Related
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
try putting your phone into the bootloader screen and reflash with another rom.
I have a friend that had this problem with his phone. In his case there was a problem with the pagepool, installing a different rom as cobbs stated was the solution for him as well.
FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
some of us have had this problem already - my advice- use tbe search function 'cmd task 29' is the answer
Hi Gort
Thanks for the wonderfull advise.
I already thought my phone was a gonner, but now I can work with it again.
For all the people who experience a phone that keeps hard resetting more often and eventually cant boot at all, here's what to do.
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
5. Now, run mtty1_1_.42_538 on PC.
6. If you have run mtty1_1_.42_538, just press the button USB
7. Type CMD
8. Type task 29 and let the program do his work a bit.
9. after that, flash with the rom of your choice
here is the link to mtty1_1_.42_538
http://forum.xda-developers.com/showthread.php?t=490182&page=4
Thanks for all the help guys, most appreciated
and hopefully this thread will help others now as well
edit: Link updated, should work fine now
problem flashing
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
brightman said:
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3451487&postcount=41
Hi all,
Wonder if anyone may give me a hand on my issue.
About two weeks ago, my diamond started freezing on the loading screen, and cannot enter into the wm from there on.
Wonder if anyone can provide some advice on this issue?
I was thinking to do a rom flash, but not a spl flash, wonder would that solve the problem?
Would greatly appreciate if anyone may provide a helping hand!
Thanks!
But your screen it's broken or just freeze?
Because if freeze, probably, it's your hard spl
if it's broken the screen you must download mymobiler, for use phone with PC
i had the same problem but this worked for me:
press both volume buttons and then hit reset, this will allow u to enter the bootlader mode
now connect ur precious diamond to a pc and ur ready to flash a new rom
its js a freeze, first time it happened.
I know this sounds quite noob, but greatly appreciate if someone may explain the procedure of flashing the hard spl for me.
I think it is the hard spl problem too, from consulting with some ppl.
Thanks for your help!
thanks for your advice blackjag,
but without going into wm, i can still sync the rom in from the bootloader from my pc?
Greatly appreciate your help. A bit new at this, so please dont mind that I am a noob and that the questions are stupid.
Thanks!
You can enter in bootloader with vol down + reset.
For flash hard SPL and new rom You must read xda diamond main page
;-)
I have flashed my at&t tilt 2 with core cell evo v1.2 & it was working fine for awhile but now my screen is just black i can hear the phone make sounds and all but can't see the screen at all i really need help fixing this as this is the only phone i have any help or suggestions will be greatly appreciated thanks in advance.
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
heres a link to a potential problem solver. Try to stay away from CHT lock and auto update apps!
sagarc88 said:
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
Click to expand...
Click to collapse
yes i have done both and after the phone reboots i can hear sounds but i am still unable to see anything on the screen
Edit - I take that back, if it's still not working after a reboot
Have you tried entering the bootloader and re-flashing with the stock ROM?
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
steviewevie said:
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
Click to expand...
Click to collapse
i can't even tell if i can enter the bootloader screen because i can't see anything on the screen is there any way to tell if it's in the bootloader screen without being able to see the screen at all & if i do have a hardware problem (screen failure) how can i put stock spl & stock rom back on the phone to get it serviced
steviewevie said:
Edit - I take that back, if it's still not working after a reboot
Click to expand...
Click to collapse
if its still not working after a reboot then what? please help me i need a solution to fix this because if i can't even fix this how can i even send it in to get fixed i won't be able to because it has been flashed & has hardspl on it
"PLEASE HELP"
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
steviewevie said:
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
Click to expand...
Click to collapse
how can i flash anything if i can't see the screen?
Doo Doo said:
how can i flash anything if i can't see the scrren?
Click to expand...
Click to collapse
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
steviewevie said:
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
Click to expand...
Click to collapse
man i really need to fix this maybe you can ask around for me since i'm new here & really don't know anybody on this board
I know it's frustrating, I'd be kinda worried if I had an apparently-non-working screen too. But please be patient, and wait for more people to see your posting. The folks in the US will be coming online around this sort of time, so there will be more people looking in and hopefully someone can help further.
Flash without seeing the screen
Enter boot loader even if you can not see the screen. You can flash your phone to stock then enter boot loader again and hard spl. I had a similar situation and was able to complete the process and warranty repair with AT&T no problems, or you can pay to have it fixed at an outside shop. I was quoted 150 and refused to spend that muck so I flashed the phone without seeing the screen...
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Russ741 said:
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Click to expand...
Click to collapse
well when i plug my phone to the computer activesync is not popping up what can i do to get activesync to recognize my phone
can somebody please help me i need to reflash my phone but i am unable to see anything on my screen when i plug it up to my computer activesync is not working so what can i do please i really need help with this
Flashing witout screen
Step 1
Enter boot loader mode (* Remove the back cover from the phone.
* Hold the Volume Down button.
* Use the stylus to press the reset hole.
* Or if the device was powered off, press the power button whilst holding down the Volume Down button.)
and attach to computer. (wait 30 to 60 seconds)
Step 2
Check device manager for HTC mobile sync under mobile devices.(Active sync will not work in boot loader mode)
Step 3
Flash using Rhodium CustomRUU on your PC. (use original ROM from At&T.
Step 4 repeat for Radio
Step 5 Use Stock_SPL_Restore_087.zip from http://forum.xda-developers.com/showthread.php?t=550131 repeat the process with it.
This should work it did for me. Let me know if you run into problems.
Hi I have and IMATE PDA2k EVDO and I tried a d-two rom and I now have the device sitting on the 4 color screen every time I reset it. Any idea how I reset it back to defaults so I can load another image onto it, I have the original image. any advice would be appreciated.
Thanks,
Actually I just fixed it.
Anyone know of any WM5,6 or 6.5 roms that work on this phone. The EVDO network is dead here in Australia so I just want to convert it into a PDA.
For the love of God... if you are going to make a thread saying "Hey guys, I broke this, how do I fix it?" Do not EVER update with "I fixed it!" without telling us HOW you fixed it.
I thought it was such simple fix it did not requiere explaination. To enter the bootloader you do the following
Press Power + record (above the volume slider) + softreset at the same time.
This puts it into the load mode so you can reflash.
problem with my xda iis
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
about WM 6 rom, maybe you can look at ftp://ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/
or at http://shipped-roms.com/index.php?category=windows mobile&model=Blue Angel
try to flashing rom again
You sir are an idiot.
A Blue Angel rom will not work for a Harrier.
So delete your comment because some other idiot will follow your bad instructions then **** up their phone and make another idiotic post.
Yea so did anyone figure out this whole problem with the white boot loader screen? I'm no where near a programmer or anything but I think my boot loader version is out dated. My HARRIER, not blue angel, is stuck at a white screen that reads Serial(USB when connected to usb of course) and v1.02. I've had a Harrier before this and it had the four color screen for boot loader. Am I on to something here?
Oh btw I already tried to reflash the rom over and over but updater keeps saying it can't connect.
jayreyes_31 said:
hi nid help... i followed the instruction on how to upgrade my ppc but it seems that the download link for win 6 does not exist anymore and now im stock in the boot loader i think the screen only shows "serial and below shows v2.07" i cant use my phone anymore i tried to reset it and emove the battery but stil it only shows serial... hope you can help me guys tnx...godbless
Click to expand...
Click to collapse
I have the same problem, anyone found a fix?
yes I have too same problem..plz help
i have a problem
Obviously.
But which one?
Tell us as elaborate as possible.
Problems Blue Angel Harrier Alpine
B-44 said:
Obviously.
But which one?
Tell us as elaborate as possible.
Click to expand...
Click to collapse
Please be careful: This is a Blue Angel (BA) Thread!
As Hima and Alpine Fora are closed, i will try to help as well as possible,
but please post marked "off topic"- hope moderators won't intervene...
And always first work out which device you're talking about.
Still love Alpine...
@admin: I know it's quite impossible to keep all these legacy threads alive- but what about some rescue thread, e.g. for non-touch-screen-phones,the Hima-BA-Family?
As i know from Siemens/BenQ Phones, it has gone silent around here, but from time to time some collectors appear which shouildn't be left alone.