I've try to upgrade the v1640 (Qtek 9000 or i-mate jascar similar).
The software ma_upgrade... have been clearing the rom and then write the update rom.
When finisch disconnected the cable and then hard reset the pda to restore factory default.
The new rom dont start and the display appear serial.
How I can repair the rom?
Can Anyone help me to re-use the pda
Tnk
Look in the univeral forum...
Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd
yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.
Thanks for that. Time to give it a whirl! Wish me luck!!
Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.
Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd
I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either
Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.
The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F
question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.
Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F
Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!
Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!
Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.
SPL is 1.25.0000
IPL is 1.25.0001
Ideas??
The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.
OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??
fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.
I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.
my pocket pc is only usb v1.02 on screen, what can i do?
thank's
please help me,too
how do I hard reset ipaq 2750 with WM 6 installed ?
thanks
*edit*
solved my own problem, it use different method not hard reset but Clean Reset as for WM5 ( hold button calendar,message,power then reset )
sorry & thanks for the thread btw, doesnt mean to hijack the thread
hi
even i cooked my own rom and flashed it to my xda orbit.
but now i've got the problem the screens stucks at the first screen where the hints like IPL, SPL, GSM is.
i think its over with my phone. put out the battery and so on doesn't solve the problem.
what can i do now?
please help me
Make a hard reset or enter bootloader mode and reflash it again.
Thanks i could solve it
Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres
andres_lol said:
Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres
Click to expand...
Click to collapse
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo
Skoo said:
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo
Click to expand...
Click to collapse
Thanks mate, im doing right now