i have been using the p3300 for a month now an it was working fine but all of a sudden i couldn't use my stylus. i tried the screen allignment but the screen didnt respond so i restarted the device. this also didnt work. i also tried a soft reset. no results so i did a hard reset now i am stuck at the screen where it says " Tap to start your device "
Plz Help....
Hi
It sounds then like the touch function of the screen has stopped working.
If you have only had it a month depending on where you got it you may be able to return it.
Sorry about this
Cheers Dave
maybe
seems like that to me too
still i hope i wont need to
anyway thanks
no problem
Anytime
If you have not yet returned it, try taking the screen protector off if you have one on.
My screen stopped responding to touch a while back. When I took the protector off all was fine.
could be it
may be but i am not sure about it i will try it nonetheless
Thanks
screen needs rest ??
nope no use the screens gone crazy i guess
it recognises a few strokes when left for a few hours the goes dead again
maybe it need some rest
On the screen, round the edges make sure there’s no gunk under the gap between the case and screen. You will be surprised what can get under there. Flat Plastic tooth picks are good for clearing it
i am nooob
cant try it
dont really know how to remove the screen guard
cant find the seam
Hi
You might not be a Noob. You can only remove a Screen Guard/Protector if you have actually put one one.
Also i still dont think there is much you can do.
If it does work after a while it is possible that the screen calibration has gone haywire If you get chance to use it try doing that it may help
Cheers Dave
mine to same problem please help
Related
I got my hermes from my friend, (HTC X01HT), she didnt want it because she dropped it and the ringer didnt work. it had only gotten unplugged, so i opened it, plugged it in, and had an awesome phone.
I dont think this is normal, but from the time she gave it to me, the screen made an awful highpitched ringing noise, (very uni-directional, it was weird).
Anyways...
now, the screen is just white. for a little while i could get the screen back, just by opening and closing the slider and hitting the power button a couple times.
Sometimes the today would display, then it would jarble up a little bit then fade to white, but i cant even get it to do that anymore.
Anyone else seen this issue? i'd hate to get rid of a perfectly awesome phone.
Thanks!
(also, if someone could post a picture of the device locked screen, where you have to enter a PIN to use the phone, that would be great, im trying to get into the phone with activesync, but its locked, and i dont know where to push the buttons.)
thanks!
~Mix3d
Looks like the screen is unplugged, really. Maybe you need to disassemble further, like http://www.pdacenter.ru/razborka/razbor_hermes/ shows?
keep in mind, it worked fine for almost three weeks before the screen issue started... but i will try that when i get my hands on a small flathead again.
There's a whitescreen & D-Pad failure issue that can be caused by many things, including DROPPING the phone.
I wrote a guide about it which seems to be quite successful for many people.
http://forum.xda-developers.com/showthread.php?t=321163
so after trying a hard-reset, (which somehow displayed on teh screen), and clicking no, i was able to get the screen back... only this time with the moved screen problem, wrapping around at the top about 1mm.... and the buttons didnt work.
i tried your guide, but now im stuck at the white screen again... :/
Tyman07 said:
**** You Dude!
Click to expand...
Click to collapse
Hi all, I got my touch pro 2 through Orange a while back and I have this frustration which is really ticking me off. The touch screen stopped working!
It looked like it had a fine film of transparent oil which surrounded a fine grid pattern which you could see if you held your phone against the light at an obscure angle. Nothing is more infuriating than trying to back up your phone, or import emails onto the computer before sending it away for repair, to find that the back up software that comes recommended can't be installed because... wait... you guessed it.... you need the soddin touch screen to install the bloody thing.
My question to you guys is this, has anyone found a way to use the keyboard as an alternative to 'ok', 'cancel', 'install' and other important functions?
It has already been away for repair becuase of this 'recognised' issue, and now it's gone again. I'm getting fed up with HTC stuff going faulty on me, and i've had a lot of their products, however nice the phone is.
Thanks in advance for any and all assistance...
insomnai
my tp2 touch screen is not responding suddenly!!! the problem started only after i answered some call through the screen slider, however, the touch screen is not responding to my fingers ever since !!!!
now i'm operating the phone only through the buttons !! but as if it is not touch screen!!
anyone have a clue about what the problem can be?? please help me. my device runs wm 6.5 and this is the first time to have this problem, i did soft reset many times but no imrovment!!
I had SOD this early morning and it was my first, do you guys think there is a relation between these events???
I have the same problem.
Just happened this morning.
I was able to use my mobiler to access the screen.
Tried several hard resets. No luck.
Tried re-installing energy Rom (4.1)
Then tried the new Energy Rom (4.11) still no luck.
But then I got the big idea to go back to the stock ROM. Now I cannot use the on screen prompts to access "my mobiler"
Anybody have any suggestions or is it back to AT&T for a new phone?
so whe you back to the stock rom, did u get ur screen working again??
No. no workey
Now that stock rom is on. I keep going back to the "Sim Card Changed" screen. I can not tap "cancel" or "Next". I can use the hard buttons so I am able to get to the phone and then use keyboard to dial.
Still no touch screen. And no work around with keyboard to get to screen. need a "Tab" button. then might be okay.
this sucks.
Just a quick bump before I go to AT&t in the morning.
Try running task 29 and then flash back to a stock.
And have you tried taking your sim card out of you're phone? Maybe that will avoid the message.
i'm buying a black berry
Does your screen look as if an oily residue is under the touch screen part?
My screen stopped responding a few weeks after the appearance of the 'oil' and Vodafone swapped it with no problems. It seems like a fairly common problem
yes, I've got that oily spot and somehow i managed to relief the problem only for minutes when i raised the digitizer carefuly which got me the screen working for few minutes untill it went unresponsive again after while. I'm looking forward to do alcohol swab to this oily spot and will see weather this will solve the problem..
Ok..i searched the forums and didnt see the problem i have ran into so any help is appreciated.
I get a black screen but the phone starts up and runs fine..i can fiddle with it and make calls etc..the screen is responsive to touches..just black entirely. But...on occasion it will decide to show the start up Touch Pro screen and stay there..and on occasion i can get the hspl screen to show up..but its very infrequently and seems random.
I have reinsalled the hardspl..i have reinstalled the ROM several times..i have task29ed it..still its working but the screen is black.
Im assuming there is nothing wrong with the screen as it does work fine on occasion (just never gets past the opening screen)..so any suggestions?? Please help.
Let's try this
Did you try to go back to the original ROM, or a factory rest - check the manual for that.
Also, try the shortcut in the manual to get to the boot screen.
Good luck...
Black Screen
It is your light sensor, either it is malfunctioning or it has driver corruption problems, probably the light sensor. I posted a fix a couple of days ago that cured my tilt 2 of essentially same problem. You must remove all reference to polling light sensor, ie, backlight automatic, keyboard backlight and phone backlight off on calls. Review my earlier post for details
black screen fix
Here is the link to previous post:
http://forum.xda-developers.com/showthread.php?t=693270
Thanks for replying to that person ms0529!
black screen
glad to be able to offer a solution that is proven to work in some similar cases. Hope it fixes his problem.
ms0529 said:
glad to be able to offer a solution that is proven to work in some similar cases. Hope it fixes his problem.
Click to expand...
Click to collapse
GAH, I LOVE YOU! i had a similar problem, my screen wood work fine wen u started the fone but once u let it go off it woodnt come bak on unless u restared the fone, however the screen was still sensitive wen it was off, i delt with tht for about 2 months but this fixed it THANKU SO MUCH
Dead Touchscreen, i said to myself its not a big deal i can live without it until i take it to tmobile to get fix. Five Min later got a text and i can't even click send to reply to the text now i honestly need the touchscreen... any alternative way to hit send?
dont just view it reply to it please...
Hello,
maybe this has a simple solution:
I had a dead touchscreen some days ago, even a reset didn't help. Then I removed the screen protector foil (Martin Fields) and everything was fine. Somehow the screen protector continuously triggered the touchscreen at one point so no other input was possible.
If you use a screen protector, try to remove it. Or try a hardreset.
If all else fails, you'll have to send your device in for fixing it. Until then, maybe you can get along with a software called MyMobiler. It lets you use the Phone right from your Computer via ActiveSync. So you should be able to send a message but I dont know if you get it installed without the use of touchscreen.
Dennis
Dennis78 said:
Hello,
maybe this has a simple solution:
I had a dead touchscreen some days ago, even a reset didn't help. Then I removed the screen protector foil (Martin Fields) and everything was fine. Somehow the screen protector continuously triggered the touchscreen at one point so no other input was possible.
If you use a screen protector, try to remove it. Or try a hardreset.
If all else fails, you'll have to send your device in for fixing it. Until then, maybe you can get along with a software called MyMobiler. It lets you use the Phone right from your Computer via ActiveSync. So you should be able to send a message but I dont know if you get it installed without the use of touchscreen.
Dennis
Click to expand...
Click to collapse
i know a program called Dashwire that works the same way but threw your Internet browser, and i think ur right about the screen part, at one point my screen kinda flex in when touch , now it sit flat.
Edit: There are ways to remap the keys http://forum.ppcgeeks.com/showthread.php?t=91134&highlight=remap+hardware+keys
That tip about removing the screen protector was spot on.
My TP2 is working again, I was worried for a couple of days
Thanks!