Develop Bugs

Desperate to do a hard reset

Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.

hard reset is usually done by holding in the top two inner (menu) buttons while pressing the soft reset button, let go the reset button first then when the warning comes on screen release the other 2. Then press call to start the reset process.

Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?

hard reset
You shold do:
Start>settings>system>clear storage> it is a hard reset too

Surely if the files on the phones memeory has been wiped the pressing the buttons on the handset will be pointless as there will be no programmes/commands linked to them
Sounds pretty serious to me

reset problem
Gift said:
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
Click to expand...
Click to collapse
Maybe you can try a reflash of the rom?

Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.

Gift said:
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Click to expand...
Click to collapse
AeronK 's solution should work fine.

Hard reset how do?
hallo
i have another problem..my XDA ist blocked(security code ist unknown, job of my soon..
when i making hard reset, then XDA in the screen has 3 collored thong with these nr"I PL 1.25.0001 and SPL 1.25.0000"
when i push volume button up or down, with reset button xda start normally but ask for code
What ??is this??
P.S.
and i must wait for acces to enter code 8 to 16 min
Regards for All
Arthur

Ok, seems that the only way is to do a refash of the rom.
How do I make that?
Please help
Thanks.
PS: In the process I hope not to use the active sync, because it doesn't work in my computer

dude i guess you need to reflash the rom
yes you need active synch to run uspl which you need before you flash/reflash a rom
your alternatives
use SD flashing read about it in wiki xda developers i never used it but its there
all the best sincere wishes to recover your pda

Gift said:
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
Click to expand...
Click to collapse
just another two thoughts are you aware that if you hold the power button the phone restart it like soft reset!! so i guess you may want to try this b4 anything else i mean hold the two soft buttons & attempt reset via power!!
you may also want to try a programme called IBE Tweaks it has HARD RESET feature built in it!!
let us know how things go

Reflash the rom & dont forget to run a uspl first

After several attempts finally I managed to do the hard reset using the buttons, and my pda is work fine again
In any way, I will try your indications to prevent futures problems.
Thanks jahrami, you have been very useful.

U most welcome so glad u got ur phone back
Congratulations

Problem with Loox N500 ROM's

HI all
this is my 1st post and i have realy big problem with mine loox N500. i try to upgrade to WM6 and something goes wrong and after the reset of the pda o see this:
PLS help me. I do a reset and hard reset i try to instal a diffrent ROM and nothing

How to unbrick a daxian t32

i hope i`m in not in the wrong forum i just wanna know if there is anyone who knows how to unbrick the daxian t32 the probleme is after a hard reset the phone doesn`t boot i mean it satys in the blue screen and doesn`t move to the windows mobile green screen....if anyone familliar with this plz help thnx .....

I'm currently having the same problem with mine,and I can't seem to find a way around it...I'm going to have to take advantage of the warrenty and send it back to the manufacture.

Hard Reset to unbrick
Press the reset hole and press the two side buttons above.
Keep those two buttons pressed until the system perform a hard reset.
Doing so again as it left the factory.
More sorry my english is not very good.

I bricked my Diamond

Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres

andres_lol said:
Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres
Click to expand...
Click to collapse
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo

Skoo said:
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo
Click to expand...
Click to collapse
Thanks mate, im doing right now

Urgent Help Needed: Diamond stock on the loading screen

Hi all,
Wonder if anyone may give me a hand on my issue.
About two weeks ago, my diamond started freezing on the loading screen, and cannot enter into the wm from there on.
Wonder if anyone can provide some advice on this issue?
I was thinking to do a rom flash, but not a spl flash, wonder would that solve the problem?
Would greatly appreciate if anyone may provide a helping hand!
Thanks!

But your screen it's broken or just freeze?
Because if freeze, probably, it's your hard spl
if it's broken the screen you must download mymobiler, for use phone with PC

i had the same problem but this worked for me:
press both volume buttons and then hit reset, this will allow u to enter the bootlader mode
now connect ur precious diamond to a pc and ur ready to flash a new rom

its js a freeze, first time it happened.
I know this sounds quite noob, but greatly appreciate if someone may explain the procedure of flashing the hard spl for me.
I think it is the hard spl problem too, from consulting with some ppl.
Thanks for your help!

thanks for your advice blackjag,
but without going into wm, i can still sync the rom in from the bootloader from my pc?
Greatly appreciate your help. A bit new at this, so please dont mind that I am a noob and that the questions are stupid.
Thanks!

You can enter in bootloader with vol down + reset.
For flash hard SPL and new rom You must read xda diamond main page
;-)