Develop Bugs

IGO 8 on ARTEMIS

Hello
installed IGO 8 on my artemis with meschle rom vanilla 4.02 with cube
runs perfect, for the moment no diverence with speed as tomtom
tomorrow i will give it a special test with monumets , speedcams etc
for my onest opinion layout and design better then tomtom
i noticed for the moment just one minor problem;
Igo 8 gets stuck when s2u2 turns on,i just removed s2u2
are there some other user so i can hear there opinion
greetz Hatchy

Ive installed S2U2 yesterday but haven't run IGO8 yet, so will do it now and post my findings in a bit.

Ok had it running for ten minutes now and has been fine?
i have got S2U2 setup so that it only comes on when the device is in standby and with IGO8 keeping the phone on it doesn't even start S2U2.

IGO 8 vs TomTom Navigator
Yeah,
installed IGO8 too, our 200MHZ TIO OMAP Processor is still fast enough
Maybe in future it will be too slow when 3D graphices are real to life, or like TomTom Navcore 8 (not for pda's). Tomtoms graphics are like a 80's computergame
My father in law still prefers tomtom (very user friendly) even with the 'easy mode' in IGO8.
I still have to test it passing monuments to see the better graphics, but runs smoothly, you can see that they worked on this one.
Any other competitive packages with great graphics ? (tested Destinator & Route 66 already in past). Maybe TomTom Navigator 7 will have better 3D graphics, any news ???
Thanks,
Innovator

using IGO8 from begin of may with full details and works perfect.
I'm not using S2U2

I 'm using iGO8 full with 3d elevations, custom pois etc. Works fine on artemis with Vanilla 4.1 (not touch).
Problems (2) that I mention is:
1. it needs at least 16 MB ram free
2. when I press the call button to make a phone call during navigation, dialpad screen is a mess and no call can be made.
Waiting for a better Greek map because building numbers is totally wrong.
Fantastic piece of software.

navigon 6.5
i also used the igo8. but as i made any turn it ran back in 2d modus. so i went looking for other navi software. tomtom i had for a very long time, but when i wanted to go to croatia for vacantion, i had to switch between 2 maps. western eu and eastern eu. now i use navigon, very convinced that this is really good. had no problems what so ever on the way to and back from croatia. fast and very good working for me.

Tested
Hello
i tested igo almost the whole day
NOproblems
it works great
zero times stuck
i got calls in between no problem
i going to keep it on my artemis , much better grafics then tomtom
one thing, didn't see the 3d buildings yet
greetz Hatchy
HTC P3300 with meschle vanilla 4.02 with cube

Hey i've tested it too ... first I had the "not enough memory" error, now I use filesystem cache 125 kb so it starts at least ...
but if I want to plan a long route the error message of iGO appears: "Not enough Memory, use different parameters"
I've got 27,6 mb free program memory (Meschles Artemis Touch 4.02 Vanilla) ... whats the problem, any of you got an idea???
I think in general Artemis isn't really fitting the performance specifications for iGO 8.
Hello
i tested igo almost the whole day
NOproblems
it works great
zero times stuck
i got calls in between no problem
i going to keep it on my artemis , much better grafics then tomtom
one thing, didn't see the 3d buildings yet
greetz Hatchy
HTC P3300 with meschle vanilla 4.02 with cube
Click to expand...
Click to collapse
How do you achieved this? I played around with the memory options for 4 hours -> no success

I don't know
but i closed all programs ( also pocketcm)
i removed everything from tomtom and i set the splash screen on disabled
with me no problems and i just have 19 mb free

Update
I am using igo now and it works perfect
i've got a 4 gb micro sd with full europe for igo 8 and full europe for tomtom
so i can use both now
works like a charm
no problems for me

Hi.
Any way to get a link where to download IGO and test it, please?

Titek: buy it or try it in the shop and then buy?

Bucci said:
Titek: buy it or try it in the shop and then buy?
Click to expand...
Click to collapse
That may be a good answer.
Anyway, is there a real difference between Tomtom Navigator and Igo? I got Tomtom on my ARTEMIS and it's quite good but sure, I do not see buildings in 3D.

I have Igo8 on my Artemis (working on Artemis Touch 4.02 Full no cube ROM @ 473 MHz) with full details and some skins and works fine (need at least 16 MB free RAM)
3d buildings
3d maps
realistic textures
full europe maps

Do IGO's maps take a lot of size on Micro SD card's or not? I know that for TOMTOM, maps can be about 100 Mb.

Hi I installed iGO 8 properly. But when it starts I see only blue igo screen and and " INIT API" then the program closes. Does anyone know what should be the problem.
I have Black&Blue 4.1 WWE Rom installed.

Titek said:
Do IGO's maps take a lot of size on Micro SD card's or not? I know that for TOMTOM, maps can be about 100 Mb.
Click to expand...
Click to collapse
full TT europe map with POIs about 1,7 GB
full iGO europe map (including buildings, terrain, POIs) about 1,9 GB

cantilever said:
Hi I installed iGO 8 properly. But when it starts I see only blue igo screen and and " INIT API" then the program closes. Does anyone know what should be the problem.
I have Black&Blue 4.1 WWE Rom installed.
Click to expand...
Click to collapse
what about free RAM before start IGO - more than 16 MB?
Bought version or Downloaded? so much aspect to solve your bug...

Bucci, thanks for your answers so quick
I will give a try with IGO whenever possible

TomTom7 vs Igo 8

Hi,
Anyone tested TomTom7 & IGO8 and is TT7 really that better in graphix in comparison with TT6?
Or is IGO8 still the best with the 3D Buildings?
Any comparisons welcome!
Cheers,
Innovator

iGo8
i didn't notice a big difference with TT7's graphics. but to be honestly,
i didn't use it for a long time....
i prefer iGo because
- single maps for each country
- text to speech (it tells you the streetnames)
- better graphics

petervbeck said:
i didn't notice a big difference with TT7's graphics. but to be honestly,
i didn't use it for a long time....
i prefer iGo because
- single maps for each country
- text to speech (it tells you the streetnames)
- better graphics
Click to expand...
Click to collapse
But do you think that it will work well with artemis and his 200 MHz processor.
I read that the minimum CPU required was 300MHz.
Cheers

Innovator said:
Hi,
Anyone tested TomTom7 & IGO8 and is TT7 really that better in graphix in comparison with TT6?
Or is IGO8 still the best with the 3D Buildings?
Any comparisons welcome!
Cheers,
Innovator
Click to expand...
Click to collapse
TT7 is more accurate when it comes to the speed cameras. But I don’t see an improvement in graphics.

Zecanilis said:
But do you think that it will work well with artemis and his 200 MHz processor.
I read that the minimum CPU required was 300MHz.
Click to expand...
Click to collapse
it's running on my father's artemis and two work colleagues are using it also without any problems.

2 questions
Where can you get Igo 8 from??
Also, how do Igo and TT7 compare with Copilot? The good thing about Copilot is the free speed camera updates. I am using CP6 which works fine but isn't very pretty, and am thinking of upgrading to CP7, Igo or TT7 (cab from this site and buy a map)

Same question here, where to get IGO8?
Thx

petervbeck said:
it's running on my father's artemis and two work colleagues are using it also without any problems.
Click to expand...
Click to collapse
Well i've tried igo 8 on my artemis and the result was not very nice because if you answer any call or want to use pda for any other reason igo will stop running and blocks pda. Same thing appened with igo 2006, for my sadness i was hopping to keep igo instead of tomtom but for that reason i've changed again to tomtom.

Oh I thought TomTom7's graphics improved dramatically, saw some screens, but I guess this was for the Navcore, not for pda's ?
Other question : where can you get the speedcam and other poi updates for IGO?
For TomTom i used POIEDIT (free updates)
Thanks,
Innovator

Innovator said:
Oh I thought TomTom7's graphics improved dramatically, saw some screens, but I guess this was for the Navcore, not for pda's ?
Other question : where can you get the speedcam and other poi updates for IGO?
For TomTom i used POIEDIT (free updates)
Thanks,
Innovator
Click to expand...
Click to collapse
The menu’s in TT7 are better looking and more extended. But the navigation screen looks the same.
Gps connectivity is also better than TT6..

Innovator said:
Oh I thought TomTom7's graphics improved dramatically, saw some screens, but I guess this was for the Navcore, not for pda's ?
Other question : where can you get the speedcam and other poi updates for IGO?
For TomTom i used POIEDIT (free updates)
Thanks,
Innovator
Click to expand...
Click to collapse
POIEDIT free updates?
Am I missing something? I've just had a look at the site and it's £20 including a year's updates. Isn't this the same as getting them from tomtom?

Graphics are not that much improved but it has far more functions than
TT6

TT7 versus IGO 8
TT7:
I think nearly nothing has changed. It's a little bit slower than the previous version.
The maps have a few more details.
IGO8:
If you really want to try this navi, you need a lot of free ram!
I have changed to Vanilla 4.02. And since that I have enough ram to
use IGO. Otherwise IGO is rather slow and unstable.
The advanced features (3d-buildings, a.s.o.) are also only available if you have
enough free ram!
The CPU is no problem - it works very smooth with my Artemis!
bye
peter

I think I'll stick to IGO8, best graphics (and it's not slow on my P3300 as some experience).
I used the latest Artemis Touch Lite (without cube) and now the the Oops Black, both fast enough.
For the person that thought poiedit was not free, see :
http://www.poiedit.com/downloads.htm
You can even update poi's through wifi directly from your P3300 (pocketpoi).
Just saw it also works with IGO8, so i'm going to re-install
Cheers,
Innovator
peter_fuchs1 said:
TT7:
I think nearly nothing has changed. It's a little bit slower than the previous version.
The maps have a few more details.
IGO8:
If you really want to try this navi, you need a lot of free ram!
I have changed to Vanilla 4.02. And since that I have enough ram to
use IGO. Otherwise IGO is rather slow and unstable.
The advanced features (3d-buildings, a.s.o.) are also only available if you have
enough free ram!
The CPU is no problem - it works very smooth with my Artemis!
bye
peter
Click to expand...
Click to collapse

What is the right version of Tomtom 7 for Artemis:
the VGA one or QVGA one?
(I'm using Meschle Artemis touche 4.02)
Thank you for your reply
Cyril

Skyjouby said:
What is the right version of Tomtom 7 for Artemis:
the VGA one or QVGA one?
(I'm using Meschle Artemis touche 4.02)
Thank you for your reply
Cyril
Click to expand...
Click to collapse
So what screen you have? VGA or QVGA? If you're running Meschle Artemis rom, I would say QVGA

I've currently installed TT6, TT7 and Igo8.
IMHO:
TT6:
stability: 10
easy to use: 10
response speed (menù): 8
response speed (navigation): 8
look&feel: 7
TT7:
stability: 10
easy to use: 10
response speed (menù): 8
response speed (navigation): 7
look&feel: 7
Igo8:
stabilty: 5-6 (at least on my artemis ... I think need some extra RAM)
easy to use: 7
response speed (menù): 8
response speed (navigation): 7
look&feel: 9
Bye

crash98 said:
I've currently installed TT6, TT7 and Igo8.
IMHO:
Igo8:
stabilty: 5-6 (at least on my artemis ... I think need some extra RAM)
easy to use: 7
response speed (menù): 8
response speed (navigation): 7
look&feel: 9
Bye
Click to expand...
Click to collapse
I'm quite sure you need some extra RAM because here on my artemis iGo8 is as stable as a rock. iGo is known for needing quite a lot of RAM (at least 16mb if I remember correctly)

Bart1981 said:
I'm quite sure you need some extra RAM because here on my artemis iGo8 is as stable as a rock. iGo is known for needing quite a lot of RAM (at least 16mb if I remember correctly)
Click to expand...
Click to collapse
I'm running MOSSI meets ANJA31-Diamond Style V1.0 WWE ROM that is very fast and stable.. more I've installed today agenda and some other... after an active sync session (exchange) available Ram drops to about 12 MB and then I can free other 2MB with hibernate... but hardly i can get more than 14-15 Mb. I've tried many roms (officials and cocked) with same results. Maybe unloanding HTC Home should help but for now I'm quite happy with this configuration.
Bye

running Artemis touch 4.02 lite without cube and installed igo8 yesterday.
what an awesome program, running very smooth. much better then tomtom6 or 7
small example, when ur called while in tomtom, u cant switch to speakermode because the callscreen goes away when u pickup. (u have to push the pickup button longer to switch) when u hang up tomtom sometimes wont come back.
With igo8 this problem is fixed. when u pickup u see the callscreen and igo8 still runs in the background giving u directions when u hang up igo comes back.

TomTom On HD

Has anyone heard anything about TomTom on the HD? After watching the french review and her saying it doesnt work, is that because the tomtom 7 on the diamond is locked to the diamond?
I suppose we will never know until someone gets there hand on one?

And I wonder if it is because of applications made for VGA device is having problem on the 800x480 screen.

That may be the issue, however so far I have never seen the Diamond having any problems showing QVGA apps either it just blows them up. But because the aspect ratio is no longer 4:3 this may be an issue --- I can not image that HTC lets this be an issue though since hardly any application is made to suit WVGA.

There are 2 editions of TomTom (QVGA and VGA) as far as I know. The samsung omnia has also a different aspect ratio and the QVGA version works perfect. So I think the VGA version will work also on the Touch HD without any problems.

I have a Toshiba G900 (WVGA Display, 800x480) and I can confirm that TomTom works without problems on non standard screen resolutions.

This has also been confirmed by people with xperia's. It works without a problem!

Would TomTom 6 work on the HD?TomTom6 has worked fine on my HTC Universal, and its resolution is also different to the diamond. Or are there other problems to get TomTom6 work on the HD, like the internal GPS?

TomTom 6 works without any problems.

tomtom for htc diamond
i have tested both the tomtom 6 and tomtom 7 working on on the HTC diamond. It works a treat. Copilot 7 live also works well but the software is a lot older and doesnt pickup postcodes as well as tomtom.

Any more opinions as to screen compatibilty with popular software, like SB Pocket Plus and all the main apps?
Thanks!

Could anybody upload a screenshot picture of TomTom working on a WVGA Display (800x480)?

Alter Schwede said:
Could anybody upload a screenshot picture of TomTom working on a WVGA Display (800x480)?
Click to expand...
Click to collapse
I also would be MOST interested in this as TomTom will be what I put this device to most (when I get it!).
Cheers!

from http://www.portegeclub.com/forum/
this guy was complaning about "Small Font In Tomtom 7"
edit: just found a youtube vid of tomtom on the SE X1
just go to 1:30
http://www.youtube.com/watch?v=OTSWycMOHOY

jaso2005 said:
Has anyone heard anything about TomTom on the HD? After watching the french review and her saying it doesnt work, is that because the tomtom 7 on the diamond is locked to the diamond?
I suppose we will never know until someone gets there hand on one?
Click to expand...
Click to collapse
what do you mean "locked to the diamond"? I used both TomTom 6 and 7 for months on my VX8600

TomTom 7.451 is ok (7.9 ko) but keyboard is very little...

Currently I'm running TomTom 7 on my Touch Pro with maps for version 6.75. Working perfectly. TT 7 was installed from a cab file available on this forum which was extracted from Diamond. Will this same version of TT7 will work on HD with same maps (version 6.75)? I ma not sure what is the extended version of this TomTom i.e., it is 7 but is it 7.45 or 7.9 .... don't know. Tried to find it but couldn't find any such detail. Cab file was taken from Diamond forum on this site.

I run TT 7.910.9185 with WCE map 725.1906 and agree that the street names are too small to read in traffic, behind the wheel. The onscreen keyboard however is just fine, there are two settings small and large.

I have TTN7 installed on my Touch HD, and have inserted the micro sd card from my Polaris that had TTN7 running with purchased v7 (go520) map from TomTom.
I have followed the start up process and when I get to the "select a map" screen, it shows the "Manchester" map I got as a freebie and the "UK & ROI" map I purchased & used on my Polaris. However, when I select either map, TTN7 just closes down. Any suggestions please.

The maps you purchased have been activated for your Polaris only, according to your device ID.

Sorry, but where I find the 7.910 Vga version that see my Htc HD in Tomtom Home?
Thankyou IceMatrix
P.S. Can admin delete the post in software thread

Q: general problem between tomtom and wm6.5?

hi all,
i tried so many wm6.5 roms, but always have problems to run tomtom 7.915 smoothy. The moovement in navigation is lagging and tomtom reacts very slow. Also with the new wm6.5 rom from tomme45i with more than 27mb when starting tomtom the navigation is still lagging.
Can someone confirm this? Is there an solution for this problem?
thanks alot,
John

I didn't notice any lagging. Using the chanvi 21900 build with TomTom 7.915.
I do have chainfire's GFXBoost installed (http://forum.xda-developers.com/showthread.php?t=509704)
Did speed up my trinity
Oh, and also changed some dll that are used to access storage card.
Only problem is that tomtom is killed when minimized no matter if it is excluded in taskmanager or not.
Arjan

No Lag for me on Chanvi, or Tomme45i 23017. TomTom 795.9196 Runs about as quick as my TomTom Rider, except for finding satellites the first time.

It depends on how many POI are displayed during navigation.
Try to disable some and check if it lag.
This already happens to me in the past because all of my POI were selected to display during navigation.

thanks, i will try and report later

i disabled some POIs and now tomtom works good.
But anyway i think that wm6.1 is better for tomtom, because under wm6.1 i can able much more POIs without lagging...
But WM6.5 has it's advantage, especially the Rom from tomme45i. So i stay with wm6.5 and disable some POIs

Advanced Config Tool
John-Wu said:
i disabled some POIs and now tomtom works good.
But anyway i think that wm6.1 is better for tomtom, because under wm6.1 i can able much more POIs without lagging...
But WM6.5 has it's advantage, especially the Rom from tomme45i. So i stay with wm6.5 and disable some POIs
Click to expand...
Click to collapse
Using Advanced Config Tool you can try to change the Glyph Cache parameter.
But as you say the problem may be because of choosing lots of POIs...

adejager1 said:
I didn't notice any lagging. Using the chanvi 21900 build with TomTom 7.915.
I do have chainfire's GFXBoost installed (http://forum.xda-developers.com/showthread.php?t=509704)
Did speed up my trinity
Oh, and also changed some dll that are used to access storage card.
Only problem is that tomtom is killed when minimized no matter if it is excluded in taskmanager or not.
Arjan
Click to expand...
Click to collapse
Does this tool really works with Trinity? someone else tried this tool?

Whilst we are on the subject, is anyone here in the UK using Tomtom 7.915?
Mattster.

IGO Amigo 8.4.2. and EnergyRom on TP2

Does anyone have Igo Amigo 8.4.2.109504 running properly on Touch Pro 2 (with EnergyRom Series 21898 + Sense 2.5 )?
My problem is that Igo is responding, opening and starting, but then when it begins with "Autodetecting GPS Receiver..." ...it actually never finds it.
Any help, suggestion and resolution, maybe?
Tnx

Managed to find a solution myself...may help someone getting same problem with Igo 8.4 not managing to "Autodetect GPS Receiver"...:
go to amigo/save folder...then edit system.ini to add (change) gps configuration to:
[gps]
port="4"
baud="57600
In my case problem resolved and Igo is running.