Develop Bugs

My BA (MDA III) is Dead ... any help to relife

hi all..
sorry for that... But i am really very sad this night..
my sad story is:
i was Reinstalling WWE rom version 1.40.00 for my device (MDA III), when the prossece reached 8% of progress the upgrading program gave me an error message (belive me i don't remember what it was) . after that the device dead and no response for any action i have triad with it
even when i was trying to do soft / hard reset or trying to access the bootloader mode.
all what i have now is a device with blank black screen for ever.
by the way: my device was in GER (german rom) language at the firest time i gut ,and i have upgraded it successfully since 3 months ago.
What can I do?
help me please, Any advice will be appreciated greatfulllllyyyyy..
thanks in advance..

Were you trying to install WM2005? If so try the WM2005 method of getting into bootloader:
Record + Camera + Power + Soft Reset.
If not...
My device once went completely dead and I later discovered the battery had shorted or something and was totally drained. So take out the battery and charge it SEPERATELY. Leave the device with no battery for at least an hour. Thisll do two things:
1) Give the battery a chance to charge up
2) Totally reset the device as the backup battery will depleat.
Leave it for a mimimum of an hour (longer if you can) then put the battery back in and try turning it on.
Hope this helps cos im just guessing really!
Lewis

i'll try :shock: ..then feedback you with the results...
thank you for your great response <Hero>

sorry .. I forgot to say .. i wasn't trying to install WM2005

BigDamHero
U R My hero .. i love U :wink:
happy news N Good result:
I got bootloader mode of my device ... really i got it..
But... whats the next step to make it works :shock: :shock:
sorry really i need your help

If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
If you use MaUpgradeUt_noID (download and instructions on WIKKI page above) then it should just be a double click.
Basically just follow the WIKKI page above.
Hope it works.

i am trying to upgrade my qtek 9000,but something is really bad,please help

hello
i am trying to install this rom : Helmi UNI AKU3.5 ROM
First i dont know if is normal,but it is installing really fast,the precentage is going up like 5-6% every 10-15 seconds,and then when it is succesfully finished i reboot the device(take out the battery) and i get nothing on the sceen,it just says "Serial" or if i put the usb cable it says "USB",what should i do?

please help guys, i have tryed to install like 5 different roms,and all it does is shows me that it has successfully updated and then all i see is "USB" on the sceen on the universal. what is happened?is my phone dammaged?

Yes tht norm, after its 100% dun dnt take the battery out? [who told u 2 do tht] hard reset ur uni thn wait.... enjot
I ment enjoy

man,read wiki! there is section for stucked on btloader screen
1: http://wiki.xda-developers.com/index.php?pagename=Instructions%20for%20those%20stuck%20on%20Boot%20Screen
2: http://wiki.xda-developers.com/index.php?pagename=Instructions%20for%20those%20stuck%20on%20Boot%20Screen%20%28UNI_exitbootloader
3. maybe U will need to upgrade btloader:
http://wiki.xda-developers.com/index.php?pagename=Upgrade%20bootloader%20from%201.00%20to%201.01

i installed the rom,it successfully upgrades,i do a hard reset,it asks me to press 0 for factory defaults or x to exit,whatever i press it goes back and says "serial" or if i connect the usb it says "USB",the mobile is not booting into the OS.

wow that was so scary,i just got the phone like 5 hours ago!!!it did get unstucked,i think i fixed it,i am haveing problems getting a signal now , lets see whats going to happen now...

go 2 phone settings and check if u've got correctly set gsm type(900/1800/1900) u may contact me thru icq 82511292

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Diamond rom error!

SOS!!! im not computer specialist so i made a mistake.... I used this ROM
Benko's Ultra Lite & Clean Windows Mobile 6.5.3 ROM , the full and prime version... I didnt make any hspl spl etc... Since then, Im not able to put our phone's old Rom because when it is syncrhonised and im trying to install the Rom, my phone disconects and it shows a Red, green blue, whit picture with this:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0X32
.....HELP MEEEE!!! :'(

you are in bootloader mode...you can flash any rom you want simply using the customRUU.exe included in the rom

can you please describe it step by step? im begging you and thank you for your reply....................

tasosruls said:
can you please describe it step by step? im begging you and thank you for your reply....................
Click to expand...
Click to collapse
restart the diamond from the red button under the stylus and hold the volume down.
the diamond will rise again with a screen with colored stripes, connect the USB cable and flash the rom

im trying to do it and it just goes on black screen, disconnects and then nothing..........................

Okay, download an official HTC rom for your device in the language it came with (look up wiki pages for diamond, you'll find them there).
Hook up your phone to your computer and since it is already in bootloader (the red/green/blue screen) just double click the file you just downloaded and follow the instructions on the screen.
Don't worry...your phone will be fine.
btw...your spl is 1.40.OliNex......that looks like unlocked to me (hardSPL)

reay? well i dont know... i bought from someone.... i'll let you know of how it goes.. thanks a lot!!!!!!

May i ask you another silly wuestion? How do I fsh a rom? because in all cases, the phone must be synchronised with the pc.. oh and my phone says"serial" in the white box..

tasosruls said:
May i ask you another silly wuestion? How do I fsh a rom? because in all cases, the phone must be synchronised with the pc.. oh and my phone says"serial" in the white box..
Click to expand...
Click to collapse
you can flash a rom connecting your phone through usb...then you should see usb instead of serial..then flash using the software you use abitually

it only writes serial... doesnt go to usb mode............. :

tasosruls said:
it only writes serial... doesnt go to usb mode............. :
Click to expand...
Click to collapse
this is strange..try to hard reset your phone...press soft reset then keep pressing volume down and center button till you see a grey screen then press volume up and you are done

well im such an idiot! all I had to do was to rename the nbh file to diamimg.nbh an di was renaming it to diaming! this is it! everything is fine! thanks for your time! god bless you all guys....!

Well, that's a more common critical typo then you might know....lol!
Glad it worked out for ya.

Touch Diamond won't boot ! ! !

I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!

atomheart said:
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
Click to expand...
Click to collapse
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.

ku9911 said:
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
Click to expand...
Click to collapse
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !

atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
no need to get back to 1.39 .. olinex 1.40 works fine. maybe just the rom is faulty when after reset+vol down+enter does the same error!
get onto boot loder (reset + vol down) when you get the "serial" label, plug in the usb, do the task 29 to format the phone, and get some other rom, and flash it with provided exe file.

atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba

mbiba said:
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
Click to expand...
Click to collapse
I am with Energy ROM 2.xxxx. I' ll try this right now.

260 error
it ' s give me error 206 (telephone not connected). How to instal whatever without a USB connection and ActiveSync? It doesn' t work> It' s stuck now on Starting Windows screen: Preparing for first use....."

Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)

atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
seems u did not read much before flashing. I guess you can easily solve the problem following Post2. You are doing Hard reset (reset+down+middle). It would not solve the problem. For new flash or mitty you have to go to boot loader screen (reset+down vol. key) (not the middle key). Also Active sync menu: file->connection settings, deselect 'Allow USB connection'.... then start flashing new rom (more details see Mitty or flash thread):
http://forum.xda-developers.com/showthread.php?t=540290
http://forum.xda-developers.com/showthread.php?t=416211
in simple english,
MITTY: for formatting ROM so that no old data will mess up with new rom (not always required but solves many wiered problems)
I once faced such problem , Mitty (once) and flashing rom (twice) solved the problem

HELICOPTER88 said:
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
Click to expand...
Click to collapse
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?

atomheart said:
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
Click to expand...
Click to collapse
I think currently the best is ralphusion J with only few bugs and issues.
Mbiba