Related
guys i need some help with my sx 66, after doing a soft reset it never came back on. I doesnt even connect to pc using cradle. once i hit the power button it comes the bootup screen and get stuck there. Can some plz help me with this problem
Have you tried a hard reset? Hope you've made a backup :wink:
Have you tried a hard reset? Hope you've made a backup :wink:
reset
yeah i tired hard reset too, but it still doesnt work.....
take the battery off and leave of for about an hour or so, so the back up battery completely runs dry... then try again.
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
at this point in time i say you opt for the warranty
daonly said:
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
Click to expand...
Click to collapse
BigDamHero said:
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
Click to expand...
Click to collapse
When you get to the Bootloader screen, probably you are home free. Just use the above link to resolve you problem.
If it doesn't work, let me know as I need some parts for mine and may be interested in buying yours for the parts.
Hi i just had my Artemis back from tmobile, i had bricked it by updating rom..
so now is my question can you backup your ROm?
So if i brick it i can replace it ?
Mt
44 views still no solution...
let me give you a good advise!! many people used those coocked roms and ended with a bricked or non functional device included me!
i did a back up of my rom and restore it after i had so much troubles with wm6!! now i send it to t-mobile for reparation and hope they will help me because i unlocked my artemis.
@lommer you still have problems after restoring the original ROM?
drkbg said:
@lommer you still have problems after restoring the original ROM?
Click to expand...
Click to collapse
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
lommer said:
yes, thats why i send it to t-mobile for repair , it is 1 week ago and i'm still waiting. i will let you know when i get it back to see if the problem in the software or hardware is. my problem was that my device turns off everytime.
Click to expand...
Click to collapse
i dont think that has anuthing to do with the ROM..
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Flower said:
I have may be similar problem. I tried to unlock my htc p3300.
After doing the procedure there was an instuction to hard reset it.
When did that, my device just blocked. It starts only in the beginning (light screen with red figures on the lef top) and that's all.
In this position it could not activesynced to upload the factory rom.
Please, advise me what to do.
Click to expand...
Click to collapse
Sameproblem, someone has a solution?
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
bravo2001 said:
There is a possibility to load the bootloader!
Press and hold camera & power buttons together and make soft reset with your pen and hold camera & power buttons together until it says "bootloader mode"
Here you can load your rom on to it!
Good luck!
Ps. does anyone have a original dutch tmobile rom?!
Click to expand...
Click to collapse
Already tried that 60 times... i think i need a original dutch tmobile rom...
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Been there a few times myself.
Do you live in the US? If so, I could call you and walk you through it, or MSN chat, or??? or if you'd rather, let me know and I will try to walk you through it in here.
I am in Europe, time difference is large, appreciate if you give step by step instructions in this forum. Thanks again.
SuperSport,
Hi agin, waiting for ur instructions. I am missing my trinity.
Once agin thanks for ur help
Sorry to hear that...you can have a look here:
http://forum.xda-developers.com/showthread.php?t=299659
and here
http://trinityguides.info/index.php?option=com_frontpage&Itemid=1
hope that can help...
good luck...
jma81113 said:
I tried to upgrade the ROM n my trinity without putting the device in the SPL. The device went dead completely and I could not start it on. I tried to soft reset, hard reset, and tried to get the SPL but nothing is working. When I tried to upgrade it gives message 260 “no connection”. Could anybody tell me how to revive my trinity or get it working again?
Click to expand...
Click to collapse
I apologize jma81113. I was unexpectedly called out of town. My nephew crashed his motorcycle and is in the hospital, so I rushed over there. I'm back now.
Any time I cannot flash another rom, I am forced to flash back to an OEM rom, in my case, I use the one found here: http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
This flashes back the original SPL, Radio, OS, etc... It works best if you can do it from a Windows XP computer. If you don't have that option, there are ways to do it using Vista outlined here.
Then I always flash the Hard SPL found here. In my case, I use Des' Crash Proof. I've had the most success flashing Cooked ROMS with this one.
From there, Flashing Cooked ROMS should work just fine. If you run into trouble, you might have to flash back to the OEM ROM again. Occasionally, I have to. I keep a copy on hand at all times.
Oops! Actually, as I read back through your message, I see that you might be getting just a BLACK screen? Is this correct? And I assume by you saying you tried to get the SPL that you mean you pushed the 'power' 'camera' and 'reset' buttons and nothing? If that's the case, let me know and I'll do some more research.
Just so I know, do you get the orange LED lighting up when you plug in the USB cable showing it's charging?
SuperSport
I am sorry to hear about your nephew accident, I hope he is well and wish him well.
Yes I got a BLACK screen when I press the 'power' 'camera' and 'reset' buttons. The device is completely dead.
When i connect the device to the laptop, red LED lights up for 10 seconds and then disappears, I even changed the battery but no sucess.
Hard Reset?
Oops! Sorry, just re-read your first post. Looks like you tried this already...
The Black Screen is new to me, so I'm shooting in the dark.
You many have already done this, but, have you tried a HARD reset? Press the 'Calendar' 'Contacts' and then 'Reset' buttons all together. Hopefully this will bring up a screen that asks if you want to do a reset. Press the Green Send key and it will reset. Let me know if that works or not...
Buttons shown in attached image:
I have done it already no luck, it seems I am going to send it to the dealer in Malaysia. Thanks any way Supersport for your time and effort. Once again hope your nephew is will.
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
try putting your phone into the bootloader screen and reflash with another rom.
I have a friend that had this problem with his phone. In his case there was a problem with the pagepool, installing a different rom as cobbs stated was the solution for him as well.
FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
some of us have had this problem already - my advice- use tbe search function 'cmd task 29' is the answer
Hi Gort
Thanks for the wonderfull advise.
I already thought my phone was a gonner, but now I can work with it again.
For all the people who experience a phone that keeps hard resetting more often and eventually cant boot at all, here's what to do.
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
5. Now, run mtty1_1_.42_538 on PC.
6. If you have run mtty1_1_.42_538, just press the button USB
7. Type CMD
8. Type task 29 and let the program do his work a bit.
9. after that, flash with the rom of your choice
here is the link to mtty1_1_.42_538
http://forum.xda-developers.com/showthread.php?t=490182&page=4
Thanks for all the help guys, most appreciated
and hopefully this thread will help others now as well
edit: Link updated, should work fine now
problem flashing
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
brightman said:
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3451487&postcount=41
I have flashed my at&t tilt 2 with core cell evo v1.2 & it was working fine for awhile but now my screen is just black i can hear the phone make sounds and all but can't see the screen at all i really need help fixing this as this is the only phone i have any help or suggestions will be greatly appreciated thanks in advance.
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
heres a link to a potential problem solver. Try to stay away from CHT lock and auto update apps!
sagarc88 said:
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
Click to expand...
Click to collapse
yes i have done both and after the phone reboots i can hear sounds but i am still unable to see anything on the screen
Edit - I take that back, if it's still not working after a reboot
Have you tried entering the bootloader and re-flashing with the stock ROM?
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
steviewevie said:
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
Click to expand...
Click to collapse
i can't even tell if i can enter the bootloader screen because i can't see anything on the screen is there any way to tell if it's in the bootloader screen without being able to see the screen at all & if i do have a hardware problem (screen failure) how can i put stock spl & stock rom back on the phone to get it serviced
steviewevie said:
Edit - I take that back, if it's still not working after a reboot
Click to expand...
Click to collapse
if its still not working after a reboot then what? please help me i need a solution to fix this because if i can't even fix this how can i even send it in to get fixed i won't be able to because it has been flashed & has hardspl on it
"PLEASE HELP"
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
steviewevie said:
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
Click to expand...
Click to collapse
how can i flash anything if i can't see the screen?
Doo Doo said:
how can i flash anything if i can't see the scrren?
Click to expand...
Click to collapse
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
steviewevie said:
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
Click to expand...
Click to collapse
man i really need to fix this maybe you can ask around for me since i'm new here & really don't know anybody on this board
I know it's frustrating, I'd be kinda worried if I had an apparently-non-working screen too. But please be patient, and wait for more people to see your posting. The folks in the US will be coming online around this sort of time, so there will be more people looking in and hopefully someone can help further.
Flash without seeing the screen
Enter boot loader even if you can not see the screen. You can flash your phone to stock then enter boot loader again and hard spl. I had a similar situation and was able to complete the process and warranty repair with AT&T no problems, or you can pay to have it fixed at an outside shop. I was quoted 150 and refused to spend that muck so I flashed the phone without seeing the screen...
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Russ741 said:
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Click to expand...
Click to collapse
well when i plug my phone to the computer activesync is not popping up what can i do to get activesync to recognize my phone
can somebody please help me i need to reflash my phone but i am unable to see anything on my screen when i plug it up to my computer activesync is not working so what can i do please i really need help with this
Flashing witout screen
Step 1
Enter boot loader mode (* Remove the back cover from the phone.
* Hold the Volume Down button.
* Use the stylus to press the reset hole.
* Or if the device was powered off, press the power button whilst holding down the Volume Down button.)
and attach to computer. (wait 30 to 60 seconds)
Step 2
Check device manager for HTC mobile sync under mobile devices.(Active sync will not work in boot loader mode)
Step 3
Flash using Rhodium CustomRUU on your PC. (use original ROM from At&T.
Step 4 repeat for Radio
Step 5 Use Stock_SPL_Restore_087.zip from http://forum.xda-developers.com/showthread.php?t=550131 repeat the process with it.
This should work it did for me. Let me know if you run into problems.