Develop Bugs

Can someone help me with SX66

guys i need some help with my sx 66, after doing a soft reset it never came back on. I doesnt even connect to pc using cradle. once i hit the power button it comes the bootup screen and get stuck there. Can some plz help me with this problem

Have you tried a hard reset? Hope you've made a backup :wink:

Have you tried a hard reset? Hope you've made a backup :wink:

reset
yeah i tired hard reset too, but it still doesnt work.....

take the battery off and leave of for about an hour or so, so the back up battery completely runs dry... then try again.

i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????

at this point in time i say you opt for the warranty

daonly said:
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
Click to expand...
Click to collapse
BigDamHero said:
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
Click to expand...
Click to collapse
When you get to the Bootloader screen, probably you are home free. Just use the above link to resolve you problem.
If it doesn't work, let me know as I need some parts for mine and may be interested in buying yours for the parts.

HELP Please

I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?

Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.

I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.

SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help

Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...

jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?

SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.

Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:

I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Help Please!!!

I have flashed my at&t tilt 2 with core cell evo v1.2 & it was working fine for awhile but now my screen is just black i can hear the phone make sounds and all but can't see the screen at all i really need help fixing this as this is the only phone i have any help or suggestions will be greatly appreciated thanks in advance.

i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
heres a link to a potential problem solver. Try to stay away from CHT lock and auto update apps!

sagarc88 said:
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
Click to expand...
Click to collapse
yes i have done both and after the phone reboots i can hear sounds but i am still unable to see anything on the screen

Edit - I take that back, if it's still not working after a reboot

Have you tried entering the bootloader and re-flashing with the stock ROM?

If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).

steviewevie said:
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
Click to expand...
Click to collapse
i can't even tell if i can enter the bootloader screen because i can't see anything on the screen is there any way to tell if it's in the bootloader screen without being able to see the screen at all & if i do have a hardware problem (screen failure) how can i put stock spl & stock rom back on the phone to get it serviced

steviewevie said:
Edit - I take that back, if it's still not working after a reboot
Click to expand...
Click to collapse
if its still not working after a reboot then what? please help me i need a solution to fix this because if i can't even fix this how can i even send it in to get fixed i won't be able to because it has been flashed & has hardspl on it
"PLEASE HELP"

It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.

steviewevie said:
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
Click to expand...
Click to collapse
how can i flash anything if i can't see the screen?

Doo Doo said:
how can i flash anything if i can't see the scrren?
Click to expand...
Click to collapse
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?

steviewevie said:
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
Click to expand...
Click to collapse
man i really need to fix this maybe you can ask around for me since i'm new here & really don't know anybody on this board

I know it's frustrating, I'd be kinda worried if I had an apparently-non-working screen too. But please be patient, and wait for more people to see your posting. The folks in the US will be coming online around this sort of time, so there will be more people looking in and hopefully someone can help further.

Flash without seeing the screen
Enter boot loader even if you can not see the screen. You can flash your phone to stock then enter boot loader again and hard spl. I had a similar situation and was able to complete the process and warranty repair with AT&T no problems, or you can pay to have it fixed at an outside shop. I was quoted 150 and refused to spend that muck so I flashed the phone without seeing the screen...

I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ

Russ741 said:
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Click to expand...
Click to collapse
well when i plug my phone to the computer activesync is not popping up what can i do to get activesync to recognize my phone

can somebody please help me i need to reflash my phone but i am unable to see anything on my screen when i plug it up to my computer activesync is not working so what can i do please i really need help with this

Flashing witout screen
Step 1
Enter boot loader mode (* Remove the back cover from the phone.
* Hold the Volume Down button.
* Use the stylus to press the reset hole.
* Or if the device was powered off, press the power button whilst holding down the Volume Down button.)
and attach to computer. (wait 30 to 60 seconds)
Step 2
Check device manager for HTC mobile sync under mobile devices.(Active sync will not work in boot loader mode)
Step 3
Flash using Rhodium CustomRUU on your PC. (use original ROM from At&T.
Step 4 repeat for Radio
Step 5 Use Stock_SPL_Restore_087.zip from http://forum.xda-developers.com/showthread.php?t=550131 repeat the process with it.
This should work it did for me. Let me know if you run into problems.

issues with bootloader

Hey i hope all is good.
I really need your help. I have a TILT 2 cell phone and by mistake a friend activated the bootloader. Previously the ROM has been updated. the phone got stuck in that screen and the only way to turn it off is removing the battery. so, i try to reboot the phone and it only loads the bootloader with a flash message saying "no image file". ok, i though, the ROM was damaged and after reading a lot in the forums, i followed the instruction to put a new ROM. I connected the phone the the computer and the message in the phone changed to USB and my PC installed the HTC USB Sync driver (but Active Sync does not detect the phone); anyways, i ran the task 29 and a new rom. I was able to see the progress bar in both (PC and Phone) but then the phone reboots and loads again the bootloader. I tried to use the HARD SPL 1.00 as well but it does the same thing after finishing the flash it loads again the bootloader.
can some help me pls?? i'm new in this and the phone is a work tool for me i really need your help.
rgds

You should do the HSPL before flashing a ROM (unless it was already done).
I would try to flash the newest HSPL, then a ROM.

Hi, and thank you for you reply.
I already did it and apparently it flashed the HSPL . Now in the bootloader says SPL 0.85 OliMex; then i flashed the ROM and it showed me the progress bar in both system (PC and phone) but when it finish it booted back to the bootloader. I just noticed that sometimes (after been off for a while) if i turn it on it boots to the rom but it happens randomly and if I turn it back off i just got the bootloader again.
I really need your help pls

jsolanon said:
Hi, and thank you for you reply.
I already did it and apparently it flashed the HSPL . Now in the bootloader says SPL 0.85 OliMex; then i flashed the ROM and it showed me the progress bar in both system (PC and phone) but when it finish it booted back to the bootloader. I just noticed that sometimes (after been off for a while) if i turn it on it boots to the rom but it happens randomly and if I turn it back off i just got the bootloader again.
I really need your help pls
Click to expand...
Click to collapse
Hrm, have you tried doing a task29? Re-flash the ROM after task29.

yes already tried the task 29 and then flash the rom but the same issue...i've been reading a lot of post regarding issue with the bootloader and follow the instruction but nothing seems to work. I even tried the update from the AT&T site but the same issue...i have no idea what else to do

jsolanon said:
yes already tried the task 29 and then flash the rom but the same issue...i've been reading a lot of post regarding issue with the bootloader and follow the instruction but nothing seems to work. I even tried the update from the AT&T site but the same issue...i have no idea what else to do
Click to expand...
Click to collapse
So you've flashed the stock ROM? Have you tried relocking? Probably won't do much, but worth a shot I guess.
When you flash back to stock you flash the stock ROM, then relock, then reflash stock.

Yes, but the issue persisted.
I have noticed something. If i leave the cell phone turn off for a while (hours) and then i turn it on. Most of the time it works and all the things are fin; but as soon as i turn it off and turn it back on the bootloader starts appearing.
So, now i can use the cell but i cannot turn it off or leave the battery died on me...any suggestions?
BTW, thank you very much for your help

jsolanon said:
Yes, but the issue persisted.
I have noticed something. If i leave the cell phone turn off for a while (hours) and then i turn it on. Most of the time it works and all the things are fin; but as soon as i turn it off and turn it back on the bootloader starts appearing.
So, now i can use the cell but i cannot turn it off or leave the battery died on me...any suggestions?
BTW, thank you very much for your help
Click to expand...
Click to collapse
My phone is never turned off. I'm not sure what else to suggest, you've tried seemingly every step that could remedy this problem. Radio firmware probably won't help, but it shouldn't hurt either - you could try a new radio...

hi , this happened to me, solved it by reloading the rom again via sd, once it finish maybe you will see the bootloader screen again, so with stylus pres the reset buttom a few times until the rom boot , this can take several times to make it boot. after revive your cell , do a task29 then reload the rom again then do a hard reset, this happened to my 2 times, and its still alive ,good luck.

Same Problem
Hi,
I'm having the same problem. Installed the latest official ROM from HTC/ATT (gorgeous), and same problem after install. Whenever you try to reboot, it gets stuck in the bootloader screen. The last 50 tries it will not reboot at all, even after removing the battery and hitting the power button. This used to work occasionally.
Any other process anyone knows for getting the device to read the ROM?
Is the phone just worn out?

I suggest you reflash the shipped rom to your device and after the flash finishes and your device begins to boot immediately remove the battery to turn it off before it boots. Then replace the battery and press and hold the Send and End keys and while holding them down press the Power button and follow the instructions to factory reset(hard reset).