Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
i try this rom and its running with no probleme
Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.
Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^
I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..
Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again
It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end
.....And did it work?
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...
Related
http://rapidshare.com/files/121817898/Trinitin_-p3600i-Working_Mary-wwe-wm6.1.rar.html
this is a repack of the Mary 3.7 WWE lite FOR THE P3600i as found elsewhere in this forum.
YOU NEED TO have the 3.2 hardspl from olipro installed and have the phone in bootloader mode in order for this to work.
thx
it work perfectly on my phone
but strange
in tri color screen still show the SPL-3.20.Olipro
not SPL-3.10.Olipro ??
amanx said:
thx
it work perfectly on my phone
but strange
in tri color screen still show the SPL-3.20.Olipro
not SPL-3.10.Olipro ??
Click to expand...
Click to collapse
3.2 is what i have - it worked for me.
thks ajajaj will try and posted. being download now
Do I need to change anything in this ROM (the 400 to 401) ? I have a HTC9110 ...
Thanks,
Moni
now my CHT9110 got P3600I WM6.1 mary..and work fine. thks ajajaj.
btw..what wrong with other cook WM6.1 for P3600i, why when i try to flash it get through the process but the phone get stuck on boot screen.
appreciated for your advise.
mrmoni said:
Do I need to change anything in this ROM (the 400 to 401) ? I have a HTC9110 ...
Thanks,
Moni
Click to expand...
Click to collapse
just flash Hard spl by Olipro and follow with this repack mary WM6.1 by ajajaj...you will happy like me now.
what does repacking the ROM involve? can it be done manually for other cooked ROMs?
ssamth2003 said:
just flash Hard spl by Olipro and follow with this repack mary WM6.1 by ajajaj...you will happy like me now.
Click to expand...
Click to collapse
Did it ! Works like a charm
Thank You !!!
i hv test for an afternoon
i use 3g network with 3HK
i find that the 3g signal is very week when compare with the original wm6 htc rom
is there any method to solve the problem??
thx
Thanks Worked!!!!
going to try the
P3600I WM6.1_5.2.19588(Diamond) WWE ROM support CHS,CHT,JP,KR,TH,ENG,RU,GR V03.13.YK rom next
Can you do a full guide include all the files and all the proccess? for someone that never done rom flash... and i can put any rom?
Please, how i do the flash... step by step... I didnt get it
Here you are:
http://rapidshare.com/files/127970437/O2_XDA_Diamond_1.37_RUU.rar.html
perfect - thanks a lot for your support.
If you want to make it like the Stock XDA Diamond, first you have to flash spl 1.37 back.
regards
Anja31
Thx!
Yeah, thanks man!
you are my hero (4 2day)!!!
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Thanks, it is nice to have an backup of the Orginal Rom.
Is it possible that you load on Mega?, with Rapid I have problems it said no DL Slot free.
Ghostrider
http://www.megaupload.com/?d=D5HWC22H
I recommend you use mediafire. Rapidshare is only 50Kb/s for non-premium users...
Brevi said:
Just wondering, is there a "Homezone" app in the Rom...or is there maybe any "Häuschen" in the TouchFlo3d? If there is a cab file it would be really great if you could post it here.
Thanks man!
Click to expand...
Click to collapse
Yes there is a häuschen alongside the datum and above the uhr. A .cab is difficult since nobody investigated from where the information comes. maybe a system service like on previous models, maybe it's inside manila ...
thanks a lot.
Finally I can try some other roms without losing my guarantee.
A small guide or a link how to undo the HardSPL thing would be nice.
Greetings
iggboert
thanks a lot.
hier ist the guide to downgrade.
if you have unsigned hardspl, you'll need to use the SSPL package (i.e. the same package that is posted in HardSPL thread to flash the hardspl), just replace the NBH file with one of these stock SPLs.
if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that).
also,
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from post #39 in this thread.
2. download the package from post #2 in http://forum.xda-developers.com/showthread.php?t=400950 thread.
3. pick the SPL you want to reflash to (ONLY FOR WARRANTY REASONS), it's a .NBH file, replace the original .NBH in the package from post #2 with this SPL NBH.
4. run the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+5. to verify, volume down + reset, see version number on tricolour screen.
sushilange said:
http://www.megaupload.com/?d=D5HWC22H
Click to expand...
Click to collapse
Thanks a lot
thx for the guide
is there a way to get the blue tf3d theme without reflashing my diamond? a solution like just replacing of the manlia.exe or something?
or can anyone upload me a copy of the manila.exe from the O²-Rom so i can try it myself?
regards
Fabian
Hallo!
I bought a 02 XDA diamond. But it is in German (windows 6.1). I would like to change the language from German to English. Does anyone can help me how to do this.
I have no idea what is ROM and so on. I am completely new to this process. Shall I have step by step instructions please?
Thank you in advance!
Greetings!
Sony
whats the deal-will we be getting a WWE O2 ROM anytime soon? I love the blue tf3d
anyone has any luck with a separate cab created for this ?
can anyone sign this for me to use?
anyone ????
First of all I want to thank the guys posting the "reflash" Instructions again and again, so I finally found them too. Since Im trying out a lot with my Diamond (Not my first WM device, but first with cooked rom) I appreciate it, that it is possible to get back for warranty reasons.
There is just one little thing that I am not sure about yet:
I know:
- instal unsigned Had SPL
- Flash stock Rom (O2 XDA DIAMOND in my case)
- Flash stock SPL (I found he package in the Post mentioned)
I dont know:
- wich of the three versions in that spl-package is the one i need???
I hope so can tell me even though i hopefully never have to try this procedure!
Thanks so far
Hi and thanks for your great work.
My request would be for a stock O2 WWE ROM 1.93 if this is possible?
Help me not changed my spl-1.38.01 iNex to 1.37 , 1.93 , 1.40.
And there is no update inflicted by non-Elite x.x
I want download the update panosha Shine On 0.6 Diamond WWE ROM
What is the solution please?
Hi,
I would recommend that you change your HardSPL to 1.40 (OliNex). I had issues trying to use other versions.
This HSPL should allow you to change to any ROM you wish.
Thanks you harvsHK76
But how do I change to 1.40, where I find
Go to:
http://forum.xda-developers.com/showthread.php?t=400950
and download the first of three .zip files (unsigned-hard-spl-diamond)
You should be good to go,
I worked these steps but has not changed to 1.40
I am unsure why it wouldnt change, I used the exact same file yesterday and had no problem. Can you try again and let me know.
Thank you to help me now Ok
Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke
y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky
OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!
This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950
harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)
he is asking for unsigned one also (i nv see wrong @ his post)
read again.. he already has 1.40 olinex (which is unsigned)
Guys,
Currently stuck with 1.37 orange ROM on my orange HTC Touch and want to replace the ROM with one of these new up to date ROMS but I have a problem :-(
Have downloaded HardSPL_Olinex137_Unsigned.zip to flash the phone but when doing this all I get is the phone sittong at 0% and doesnt process the update!!!
Have followed all the checks before updating but just wont move from 0%!!!
Any ideas would be great!
Cheers
D3tox
I had this issue and so use the 1.24 SPL and have had no problems at all on my Orange Diamond
1.24 Works Fine On Orange
you do mean touch diamond...and not a touch??????
just checking
here is a link for you
http://forum.xda-developers.com/showthread.php?t=408621
d3toxuk said:
Guys,
Currently stuck with 1.37 orange ROM on my orange HTC Touch and want to replace the ROM with one of these new up to date ROMS but I have a problem :-(
Have downloaded HardSPL_Olinex137_Unsigned.zip to flash the phone but when doing this all I get is the phone sittong at 0% and doesnt process the update!!!
Have followed all the checks before updating but just wont move from 0%!!!
Any ideas would be great!
Cheers
D3tox
Click to expand...
Click to collapse
HardSPL also comes with the software unlocker hspl v1.23 or 1.24. so if you have done the software unlock, that means you have already upgraded to the best hardspl. if not go for the unlocker, very easy to use and comes with complete instructions.
problem you are getting might be due to bootloader or usb problem
hehe oops yup i meant the diamond ;-)
cheers guys ill give 1.24 a go and let you know!
D3tox
** Who dares wins! **
xdaking said:
HardSPL also comes with the software unlocker hspl v1.23 or 1.24. so if you have done the software unlock, that means you have already upgraded to the best hardspl. if not go for the unlocker, very easy to use and comes with complete instructions.
problem you are getting might be due to bootloader or usb problem
Click to expand...
Click to collapse
just tried running v1.24 from the above link given by liamhere and is still just sitting at 0% when running update.
which part is the unlocker? Sorry just a newb to the HTC ROM updating
1.24 didn't work on my orange (stuck on 0%). 1.40 worked fine.
If I remember correctly connect diamond to PC adn then double click on diamond_sspl and follow the instructions, then run the RUU in the 1.24 folder by double clicking on it.
AGxN you diamond! that sorted it! Next question
which ROM is best going for?
d3toxuk said:
AGxN you diamond! that sorted it! Next question
which ROM is best going for?
Click to expand...
Click to collapse
belite
swiftbl
duttys
???
Im A Dutty Man Myself...
but try this http://forum.xda-developers.com/showthread.php?t=405728
i was most impressed...i have like many here used all the roms
good luck and have fun in this forum
I am a Dutty's lady but am tempted to try swiftbl or Panoshas new ones - will have a play tonight.
cheers!
Ill give them all a go
thx to everyone again!
AGxM said:
I am a Dutty's lady but am tempted to try swiftbl or Panoshas new ones - will have a play tonight.
Click to expand...
Click to collapse
using Panoshas new one now......its very good you know
just tried a few of the ROMS and really liking the Shine On 1.5 ;-)