hi
even i cooked my own rom and flashed it to my xda orbit.
but now i've got the problem the screens stucks at the first screen where the hints like IPL, SPL, GSM is.
i think its over with my phone. put out the battery and so on doesn't solve the problem.
what can i do now?
please help me
Make a hard reset or enter bootloader mode and reflash it again.
Thanks i could solve it
Related
I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
Have a look at the "Are you having problems upgrading to Crossbow" sticky at the top of the forum, it'll take you through some steps. It's ok, it's kinda common and should be easy to get out of. Go through those steps and if you've still got problems, post back.
Regards
Spyder
rind9 said:
I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
Click to expand...
Click to collapse
Please check your private messages, I have sent you one that should resolve your issue.
-Jwrightmcps
Also, please post if this fixes your problem...
Jwrightmcps said:
Please check your private messages, I have sent you one that should resolve your issue.
-Jwrightmcps
Also, please post if this fixes your problem...
Click to expand...
Click to collapse
Thanks for quick respons.... I have also read all this links before i wrote my thread with no succes. But, but in that link you gave i saw that
i should not use copy/paste on the screen when i use mtty1 but it should be manually inserted... I mean this command: task 28 55aa...and i am now reflashing it with orijinal rom... i hope it will help... i will be back with result
i am a happy man
It is ok now... A last Q... I really want to use/test your rom, but i am afraid of it will give the samme result. Do you think i should do it..! THANKS AGAIN...
I-mate Jasjar stuck on bootscreen
after upgrade My Jasjar is hanging at boot and i can not get him into bootloader screen anymore all the things in the forum i tryed but
it looks like my buttons are not working anymore my power buttons is not doing anything and a reset gives back a stuck bootscreen with red letters
can someone please tell me what to do now
thanks in advance
Don't ask me how but i did get him into bootloader screen and did de upgrade again now it works fine with crossbow at last
thanks for the people who where thinking how to help me but i solved it myself.
pls help my
[I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
zac_cosmin said:
[I NEED YOUR HELP.... My qtek 9000 will not start, after new rom update with JASJAR Crossbow.... i have flashed back to orijinal rom but it stuck on boot screen.... it shows qtek logo and freeze there... I can put it on bootloader mode and reflash again with every rom but it wil not start after qtek logo on the boot screen...however my uni is stuck at the post screen with all the boot info. It is useless now, please help me...
Click to expand...
Click to collapse
Welcome
Please READ the Wiki!!
Good luck,
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
hossamha said:
hi
i have imate jamin after i finis making a hard spl for it a soft reset done after it the screen flashed and the device off and now i cant restart it what i can do to fix it
plese i nedd help asap
Click to expand...
Click to collapse
try holding the camera button, the power button, and poking the reset hole? if this does anything...thats good. from there hopefully you can reflash the hard spl.
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
hossamha said:
i've tried this but there is no response from my device i cant find any way to make my computer find it
i know that you mean the boot loader but my device seems like there is no power on it at all
only if i remove the battery the screen flashed and then nothing
i'm trying to find a way to fix this problem on many sites but i find nothing
so what??????????????????????????????????????
Click to expand...
Click to collapse
well, im sorry to say that i do not know near enough about this kind of thing to help you out here - im mostly a beginner myself.
CAN ANYONE ELSE HELP HERE?
so quick question, you are aware that while in the bootloader, the pc does not have to really..RECOGNIZE it...right? as in...active sync will not know its there, and its not going to show up in my computer? but the RUU should recognize it. have you just...tried it?
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
I think this is normal my Diamond vibrate on every Startup and when I inital an Call.
Ghostrider
No actually it's not the phone's vibration. It's the image on the screen witch is "flashing" and vibrating.
After a sleeping time, the vibrations are less visible.
If the image on the screen becomes "fuzzy" (like TV interference), it almost sounds like faulty screen some people were experiencing. I doubt it have to do something with your flashing, just happened coincidentially at same time.
nael33 said:
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi, i did have the same problem using TLR (cant remember what version).
What i did was to flash it again with another ROM (bElite v0.54) and my picture was fine after that
Ive got that problem when I flash ANY rom with HARD-SPL running so what I do is flash back to a stock version of spl (1.37) from here http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
So in this order......
1 - Flash HARD SPL
2 - Flash rom
3 - Flash Stock SPL
Problem solved
nael33 said:
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Try what ratcom said. If it still flashes with standard ROM, I would advise you to make everything original again (ie original ROM & SPL) then send back to HTC for repair.
Hi. After my issue, I decided to downgrade the phone and, when I put the official SPL, it was working. 5 minutes later, I read ratcom's post that confirm the problem and the solution. So, this morning, after charging the battery, I used unsigned SSPL, put the HTC rom, get one more time the sreen issue, and reflash the SPL by an original one just like ratcom said. And ... it's working. No more sreen vibration ! And a new and nice HTC rom !
So, thanks for your help !
Ok, I tried to upgrade from the original WM6 to WM6.1... didn't work (Phone was freezing at the HTC boot up logo)... tried the hard reset many time and still doesn't work. So I recovered with the original Rogers WM6 ROM using the bootloader mode but phone still doesn't boot. Now I only get a black screen.... Please help... not sure if there is anymore hope for my S621.
DrDCT said:
Ok, I tried to upgrade from the original WM6 to WM6.1... didn't work (Phone was freezing at the HTC boot up logo)... tried the hard reset many time and still doesn't work. So I recovered with the original Rogers WM6 ROM using the bootloader mode but phone still doesn't boot. Now I only get a black screen.... Please help... not sure if there is anymore hope for my S621.
Click to expand...
Click to collapse
Welcome to the forum
please search and read
here a good start
http://forum.xda-developers.com/showthread.php?t=415225
Goos luck
Hi all,
Wonder if anyone may give me a hand on my issue.
About two weeks ago, my diamond started freezing on the loading screen, and cannot enter into the wm from there on.
Wonder if anyone can provide some advice on this issue?
I was thinking to do a rom flash, but not a spl flash, wonder would that solve the problem?
Would greatly appreciate if anyone may provide a helping hand!
Thanks!
But your screen it's broken or just freeze?
Because if freeze, probably, it's your hard spl
if it's broken the screen you must download mymobiler, for use phone with PC
i had the same problem but this worked for me:
press both volume buttons and then hit reset, this will allow u to enter the bootlader mode
now connect ur precious diamond to a pc and ur ready to flash a new rom
its js a freeze, first time it happened.
I know this sounds quite noob, but greatly appreciate if someone may explain the procedure of flashing the hard spl for me.
I think it is the hard spl problem too, from consulting with some ppl.
Thanks for your help!
thanks for your advice blackjag,
but without going into wm, i can still sync the rom in from the bootloader from my pc?
Greatly appreciate your help. A bit new at this, so please dont mind that I am a noob and that the questions are stupid.
Thanks!
You can enter in bootloader with vol down + reset.
For flash hard SPL and new rom You must read xda diamond main page
;-)