Develop Bugs

i'm gonna kill myself..3 my friends Jasjar plus 1 qtek dead

Please guys..could anybody help me??error 150 rom upgrade utility error
this rom upgrade utility does not design for your device...
I tried everything but i can't make it works...the window is always the same ... :shock: error 150 rom upgrade utility error
this rom upgrade utility does not design for your device...
MaUpgradeUt_noID doesn't work...
PLEASE PLEASE PLEASE...thanks
mik111

Did you tried hard reset it?

First, don't get panic! Well.When I tried to unlock my device and make it Super CID that message appeared in my screen too.I tried anything I was told in this fantastic forum and nothing worked.Finally I was told to reinstalled windows on my PC and...it worked!! I think it's a problem of drivers. If you are desperated try it.
Good luck and be the force with you...

may the force be with you! :lol:
but like alberbrando said, don't panic. panic would only make things worse. try re-installing your windows. Hopefully, that should resolve your problem.

???
gtm55 said:
Did you tried hard reset it?
Click to expand...
Click to collapse
hi guys..i tried to hard reset it but nothing happend..i'm very depressed...how can it be possible??i've already done this operation with this pc..and it worked..is that possible ?drivers?reinstall windows??****..is one of the of the worst boring operations i've ever done..
any other ideas?

http://forum.xda-developers.com/viewtopic.php?t=61002

frz said:
http://forum.xda-developers.com/viewtopic.php?t=61002
Click to expand...
Click to collapse
thanks frz..i've hard resetted...nothing happend...

So do the other thing they told you and reset windows.
Which is worse? a few hours boredom of backups and reinstalls, or spending what. . . 1300. . £2600 on new PDA's for you and your friends?
I know which one I'D pick.

Try
Try with this upgrade Tools
-put nk.nbf file on this folder
-put your device to bootloader mode
-deactive active sync on your computer
-connect to USB
-Run upgrade tools
cheers
indra9110

Right, don't panic, not being able to flash isn't such a big deal.
First, get an official update package for your QTek, and for your friends an I-Mate update package.
Next, hold the power button and the light-button (next to the volume slider), and stick the stylus in the little reset hole in the back. Hold the keys for a little longer, untill you vaguely see "Serial" or "USB" on the bottom part of the screen (put a little light on the screen, as the backlight will not be lit).
At this point make sure it's connected to your PC through the USB cable.
Right-click the MS ActiveSync icon (on your PC) and choose connection settings, make sure "Allow USB Connections" is unticked.
Next run the update utility, and everything should be fine again
If this doesn't help, ask again and state clearly that you've tried this already.

TheBlasphemer said:
Right, don't panic, not being able to flash isn't such a big deal.
First, get an official update package for your QTek, and for your friends an I-Mate update package.
Next, hold the power button and the light-button (next to the volume slider), and stick the stylus in the little reset hole in the back. Hold the keys for a little longer, untill you vaguely see "Serial" or "USB" on the bottom part of the screen (put a little light on the screen, as the backlight will not be lit).
At this point make sure it's connected to your PC through the USB cable.
Right-click the MS ActiveSync icon (on your PC) and choose connection settings, make sure "Allow USB Connections" is unticked.
Next run the update utility, and everything should be fine again
If this doesn't help, ask again and state clearly that you've tried this already.
Click to expand...
Click to collapse
Thanks Blasphemer but i've done that 2000 times with no success at all...i think that entirely rebuild the pc is my last chance... I don't wanna think at what will happen when the same old window will came out...I' m preparing my gun... :shock:

b4 attempting to flash
b4 attempting to flash,
chk if the 3 steps with mtty work,
if u don't get any error,
plz get ur battrey charged fully from a friend.
then attempt a flash by downloading a different rom from the one u r presently using
disable ur pc firewall
also disable ur anti virus [dont know if this is really required...but i read it in quite a few forums & it worked for me...]
flash only the rom
no extended rom or radio
use the MaUpgradeUt_noID
hopefully this should sort out ur problem....
i know coz i had the same problem....
frz

Another suggestion....
before making any other test, if it's possible, try on another PC, using a fresh rom (not the same used...) .... can be a PC problem, so test the procedure on another host ....

... sorry, again...
have you checked the bootloader version on the devices ? ... verify it before any other tentative ....

HELP!!! - Dopod 900 crash after upgrade to WM6

PLEASE HELP!!!
I try upgrade my Dopod 900 to WM6 by using http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip, but after the upgrade success 100%, i disconnect the USB, and hard reset the PDA, then the PDA cannot bootup, it alwaus showing the black screen...
When i try hard reset again, i can see the display show option 0 to reset and option X to exit, but try both keys which back to the same black screen...
I also try press power+light+reset, but no responses at all... when i plug in the power cord, the light for charging not on as well...
PLS HELP....

dopod900xxx said:
PLEASE HELP!!!
I try upgrade my Dopod 900 to WM6 by using http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip, but after the upgrade success 100%, i disconnect the USB, and hard reset the PDA, then the PDA cannot bootup, it alwaus showing the black screen...
When i try hard reset again, i can see the display show option 0 to reset and option X to exit, but try both keys which back to the same black screen...
I also try press power+light+reset, but no responses at all... when i plug in the power cord, the light for charging not on as well...
PLS HELP....
Click to expand...
Click to collapse
Try to enter the bootloader mode (power+light+reset). From what you have described it appears that you should not have problem entering the bootloader mode. Please remember that in bootloader mode yor screen is dark and only when you look very carefully you will be able to read the word "Serial" on the top of the screen and bootloader version number at the bottom. If there is inssuficient illumination in the room it is quite possible to think that the screen is blank. There will be no backlight. Once you are in the bootloader connect to your PC (before connecting please open Active sync on your PC uncheck the "Allow USB" connection in File / connection setting) Once connected the word "Serial" on the top of the screen will change to "USB". It is advisable to use only the original cable. Also connect the cable directly and not through a hub. Now reflash the rom and do a hard reset. I have faced problems by softreset after upgrade please try hard reset.
Hopefully your problem will be solved by a reflash.
Best of luck

From my past experience you have to flash to the original manufacturer rom first. Then you flash to whatever rom you want.
hope this helps

Thanks all, I'm now be able to re-flash the ROM and upgraded to WM6....
Here comes another issue... after i run the first setup and reset the PDA, it stuck on the Windows Mobile screen, any clue?
thanks again.

dopod900xxx said:
Thanks all, I'm now be able to re-flash the ROM and upgraded to WM6....
Here comes another issue... after i run the first setup and reset the PDA, it stuck on the Windows Mobile screen, any clue?
thanks again.
Click to expand...
Click to collapse
From the file link you have specified, http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip it seems that you are using Jwrightmcps' WM6 2.01.08 WWE Rom Release.
I too have lock-up problems but only during boot-up. The frequency of this happenning is about 30% and why it happens is still unknown since the lock-up happens at random stages during the booting sequence. The only solution that I know of for now is to simply do a soft-reset repeatedly until the device boots up properly.

nvatvani said:
From the file link you have specified, http://micmeo.com/UNI/WM6/900_WWE_20...0_wwe_ship.zip it seems that you are using Jwrightmcps' WM6 2.01.08 WWE Rom Release.
I too have lock-up problems but only during boot-up. The frequency of this happenning is about 30% and why it happens is still unknown since the lock-up happens at random stages during the booting sequence. The only solution that I know of for now is to simply do a soft-reset repeatedly until the device boots up properly.
Click to expand...
Click to collapse
This appears to be a common problem as seen from different posts. Thankfully things are ok after reset.

yes, after reset few times, it works... and everytime it hangs, need reset few times...

dopod900xxx said:
yes, after reset few times, it works... and everytime it hangs, need reset few times...
Click to expand...
Click to collapse
You might find this of interest - it refers to the problem of hanging after soft reset in the 2.01.08 WWE Rom:
jmallen said:
I had this problem also. I found pulling out the battery for 5 or more seconds solved this for me every time.
Give it a try. Good luck
Click to expand...
Click to collapse
It may be solved in later versions.

d_ranade said:
Try to enter the bootloader mode (power+light+reset). From what you have described it appears that you should not have problem entering the bootloader mode. Please remember that in bootloader mode yor screen is dark and only when you look very carefully you will be able to read the word "Serial" on the top of the screen and bootloader version number at the bottom. If there is inssuficient illumination in the room it is quite possible to think that the screen is blank. There will be no backlight. Once you are in the bootloader connect to your PC (before connecting please open Active sync on your PC uncheck the "Allow USB" connection in File / connection setting) Once connected the word "Serial" on the top of the screen will change to "USB". It is advisable to use only the original cable. Also connect the cable directly and not through a hub. Now reflash the rom and do a hard reset. I have faced problems by softreset after upgrade please try hard reset.
Hopefully your problem will be solved by a reflash.
Best of luck
Click to expand...
Click to collapse
boss ... please help me ..... i have a dopod 900 ..... but it can not enter bootloader or hard reset .... ditancap usb cable, charger lights flash .... Please help keep the boss. ... thank you

Welcome to forums
Have a read on my signature link, you´ll find a lot of interesting information to recovery your Universal.
Good luck,

flash with tomal roms

Welcome to forums
Tomal ROM´s are indeed fast and stable

manybe you can nmsm your original rom again

Try update bootloader to 1.01 _ttp://rom-update.ru/programs/dd48795954c166e9431f4127c130d474.exe

German Qtek 9000 CID unlocked, hardSPL'd
running MaxStegiROM
Tried to upload D-Two's ROM.
Everything went fine, upload 100%
then: upload error.
screen went black, no reset works
no USB or Serial to be read on dark screen.
Tried battery out (battery is charged), no reaction.
When connecting to PC the red charging LED lights up for
some minutes, then goes off.
PC says connected unknown device ain't working properly
(other Qteks are recognized properly)
Trying to re-flash gives connection error when pressing "update".
Any idea?

help please

my xdalls is dead ,i cannot hard or soft reset it,an orange light comes on when i put it in the cradle,the screen is black and says serial at the top and v 2.08 at the bottom ,could someone help me please ,i have read as much as i can but nothing seems to work tia

Use the SEARCH engine...there are several other posts like yours!

thanks
thanks for your time,it would be nice if you advised me what to search for ?among the many posts,after several diferent searches i am still empty handed ,being a newbie simply suggesting to search wasnt very helpful,thanks anyway

Try here to start:-
http://wiki.xda-developers.com/index.php?pagename=BlueangelFAQ
That page is full of links to help you out.
And then try here:-
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
If you don't understand it don't do it but its pretty straight forward.
People will help if you try things from there and then explain what is happening.

thanks for your help but nothing works
thank you so much for your reply,at least you have tried to adress my problem rather than just telling me to search (which i have already done)
I have previously checked out the posts you directed me to and either i am stupid and dont understand or my problem is different?Anyway what i see my problema as being is that i cannot perform a hard or soft reset by the usual methods ,also active sync dosnt pick up my device so i cannot install any operating system including my original version,i am trying not to believe that i have ruined my device because as a disabled pensioner i rely so much on it and cannot afford to replace it,i have spent hours aquiering the software that i need to help me with my disability and time spent in hospitalsd and waiting rooms,once again thank you for giving me some hope and i would appreciate any further advice

samuraijack said:
thank you so much for your reply,at least you have tried to adress my problem rather than just telling me to search (which i have already done)
I have previously checked out the posts you directed me to and either i am stupid and dont understand or my problem is different?Anyway what i see my problema as being is that i cannot perform a hard or soft reset by the usual methods ,also active sync dosnt pick up my device so i cannot install any operating system including my original version,i am trying not to believe that i have ruined my device because as a disabled pensioner i rely so much on it and cannot afford to replace it,i have spent hours aquiering the software that i need to help me with my disability and time spent in hospitalsd and waiting rooms,once again thank you for giving me some hope and i would appreciate any further advice
Click to expand...
Click to collapse
Unfortunately i do not have a blue angel so my attempts to help are limited but what i would suggest is to fully charge the pda overnight and then remove the battery for ten-twenty mins.
Then try and put it in bootloader mode (after you have reinserted the battery and turned it on).
If you can get this far attatch it to your usb (let any drivers install on their own on pc) and flash the same rom the handset came with.
Hope it helps

actually you are "IN" the bootloader mode... it's the UI for flashing.
Serial... means your USB cable isnt detecting any PC connection.
Orange led means you're phone is charging, that's a good sign.
try charging it for a long time and wait if it becomes green.
then if and when your battery is full...
take your battery out for at least 30-40 mins,
if your backup battery is old... and you know how fast it could drain out
you can use that time instead of the 30-40 mins...
put the battery back...
press and hold the record button + the power button...
now stick the reset.
use a separate synch cable.
then flash your phone again.
if that doesnt work...
search for MTTY...
i dont know the particulars but i think you'll find it somehow
Good luck!

1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001 (If you only see COM 1 and COM 2, try unplugging the USB and replugging it)
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted (only do this is if you dont mind losing all data on the BA)
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.

Thanks ,but no Luck
Thanks for your reply,but i cannot Choose WCEUSBSH001 when Run mtty.exe,i can choose Com 3 but when i type in your instructions it tells me to "Please input command name in menu Auto first" ARRGGGHHH! i am going crazt,but i realy appreciate yout time and effprt to my problem,it is wonderful to have some hope of getting it up and running as i am so lost without it,once again any help or suggestions appreciated

did you kill both process in task manager?
Have you tried to unplug the device wait ten seconds and then plug it back in?

RE:more thanks
i dont find the rapimgr.exe process running ,could that be the problem? thanks again ,really appreciate your time and efforts

kinda new to this myself mate but had a similar problem recently.
firstly, it sounds like your OS has gone....the screen you can see basically means there is nothing to 'boot' to.
'serial' should change to 'usb' once plugged into the pc before you can start active sync and reloading an OS.
try, if possible, a different usb port if that fails is there any chance you could borrow another cradle to check that the usb side is ok?.
another thing i did not see mentioned (may have missed it), if you push power + soft reset together and as soon as you see the boot loader press record + camera at the same time, if this works it will show 3 options, first one should remain 'no' the next 2 should be changed to 'yes', (record moves down the options, camera changes the setting) then press the 'mail' button.
this should clear the BA (losing any saved data etc) but might 'wake it up' so the pc will recognise it again and allow you to reload.
if it is showing 'serial' and charging then i doubt it is broken beyond repair, just one of those annoying problems that comes with technology.
i upgraded to WM6 with no problem, it was as i tried to downgrade back to 2003 i got my problems, it appeared as if i had wrecked my BA but re-read all help/instructions a few times and managed to get it sorted, dont give up hope, just keep going over it.....i am sure you will get there, good luck.

Given up
thanks for all your help ,after trying so many combinations ,i have given upo and sent it in to be repaired,i was wondering however if it is worth upgrading it to 6? and what the correct rom version is ,any help here would be apreciated ,and once again thanks for your time

No device Connected

Hello,
My HTC 3300 is blocked on Windows start screen.
I have hard reboot my device and un screen with 3 color appear.
When i plug my device with USB cable, my computer play a song to inform my device is well connected.
But when i launch Artemis USPL, a popup appear with the message : "No Device Connected : Would you like to try copying again ?" Yes, No, Cancel.
I'm blocked a this step.
Can you help me ?
Thx
PS: Sorry for my bad english. I'm french guy.

hi guys,
i have the same problem....
I was trying for the first time to upgrade my Artemis!!! I DIDN'T DO THAT!!!!
Please help me!
TNH

USPL only work if you are in WM. It doesn't work at the booloader.

Zecanilis said:
USPL only work if you are in WM. It doesn't work at the booloader.
Click to expand...
Click to collapse
yes... i know
i am reading.... i am looking for a solution.
I read on the POF USPL guide that probably (Unfortunately ) this problem should be caused by same PDAmobiz tool!!!!
i am being funny!!!

yet another bricked artemis owner
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….

zikizile said:
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
Click to expand...
Click to collapse
It solved my problem: I've played around with some dll's on my Artemis and it won't boot anymore.
Just one thing: you must type password BsaD5SeoA, cause it's case sensitive.
THANK YOU VERY MUCH!!!

Hi guys,
i fixed my problem!!!!!
i flashed an official ROM (1.12.405) using a SD card (512mb)
now i'm going to work with ARTEMIS_USPL!!!! WOOOOWWWW

owner of a brick called artemis
glad it helped you solve problem...
when I was young I use to poke with programming...
but that was looooong time ago (remember zx spectrum?48 kb ram..haha)now you got it in your pocket(working if you're lucky guy, not like me)
Any way, point is:
never give up!!!!

Yes, I agree with you: NEVER GIVE UP!!!!
I'd like to help you, i'm not expert people on this work...
I just read a lot of good indications on this forum.
Good Luck

Thanks man,
I'm trying to find another motherboard,before I start playing with this one.
Maybe you know where to get one for artemis?(arte 200)Or someone with broken screen not willing to repair it?
cheers,
z

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english