Related
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
hard reset is usually done by holding in the top two inner (menu) buttons while pressing the soft reset button, let go the reset button first then when the warning comes on screen release the other 2. Then press call to start the reset process.
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
hard reset
You shold do:
Start>settings>system>clear storage> it is a hard reset too
Surely if the files on the phones memeory has been wiped the pressing the buttons on the handset will be pointless as there will be no programmes/commands linked to them
Sounds pretty serious to me
reset problem
Gift said:
Thank you for the answer.
The problem is the soft reset button doesn't work.
Is there other way to do the hard reset?
Click to expand...
Click to collapse
Maybe you can try a reflash of the rom?
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Gift said:
Thank you.
It seems that I have a serious problem.
If somebody know another way of doing the hard reset, please inform.
Click to expand...
Click to collapse
AeronK 's solution should work fine.
Hard reset how do?
hallo
i have another problem..my XDA ist blocked(security code ist unknown, job of my soon..
when i making hard reset, then XDA in the screen has 3 collored thong with these nr"I PL 1.25.0001 and SPL 1.25.0000"
when i push volume button up or down, with reset button xda start normally but ask for code
What ??is this??
P.S.
and i must wait for acces to enter code 8 to 16 min
Regards for All
Arthur
Ok, seems that the only way is to do a refash of the rom.
How do I make that?
Please help
Thanks.
PS: In the process I hope not to use the active sync, because it doesn't work in my computer
dude i guess you need to reflash the rom
yes you need active synch to run uspl which you need before you flash/reflash a rom
your alternatives
use SD flashing read about it in wiki xda developers i never used it but its there
all the best sincere wishes to recover your pda
Gift said:
Excuse my poor writing English.
I was cleanig my sd card whith sk tools program, and I made a mistake and clean all files from main memory.
Now I don't have access to the programs, and the soft reset and the camaras buttons don't work.
How can I do a hard reset in these circumstances?
Please help. I really need the phone working.
Thanks.
Click to expand...
Click to collapse
just another two thoughts are you aware that if you hold the power button the phone restart it like soft reset!! so i guess you may want to try this b4 anything else i mean hold the two soft buttons & attempt reset via power!!
you may also want to try a programme called IBE Tweaks it has HARD RESET feature built in it!!
let us know how things go
Reflash the rom & dont forget to run a uspl first
After several attempts finally I managed to do the hard reset using the buttons, and my pda is work fine again
In any way, I will try your indications to prevent futures problems.
Thanks jahrami, you have been very useful.
U most welcome so glad u got ur phone back
Congratulations
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.
I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.
SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help
Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...
jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?
SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.
Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:
I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
hossamha said:
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
Click to expand...
Click to collapse
try holding the camera button, the power button, and poking the reset hole? if this does anything...thats good. from there hopefully you can reflash the hard spl.
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
hossamha said:
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
Click to expand...
Click to collapse
well, im sorry to say that i do not know near enough about this kind of thing to help you out here - im mostly a beginner myself.
CAN ANYONE ELSE HELP HERE?
so quick question, you are aware that while in the bootloader, the pc does not have to really..RECOGNIZE it...right? as in...active sync will not know its there, and its not going to show up in my computer? but the RUU should recognize it. have you just...tried it?
Dear all,
I got brand new HTC Touch Pro2 T7373 that is not locked.
The phone is DEAD and does not boot.
I tried vol+ and pressing power on.
The phone green led goes on.. and stays like that forever.
How is the recovery procedure?
I have done recovery procedure on my old HTC P3300 several times, but with this one, no success. Any help? Thanks in advance. (also I need original rom with english language if it is possible, please post a link.) Thanks again.
You ****ed it up. YOu tried a hardspl from a different device... BAD IDEA!! Sorry but you're screwed return your Touch Pro 2 to where you bought it from and see if you can get a new one but otherwise you're screwed
digitalmk said:
Dear all,
I got brand new HTC Touch Pro2 T7373 that is not locked.
I tried several times to change the firmware from German to WWE, because I do not understand German, but without success.
Then I applied raphael_cdma_vzw_hspl_035.rar because it does not accepted any other wwe firmware that I wanted to put on.
After that, the phone is DEAD and does not boot.
I tried vol+ vol- and reset the same time, and pressing power on.
The phone green led will bo on.. and stays like that forever.
How is the recovery procedure?
I have done recovery procedure on my old HTC P3300 several times, but with this one, no success. Any help? Thanks in advance. (also I need original rom with english language if it is possible, please post a link.) Thanks again
Click to expand...
Click to collapse
you should have PM'd me for language change services.
now, your bootloader is probably dead if voldown+reset didn't work...
maybe the radio bootloader is still alive, but it would be quite difficult to unbrick it (requiring hardware tools) even if so.
You should consult the experts here before you try anything first, that is why we are here.
Dude! this a very expensive phone... handle with caution.
Now your phone.....RIP!.
Dear Cmonex, one question, as I have found, vol up + vol down + reset btn and then press power. Is this the way for entering the emergency mode, or it is something else (like you wrote... vol down + reset ) ???? maybee I do not enter the recovery mode correctly ???
Thanks for quick reply Cmonex , but thanks all also!!!
digitalmk said:
Dear Cmonex, one question, as I have found, vol up + vol down + reset btn and then press power. Is this the way for entering the emergency mode, or it is something else (like you wrote... vol down + reset ) ???? maybee I do not enter the recovery mode correctly ???
Thanks for quick reply Cmonex , but thanks all also!!!
Click to expand...
Click to collapse
As Cmonex wrote,
Hold Vol Down (keep it pressed) and press the reset with the stylus.
This should take you to the tri-colour bootloader screen.
If it doesn't you have bricked your expensive device, the only way to recover is to get a new bootloader loaded via JTag, good luck getting someone to do that for you.
As is always stated here time and time again, read the information carefuly and if you don't understand ask.
Since you flashed a Raphael bootloader or rom or both ???? I'd say it's well and truly an expensive paper weight sir............ on the bright side though, you've learn't an extremely valuable lesson.
READ BEFORE YOU ACT.
Beasty
Dear Beasty,
Thanks for the complete info.
I will try tomorrow morning first thing to enter vol down + reset, and try to upload new firmware. If it does fail, please give me info for Jtag pinouts. I have done until now flashing with jtag interface to satelite receivers, to linksys rooters but never to phones. However, I think that it will be similar because Jtag is Jtag . Please give me info about the Jtag if you have just for me to be prepared for tomorrow fight . Thanks. Regards.
What I want to know is why did the TP2 stock SPL allow digitalmk to flash an unsigned SPL (ie HardSPL)?
Are the SoftSPL hooks that close between the 2 phones?
digitalmk said:
Dear Beasty,
Please give me info about the Jtag if you have just for me to be prepared for tomorrow fight . Thanks. Regards.
Click to expand...
Click to collapse
I dont think any one here knows where the jtag pins are on this phone. You could always strip the phone down and be the first to know where the jtag pins/pads are...
wootty2000 said:
What I want to know is why did the TP2 stock SPL allow digitalmk to flash an unsigned SPL (ie HardSPL)?
Are the SoftSPL hooks that close between the 2 phones?
Click to expand...
Click to collapse
probably just running SSPL bricked it.
(my newer SSPLs have a device model check but the cdma raphael package which he ran didn't have it)
I did something similar with my HTC Tornado a few years ago,
It was a lost cause, and I feel you are going to find the same.
its an expensive lesson to learn
Obviously, technically speaking you have voided your warranty... so you have a few options left:
Send device back to htc and play dumb *** not recomended could be classed as fraud?***
Find the Jtag pin outs and a method of flashing
purchase a new system board from ebay
break down the device and sell the parts on ebay
Cheers
Steve
digitalmk said:
Dear Beasty,
Thanks for the complete info.
I will try tomorrow morning first thing to enter vol down + reset, and try to upload new firmware. If it does fail, please give me info for Jtag pinouts. I have done until now flashing with jtag interface to satelite receivers, to linksys rooters but never to phones. However, I think that it will be similar because Jtag is Jtag . Please give me info about the Jtag if you have just for me to be prepared for tomorrow fight . Thanks. Regards.
Click to expand...
Click to collapse
Sorry I don't know the jtag pinouts and I don't believe anyone else has mapped them out as yet.
Cheers,
Beasty
JTAG not easy probably
I was looking a while back for the Titan JTAG points because I also have used it a lot on other devices and someone sent me one he had killed. What I found by looking around surprised me that there appear to be no JTAG at least not in the Titan that are lined up. Someone on another model did it long ago but looking at taking the processor off the board to get to some pads below to do it, made me give it up.
with vol up + reset + power on, it starts green led
My phone is dead, I tried to hold vol down and press reset, but nothing..
BUT WHEN HOLDING VOL UP + CLICKING ON POWER ON, IT Lights green led (left from speaker) and keeps lighting.
When press reset + anything (vol down + reset ) or anything led goes off and does not start. This tells that it is not completely dead .. but.. where from here ??
Any help from here??
Regards to all
It is pretty much dead unless you can find the JTAG pin outs. No other options aside from getting a new one.
I suggest you return your TP2 and "play dumb"..
Wap in in the microwave for half a second. Frys everything. Play dumb.
digitalmk said:
My phone is dead, I tried to hold vol down and press reset, but nothing..
BUT WHEN HOLDING VOL UP + CLICKING ON POWER ON, IT Lights green led (left from speaker) and keeps lighting.
When press reset + anything (vol down + reset ) or anything led goes off and does not start. This tells that it is not completely dead .. but.. where from here ??
Any help from here??
Regards to all
Click to expand...
Click to collapse
maybe radio bootloader still works but you'd need to build a serial cable to access it and even then it's not an easy ticket to unbricking
hit it with 12+ volts at the battery terminals, should fry everything and it won't look like you stuck it in the microwave. Say "I think there was something wrong with my charger".......
Are you Dutch, digitalmk? I ask because two different Dutch posters bricked their gsm Raphaels this week flashing that same verizon hard spl. It seems weird as hell that so many people are doing that all of a sudden. Where did you get the idea to flash it?
Hi,
My phone became dead too. It worked normaly, but while i was talking he simply turn off. I thought that is empty battery, but he was on charger for few hours. Red light is on ( when charging), when i try to turn it on he vibrate and get to HTC Touch Pro 2 logo with red numbers in right corner and then go again off.
Does anyone know what maybe be a problem?
Hi all,
Wonder if anyone could give me a hand. My messaging function went into white screen, cant type or send message out.
I did a reboot a while ago because the phone froze on the wm screen. It chucked my spl back to 1.37. Wonder if anyone could give me a hand to let me know how to deal with this problem?
Do i need to hardflash my spl first?
Thanks.
tchiuhangng said:
Hi all,
Wonder if anyone could give me a hand. My messaging function went into white screen, cant type or send message out.
I did a reboot a while ago because the phone froze on the wm screen. It chucked my spl back to 1.37. Wonder if anyone could give me a hand to let me know how to deal with this problem?
Do i need to hardflash my spl first?
Thanks.
Click to expand...
Click to collapse
.
could you be a bit more specific? have you tried soft-resetting the device since it had this problem? if so you may need to hard-reset the device
not sure why, i tried hitting down vol + reset for a soft reset.
Went into the bootloader, but froze. Only said serial.
I am wondering do i need to hard flash the device first -.-"
Would be great if i get some help from someone.
Thanks!