Help my phone is dying!!! - 8525, TyTN, MDA Vario II, JasJam ROM Development

I got my hermes from my friend, (HTC X01HT), she didnt want it because she dropped it and the ringer didnt work. it had only gotten unplugged, so i opened it, plugged it in, and had an awesome phone.
I dont think this is normal, but from the time she gave it to me, the screen made an awful highpitched ringing noise, (very uni-directional, it was weird).
Anyways...
now, the screen is just white. for a little while i could get the screen back, just by opening and closing the slider and hitting the power button a couple times.
Sometimes the today would display, then it would jarble up a little bit then fade to white, but i cant even get it to do that anymore.
Anyone else seen this issue? i'd hate to get rid of a perfectly awesome phone.
Thanks!
(also, if someone could post a picture of the device locked screen, where you have to enter a PIN to use the phone, that would be great, im trying to get into the phone with activesync, but its locked, and i dont know where to push the buttons.)
thanks!
~Mix3d

Looks like the screen is unplugged, really. Maybe you need to disassemble further, like http://www.pdacenter.ru/razborka/razbor_hermes/ shows?

keep in mind, it worked fine for almost three weeks before the screen issue started... but i will try that when i get my hands on a small flathead again.

There's a whitescreen & D-Pad failure issue that can be caused by many things, including DROPPING the phone.
I wrote a guide about it which seems to be quite successful for many people.
http://forum.xda-developers.com/showthread.php?t=321163

so after trying a hard-reset, (which somehow displayed on teh screen), and clicking no, i was able to get the screen back... only this time with the moved screen problem, wrapping around at the top about 1mm.... and the buttons didnt work.
i tried your guide, but now im stuck at the white screen again... :/

Tyman07 said:
**** You Dude!
Click to expand...
Click to collapse

Related

Wierdest thing happened to my 8525 please help!!!

ok so i searched on the sites for a fading to a white screen problem but it looks like its related to the dpad... my phone was really low on battery last night it kept beeping continuously... so by the time i got to plug it in the screen started to fade to white... now the screen has vslight vertical lines and every time i shut off the phone with the power button and turn it on it comes normal but as soon as u touch the screen it fades to white!!! was this caused by the low battery. i fully charged it but still have the same prob. i tried clearing my storage and that didn't help..what do i do?
white screen
you will need to replace the board for the dpad.
ok thanks. is this the same issue that others are having as well? the wierd thing is half the time it works the other half it doesnt...
I had a similar problem. I had pressed the power button to check the time and screen was white! SR rebooted and after the first splash screen the screen faded to white. I finally founded a product called Pocket Controller http://www.soti.net/ (trial ver works fine) that allowed me to see my phone on my computer. I was then able to backup my data to the storage card. I reflashed the phone and it’s worked fine afterwards.
yeah man thats what happened to me exactly... im reflashing the official wm6 rom now... ill post what happens... thanks
Silverexp said:
I had a similar problem. I had pressed the power button to check the time and screen was white! SR rebooted and after the first splash screen the screen faded to white. I finally founded a product called Pocket Controller http://www.soti.net/ (trial ver works fine) that allowed me to see my phone on my computer. I was then able to backup my data to the storage card. I reflashed the phone and it’s worked fine afterwards.
Click to expand...
Click to collapse
damn it didnt work with me my screen still goes in and out when it chooses to. and it is my dpad b/c it stops working when the screen is gonna go..
Hi,
Try tightening the screw behind the red hang up button on the dpad. There is a component behind there which causes this problem. If tightening doesn't work try loosening. It's all to do with the pressure on the chip. Very odd problem.
Also try squeezing the bottom right hand corner of the phone and SR.
Bonkers solution for a bonkers problem but it certainly fixed one of mine.
Good luck!
yes, the screw tightening/unloosing thing works for me. same thing happened when i dropped my unit. i even completely dismantled it (managed to fix the microsd card spring). something loose with the connections.
niec guys thanks... i will try the tightening and loosening the screw... i tried holding down the bottom right and SR didn't work but thanks anway... i guess i have to buy a screw driver to open this thing up... god i remember when i had to take apart my mpx 220 im getting flashbacks!!!
Had exactly the same problem but mine was due to an phone shop employee dropping it. It would do exactly the same as yours. Sometimes it would work fine and once when I reflashed it the problem went away for a few days but if came back.
I used to control it using Soti pocket controller but them migrated to Net Support as that allowed me to control over wifi. In the end had to get it replaced.

screen not responding help urgent

i have been using the p3300 for a month now an it was working fine but all of a sudden i couldn't use my stylus. i tried the screen allignment but the screen didnt respond so i restarted the device. this also didnt work. i also tried a soft reset. no results so i did a hard reset now i am stuck at the screen where it says " Tap to start your device "
Plz Help....
Hi
It sounds then like the touch function of the screen has stopped working.
If you have only had it a month depending on where you got it you may be able to return it.
Sorry about this
Cheers Dave
maybe
seems like that to me too
still i hope i wont need to
anyway thanks
no problem
Anytime
If you have not yet returned it, try taking the screen protector off if you have one on.
My screen stopped responding to touch a while back. When I took the protector off all was fine.
could be it
may be but i am not sure about it i will try it nonetheless
Thanks
screen needs rest ??
nope no use the screens gone crazy i guess
it recognises a few strokes when left for a few hours the goes dead again
maybe it need some rest
On the screen, round the edges make sure there’s no gunk under the gap between the case and screen. You will be surprised what can get under there. Flat Plastic tooth picks are good for clearing it
i am nooob
cant try it
dont really know how to remove the screen guard
cant find the seam
Hi
You might not be a Noob. You can only remove a Screen Guard/Protector if you have actually put one one.
Also i still dont think there is much you can do.
If it does work after a while it is possible that the screen calibration has gone haywire If you get chance to use it try doing that it may help
Cheers Dave
mine to same problem please help

Phone Broken?

My phone can't seem to work anymore if I slide it out. Everything just freezes, but if I tilt the screen up it works. Has anyone else had this problem before?
Well now the thing just freezes if the keyboard is out at all. I'm guessing it's a paperweight now?
A potential solution
lurker2389 said:
My phone can't seem to work anymore if I slide it out. Everything just freezes, but if I tilt the screen up it works. Has anyone else had this problem before?
Click to expand...
Click to collapse
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
that sucks. might be a ROM things IDK

[Q] HELP! White lines on black screen HTC Desire CM7

A few days ago I succesfully (at least I thought so..) flashed my Desire to Cyanogenmod 7 using Amon-ra and it worked perfectly, until today out of nowhere my screen is black with a couple of white lines from top to bottom. One minute it worked as normal, and a couple of minutes later when I pressed the top button to unlock it, the screen was all weird. The touch functions of the screen seem to work as normal, I can unlock the screen, shut it down, power it up, enter my pin etc (blindly) but I see only the vertical lines so it's hard to check what's going on. I do see that the lines "move" when something changes on the screen, like when I unlock it, I see that the screen does react on it, but only some lines appear, move or disappear. For the rest, the sound works as normal when I turn op the volume, as does the vibrating.
I have a PVT4 S-on (thats all I remember) if it makes any difference.
Picture is from a camera, not a screenshot. Looks a bit yellow or so but the background is black, and the lines are white.
Does anyone know what it caused and what I can do to fix it? Maybe reset it or reflash it someway?
Many thanks in advance!!
Where's the picture?
You might want to give HTC a ring.
Request from puntchiel, a picture of his mobile phone:
http://dl.dropbox.com/u/13976378/P1050923.JPG
Hm I forgot the picture, my friend len posted a link for me, for Im not yet able to do that cauz Im a nub
Thx len!
Yeh, send it to HTC or your carrier. It looks so ****ed
Well, sending it back and profiting from my insurance is my last option cuz I wont have it back for at least a month. Does anyone know what it could have caused or what could be a way to solve this highly annoying thing? I can't imagine that it is a hardware problem that occured this sudden... And the screen is reacting to my input but it only shows the frikkin lines! So I hope that it is a software problem. I just have no idea how to solve it, so thats why I'm asking the pro's on this forum
And btw, if I'm sending it back I need to make sure that they don't find out of the custom software on my device. That leaves me only two options I quess, fixing it or completely smashing it... So if someone at least knows how to use a RUU or something via my PC (without having to use the screen of my desire), your help is very much appreciated!!!
Meaple said:
You might want to give HTC a ring.
Click to expand...
Click to collapse
Ohh yeah thats helpful; i am sure he did not think to contact htc himself
That picture recalls bad experience with my ex Nokia 5800xm. I had to replace display.
Maybe it is not same case but it looks same.
I have exactly the same problem, flashed cm7 on my desire a few months ago.
Worked all fine.
Then yesterday all of a sudden i had a black screen with white lines.
Maybe you, puntchiel, have found any sollution?
I'm sorry Hanswurst, I had my ensurance company pick up my device and they replaced the screen, so I asume it was a hardware problem. I wish I could help you buddy. Good luck with it!

screen goes crazy when browsing.

Ever since my phone came back from repair my touchscreen has been going crazy when I try browse through the internet. It starts typing on its on, selecting random links moving the page up and down and so on. Does anyone know what the issue could be? Its perfectly fine on everyting else only the browser and sometimes facebook app.
I contacted sony and they said send us the phone and we will update it but I can do that myself and dont wat to be without phone for another week.
Does it happen when charger (wall/USB) is plugged in? Few times when I had just my iPhone 4 wall adapter around I tried to use it with Arc, it did charge the phone but screen went totally crazy just like yours but it was everywhere not just the browser. Using the shipped adapter/cable theres no problem.
No phone is not plugged in. Its very starnge cause phone works perfectly but as soon as I want to browse the internet the screen starts acting up.
Just been playing around and the phone is completely fine wen its charging or the usb is connected. Anyone have any idea what could be causing this? I cant send it to sony since its bootloader unlocked.
I need a original wall adpter, I lose it
Sent from my LT15i using XDA App
I sometimes get a similar problem, but it's happening everywhere, not only in the browser. Very annoying, especially on the homescreen... it seems just to think someones touching it here and there all the time and all going mad with this. ^^
However, I can always solve it by turning the screen off and on again.
cherryfish said:
I sometimes get a similar problem, but it's happening everywhere, not only in the browser. Very annoying, especially on the homescreen... it seems just to think someones touching it here and there all the time and all going mad with this. ^^
However, I can always solve it by turning the screen off and on again.
Click to expand...
Click to collapse
I had exactly the same with my previous arc, now it seems the problem is gone but it's only a week i broke the last one but my operator change it. Always had to turn the screen on and off..
The only problem and it's really often and annoying is that the bar at the top of the browser stop to load at the middle and never finish to load with blank page, i press cancel and then refresh and in less than 1 secondes i'm on the page like everything was loaded up but not the graphic part....
I sent my phone back to repair, hopefully they fix it and dont find out that my bootloader was unlocked before.
I believe that is from heat... I get that problem three times.. Just screen off and on.. And its fine.
i have turned screen off and on hundreds of times and still same. I think its something to do with the usb connector since it works fine when connected. Guess ill find out tomorrow.
I have this error a lot, the screen reads "ghost touches" sometimes, it receives constant input at certain part of the screen. sometimes locking and unlock the phone doesnt help, need to reboot.
There's problem with the accuracy of touches near the edges of the screen as well, touches NEAR the edge are received as input AT the edge, this makes it extremely hard to operate the phone.
If you don't understand what I'm saying, go play "Cut the Rope" and try to tap the restart button at the corner, it's freaking hard to get it.
I have visited the SE service center in Singapore, the staff says that there is no problem with the screen, but when i test all the display sets in shops, all has the same issue, so all have the same problem = no problem..
I never had that problem with the screen before so I dont think everyone phone has this issue.
frocee said:
I have this error a lot, the screen reads "ghost touches" sometimes, it receives constant input at certain part of the screen. sometimes locking and unlock the phone doesnt help, need to reboot.
There's problem with the accuracy of touches near the edges of the screen as well, touches NEAR the edge are received as input AT the edge, this makes it extremely hard to operate the phone.
If you don't understand what I'm saying, go play "Cut the Rope" and try to tap the restart button at the corner, it's freaking hard to get it.
I have visited the SE service center in Singapore, the staff says that there is no problem with the screen, but when i test all the display sets in shops, all has the same issue, so all have the same problem = no problem..
Click to expand...
Click to collapse
Exactly the same problem !!! Sometimes really hard to press space driving me mad ....
Sent from my LT15i using xda premium
soldiers33 said:
I never had that problem with the screen before so I dont think everyone phone has this issue.
Click to expand...
Click to collapse
Then you are extremely lucky. I can't prove if all xperia arc have this problem, only tried it with around 20 sets, maybe just nice only that 20 sets have problem.

Categories

Resources