Develop Bugs

How to flash SPL 2.03

Howd'y just got a new Jasjam Spl is 2.03 how do I go about flashing my rom as the RUU doesn't have my SPl in it ??? Basically I want to updat to CRC's latest

Do some more homework first dude, you dont wanna end up with a paperweight......ALWAYS make sure you have flashed HardSPL before you do ANYTHING.
Take a peek here about what to do: Flashing HardSPL. Then flash away with any ROM you please.

Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one

bongo333 said:
Done a lot of lookin but everything I look at doesn't state anything about the 2.03 version all I want to do is U/grade to CRC's Cooked version, is there a how to incl 2.03 ???? I can't find one
Click to expand...
Click to collapse
seriously....you DO NOT need/want to be using SPL 2.03....you are increasing the risk of bricking your device...flash hardspl 2.10 to your device then just flash CRCs rom using the utility included with it.
Follow the guide i posted earlier to make your device safe to flash then look in CRCs thread for the files you need to run the ROM.

Bongo333, listen to MrVanx.... You asked the question and he's giving you his expert opinion... Listen to his experience cos god knows his guides have helped me out a lot of times...We don't wanna be answering questions tomorrow about how to unbrick your hermes. Its easier if you listen to experience and have a good time upgading your hermes as we won't knowingly steer you wrong..
Cheers

Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks

paulslee said:
Do you know how I can get back to SPL 2.03? as I'm having troubles with my Jasjam, and it's not related to various ROMs etc. and I want to take it back to Telstra, but I know that if it has my current SPL version (SPL-1.10Oli) it will be rejected.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
again there is a guide how to downgrade at mrvanx above

test7875 said:
again there is a guide how to downgrade at mrvanx above
Click to expand...
Click to collapse
I've gone through that, but that only gets you to SPL 1.06, which (I'm not sure really) is an older version which wouldn't be recognised by Telstra as genuine?

Thats fine thats a retail one.
You can go to 1.04
its here as stated on this mrvanx page
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27

Have yout got these page contents anywhere? These links what you write are inactive!

O2 XDA Diamond official ROM (German)

Here you are:
http://rapidshare.com/files/127970437/O2_XDA_Diamond_1.37_RUU.rar.html

perfect - thanks a lot for your support.
If you want to make it like the Stock XDA Diamond, first you have to flash spl 1.37 back.
regards
Anja31

Thx!
Yeah, thanks man!

you are my hero (4 2day)!!!

Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!

Thanks, it is nice to have an backup of the Orginal Rom.
Is it possible that you load on Mega?, with Rapid I have problems it said no DL Slot free.
Ghostrider

http://www.megaupload.com/?d=D5HWC22H

I recommend you use mediafire. Rapidshare is only 50Kb/s for non-premium users...

Brevi said:
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Click to expand...
Click to collapse
Yes there is a häuschen alongside the datum and above the uhr. A .cab is difficult since nobody investigated from where the information comes. maybe a system service like on previous models, maybe it's inside manila ...

thanks a lot.
Finally I can try some other roms without losing my guarantee.
A small guide or a link how to undo the HardSPL thing would be nice.
Greetings
iggboert

thanks a lot.
hier ist the guide to downgrade.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from post #39 in this thread.
2. download the package from post #2 in http://forum.xda-developers.com/showthread.php?t=400950 thread.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, replace the original .NBH in the package from post #2 with this SPL NBH.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.

sushilange said:
http://www.megaupload.com/?d=D5HWC22H
Click to expand...
Click to collapse
Thanks a lot

thx for the guide

is there a way to get the blue tf3d theme without reflashing my diamond? a solution like just replacing of the manlia.exe or something?
or can anyone upload me a copy of the manila.exe from the O²-Rom so i can try it myself?
regards
Fabian

Hallo!
I bought a 02 XDA diamond. But it is in German (windows 6.1). I would like to change the language from German to English. Does anyone can help me how to do this.
I have no idea what is ROM and so on. I am completely new to this process. Shall I have step by step instructions please?
Thank you in advance!
Greetings!
Sony

whats the deal-will we be getting a WWE O2 ROM anytime soon? I love the blue tf3d
anyone has any luck with a separate cab created for this ?

can anyone sign this for me to use?

anyone ????

First of all I want to thank the guys posting the "reflash" Instructions again and again, so I finally found them too. Since Im trying out a lot with my Diamond (Not my first WM device, but first with cooked rom) I appreciate it, that it is possible to get back for warranty reasons.
There is just one little thing that I am not sure about yet:
I know:
- instal unsigned Had SPL
- Flash stock Rom (O2 XDA DIAMOND in my case)
- Flash stock SPL (I found he package in the Post mentioned)
I dont know:
- wich of the three versions in that spl-package is the one i need???
I hope so can tell me even though i hopefully never have to try this procedure!
Thanks so far

Hi and thanks for your great work.
My request would be for a stock O2 WWE ROM 1.93 if this is possible?

Help with ROM update please.

Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke

y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky

OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!

This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950

harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)

he is asking for unsigned one also (i nv see wrong @ his post)

read again.. he already has 1.40 olinex (which is unsigned)

Htc Diamond Change language

Hey guys i'm a noob at this stuff.
I'm staying in Italy for the moment so i bought me a HTC diamond.
But the problem is that it's in Italian...
I've tried reading a lot here before making this thread but i just couldn't figure it
on my own anymore.
Can somebody help me with a step by step procedure in doing this in Detail and suggestive links??
The flashing, the radio and the WWE ROM.
If somebody could help me out here i would appreciate it very much
Thanks

http://forum.xda-developers.com/showthread.php?t=416211
read this CAREFULLY to flash a rom in language you want.

Ok i understand that part...cause i've been reading this whole thread for sum time now.. but the problems is that the new WWE Rom...i downloaded it but it says it's corrupted... how do i go about this???

Hard SPL installed? If yes try another WWE ROM

i will check it out....cuz if tried installing HARD SPL Olinex

Problem with FLASHING my HTC TOUCH DIAMOND

Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^

i try this rom and its running with no probleme

Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.

Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^

I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..

Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again

It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end

.....And did it work?

So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys

Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...