !
A) flashing ANY new ROM as CROSS-MODEL-ID update
B) Fix the "Data crashes"
In case you have problems please indicate the step letter/number which is not clear / not working for you.
Just do EVERYTHING EXCAT STEP BY STEP and everything will work.
---------
A)
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when asked for KEY-FILE or COMM ERROR#1 comes up WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) unpack the "RUU_Excalibur_TMO_US_1.20.531.1_4.1.13.34_02.79.90_Test.exe"
(right click on the .exe and select "Winzip->Unzip to folder..."
9) in the extracted folder you will find a file called like "RUU_signed.nbh" (.NBH), open it with HEX EDITOR (e.g. HexWorkshop) and locate the string like "EXCA20000" near the beginning of the file. Change it to "EXCA****" (all without the quotes, overwrite the DIGITS with STARS)
10) in the extracted folder you will find a file called like "RUU_Update.exe", open it with HEX EDITOR and SEARCH the string "BsaD5SeoA" and OVERWRITE it with "IMEICHECK" (all without the quotes)
11) start the just edited RUU_Update.exe now and make the ROM update (screen of phone will stay white ALL THE TIME, THIS IS NORMAL)
12) wait till update is complete and phone will start with the new ROM
13) To fix the "Data Crashes" problem just make a COMPLETE run of the unlocker (see B) ) and you are done.
---------
B) To fix the "Data crashes" you only have to make a COMPLETE run of the unlocker.
Please do it EXACT step by step like described now and it will work (it is ESSENTIAL that you do it EXACT STEP BY STEP)
0) turn off antivirus/firewall/everything else running in background
1) start phone in windows, connect active sync (green circle in system tray of your pc)
2) start the unlocker (phone screen will turn white, active sync will disconnect, THIS IS NORMAL)
3) when you get COMM ERROR #1 WAIT 2 MINUTES (DON'T TOUCH ANYTHING)
4) DO NOT TOUCH PHONE AT ALL for ALL the next steps!!!
5) remove USB cable
6) close the unlocker on PC
7) reconnect USB cable
8) start unlocker again and now it will complete the unlock
9) at next start the "Data Crashes" will be away.

wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy

hell.cu said:
wich unlocker did you use???
I believe you use IMEICHECK unlocker, but it cost 40 bucks. I dont need unlock I need fix the Data Crashes and enter the unlock code that i already have.
Thanks anywayyy
Click to expand...
Click to collapse
For CID unlock, try this.
Try the USPL-CID BYPASS to see what happend.
When the screen turn white, choos the rom you want.

Pocket Loox N560 stuck on boot screen. Won't start up

Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?

i have the same problem
is there anybody for help???
SOS please

Eenigmaa said:
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
Click to expand...
Click to collapse
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.

fingerstoo said:
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
Click to expand...
Click to collapse
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....

Eenigmaa said:
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Click to expand...
Click to collapse
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message

vladtapes said:
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
Click to expand...
Click to collapse
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA.
Click to expand...
Click to collapse

Eenigmaa said:
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
Click to expand...
Click to collapse
do you confirm the method is fully functional?
I made a backup of my german original rom, if i have problems i want to restore it...
have you got a backup of your old wm5?
thanks

Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!

Eenigmaa said:
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Click to expand...
Click to collapse
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...

vladtapes said:
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
Click to expand...
Click to collapse
You can if you use an translator like www.windowslivetranslator.com or translate.google.com
then it is pretty easy.

I've resolved...
Fully functional WM6.0 newplowe in English...
now I'm searching for editing it in Italian/French but I need to edit the rom part of the XIP (just that).
For doing that, I need to open decrypt the file .nbh file (don't really know howto, and newplow doesn't answer about that... ).

Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks

rcretu said:
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
Click to expand...
Click to collapse
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.

N560 - still stucked in the climbers bagground after WM 6.1 flash
fingerstoo said:
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
Click to expand...
Click to collapse
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...

rcretu said:
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
Click to expand...
Click to collapse
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...

rcretu said:
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
Click to expand...
Click to collapse
PHEW! Thank goodness. I suspect you did not do the hard reset correctly at first. But I agree about the Loox being precious! I look after mine very carefully! Glad I could help you. My pleasure....

My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!

vladtapes said:
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
Click to expand...
Click to collapse
I think you have received a reply from Newplow on his guestbook....

Hi
I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP!!
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I've done already procedure You've mentioned here with taking of the battery for at least 30 secs with hard reset afterwards but it is still climibing screen. Can U manage this as well???
THX

The most common error with the procedure is NOT making a proper or true hard reset, or back to factory settings reset. If you do it wrong, you will only achieve a soft reset, the same as you get if you just put the stylus in the reset hole in the base of the N560.
The correct procedure is to hold Power/Resume/Suspend button (on/off button) and the Calendar button simultaneously. Keep holding them and with the other hand press in the reset hole with the stylus. The screen should blank out. KEEP holding the other two buttons all this time, and release the stylus. KEEP holding those two buttons until the screen display returns, only then release them.
This should allow another burn.
I hope this is the problem. It has happened to me and others, so I think I am right. But if this fails, you may need another approach.

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english