My BA (MDA III) is Dead ... any help to relife - MDA III, XDA III, PDA2k, 9090 General

hi all..
sorry for that... But i am really very sad this night..
my sad story is:
i was Reinstalling WWE rom version 1.40.00 for my device (MDA III), when the prossece reached 8% of progress the upgrading program gave me an error message (belive me i don't remember what it was) . after that the device dead and no response for any action i have triad with it
even when i was trying to do soft / hard reset or trying to access the bootloader mode.
all what i have now is a device with blank black screen for ever.
by the way: my device was in GER (german rom) language at the firest time i gut ,and i have upgraded it successfully since 3 months ago.
What can I do?
help me please, Any advice will be appreciated greatfulllllyyyyy..
thanks in advance..

Were you trying to install WM2005? If so try the WM2005 method of getting into bootloader:
Record + Camera + Power + Soft Reset.
If not...
My device once went completely dead and I later discovered the battery had shorted or something and was totally drained. So take out the battery and charge it SEPERATELY. Leave the device with no battery for at least an hour. Thisll do two things:
1) Give the battery a chance to charge up
2) Totally reset the device as the backup battery will depleat.
Leave it for a mimimum of an hour (longer if you can) then put the battery back in and try turning it on.
Hope this helps cos im just guessing really!
Lewis

i'll try :shock: ..then feedback you with the results...
thank you for your great response <Hero>

sorry .. I forgot to say .. i wasn't trying to install WM2005

BigDamHero
U R My hero .. i love U :wink:
happy news N Good result:
I got bootloader mode of my device ... really i got it..
But... whats the next step to make it works :shock: :shock:
sorry really i need your help

If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
If you use MaUpgradeUt_noID (download and instructions on WIKKI page above) then it should just be a double click.
Basically just follow the WIKKI page above.
Hope it works.

Related

help ... xda exec won't start after rom flashing

somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back

i am trying to upgrade my qtek 9000,but something is really bad,please help

hello
i am trying to install this rom : Helmi UNI AKU3.5 ROM
First i dont know if is normal,but it is installing really fast,the precentage is going up like 5-6% every 10-15 seconds,and then when it is succesfully finished i reboot the device(take out the battery) and i get nothing on the sceen,it just says "Serial" or if i put the usb cable it says "USB",what should i do?
please help guys, i have tryed to install like 5 different roms,and all it does is shows me that it has successfully updated and then all i see is "USB" on the sceen on the universal. what is happened?is my phone dammaged?
Yes tht norm, after its 100% dun dnt take the battery out? [who told u 2 do tht] hard reset ur uni thn wait.... enjot
I ment enjoy
man,read wiki! there is section for stucked on btloader screen
1: http://wiki.xda-developers.com/index.php?pagename=Instructions%20for%20those%20stuck%20on%20Boot%20Screen
2: http://wiki.xda-developers.com/index.php?pagename=Instructions%20for%20those%20stuck%20on%20Boot%20Screen%20%28UNI_exitbootloader
3. maybe U will need to upgrade btloader:
http://wiki.xda-developers.com/index.php?pagename=Upgrade%20bootloader%20from%201.00%20to%201.01
i installed the rom,it successfully upgrades,i do a hard reset,it asks me to press 0 for factory defaults or x to exit,whatever i press it goes back and says "serial" or if i connect the usb it says "USB",the mobile is not booting into the OS.
wow that was so scary,i just got the phone like 5 hours ago!!!it did get unstucked,i think i fixed it,i am haveing problems getting a signal now , lets see whats going to happen now...
go 2 phone settings and check if u've got correctly set gsm type(900/1800/1900) u may contact me thru icq 82511292

Unable to boot up after upgrade ROM to WM6

I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0

Phone bricked during flash of roms??

Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm

Artemis P3300 more dead than alive (does not start)

Hi guys, looked a lot of threads on this forum but didn't see one similar to my situation!!!
My HTC P3300 Artemis is dead in a very strange way.
-Had it for a week with WM5(factory, german) - had no problem.
-After a week i've installed the WIN6.5WWV from Shady, from this forum - everything was ok the system worked fine (did the USPL unlock before installing)
-The device worked for around a week and yesterday just died while i started a ringtone from my additional flash of 8G SDHC within the device (had no problem with the flash before)
-A note - while on 6.5, the device had different issues with stability, had to restart once in a while.
Description of death :
1. Power button does not start the device(?!)
2. Trying to Hard reset (2 soft buttons + Reset with the stylus) - firstly i get a black screen that asks for confirmation, i press the green button to confirm. I see the text :
Format FAT partition
Format is completed!!
Then a WM logo appears on the screen with a red text in upper left corner:
IPL 1.12.0001
SPL 1.11.0000
And the phone freezes in this state.(?!) - does it mean the SPL is freezing? because before that i saw like 4 lines written with red, now only 2, the last being with SPL.
PS:
-Tried to take out the battery and repeat all steps, tried to put charger to make sure the power is constant (don;t ask, just tried .
-Tried to take off battery, wait for 20 minutes, then repeat
-Tried to take battery, wait for one night and repeat (actually i didn't wait, i just went to bad, it was night already
-Tried the bootloader mode (the Power+Voice+Reset)- it works fine, but don;t know if this helps.
What could be wrong? Is it a hardware issue? Very strange!!
Thanks for your time
Have a good one
maybe u can flash it again in bootloader? that could solve the problem?
if else, it looks like a hardware issue or the phone is bricked.
mvenneker said:
maybe u can flash it again in bootloader? that could solve the problem?
Click to expand...
Click to collapse
Yesterday I tried to install from flash like described here - and it was dieing all the time at "Reading from SD" - the screen was becoming bright white and it just shut down. (tried 4 times with same result, only that the moment when the screen went white was different - from 5 seconds to 2-3 minutes)
Right now, when i wanted to reply about this, i said to myself, let me try one more time!!! What do you think???? It worked!!!!
Reading from SD (1-2 minutes)--> Flashing OS (2-3 minutes) and after this it was DONE!!!!
Shuuuush!!! HTC is so weird!!!
Thanks for the help ) i think there are 2 logical ways to go next:
A) Just use it and hope it's gonna be all right in future
B) Install a generic WM not a cooked one. And maybe it's wize to downgrade to WM6.1 or WM6?
What do you recommand?
Have a good one!!
I'm so happy i fixed it!!
well u can safely use a cooked rom, if read a few topics that it can occur sometimes that a cooked rom isnt good flashed the first time. maybe that was the case with your phone, who knows

Categories

Resources