Develop Bugs

please help me stuck after rom upgrade

Hello,
my universal screen is stuck
after Ivan's (3.5)rom upgrade
i pressed the 2 softkeys and reset button
i got the press 0 to clear memory
I press 0 and then the universal does not start up
plz plz plz help me
I was trying to understand what is mtty tool but never understood
some kind person plz help...
thankyou (anxiously waiting for reply)

corleno said:
Hello,
my universal screen is stuck
after Ivan's (3.5)rom upgrade
i pressed the 2 softkeys and reset button
i got the press 0 to clear memory
I press 0 and then the universal does not start up
plz plz plz help me
I was trying to understand what is mtty tool but never understood
some kind person plz help...
thankyou (anxiously waiting for reply)
Click to expand...
Click to collapse
Iv managed to get into bootloader
I run mtty
my only problem is I have COM1 and COM2 in dropdown
no USB
can some 1 tell me why ??
please

corleno said:
Iv managed to get into bootloader
I run mtty
my only problem is I have COM1 and COM2 in dropdown
no USB
can some 1 tell me why ??
please
Click to expand...
Click to collapse
When it Bootloader mode, there are some words on screen, check if it is minimum v1.00 and above.
When in Bootloader mode, activesync is off, but you can run the upgrade software.

CWKJ said:
When it Bootloader mode, there are some words on screen, check if it is minimum v1.00 and above.
When in Bootloader mode, activesync is off, but you can run the upgrade software.
Click to expand...
Click to collapse
thank you for ur reply
it says v 1.00
activ sync is off
but I donno how 2 set up mtty
because I have only com1 and com2
no USB
i guess i need to get USB>
on screen whn i press enter
but i dont get anything
I tried rom upgrade,
the system says device not recognizable

Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.

CWKJ said:
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
Click to expand...
Click to collapse
yes I finally managed to enable USB
and I use
USB>set 14 0
then I get this
HTCST ÚÈÒHTCEUSB>
I try normal upgrade with ROMUpgradeUt got error 101
now I try with MaUpgradeUt_noID.exe after replacing the 3 files from the country_error folder
I get error saying the upgrade is not designed to run on my device

CWKJ said:
Hope you did not change or delete any previous settings on both PPC & PC.
Just connect your device to your usual working activesync usb port.
Do not use ROMUpgradeUt.exe, use MaUpgradeUt_noID.exe to upgrade from Bootloader mode.
Click to expand...
Click to collapse
Thank you CWKJ
Iv got the system to work again
thanks
I re-flashed with my old O2 rom and no mitty required
just boot loader

You are welcome. Hope it is of any help.

I have the same problem!
But after have this problem, I log in to bootloader and up rom beta 15 again (old rom), after up rom beta 15 finished and everything is ok! I start re up rom (3.5) for again and everything is good! now, i'm running 3.5, it's very very good, faster, bigger memory...! Thanks to Mr.Ivan so much!

quanss78 said:
But after have this problem, I log in to bootloader and up rom beta 15 again (old rom), after up rom beta 15 finished and everything is ok! I start re up rom (3.5) for again and everything is good! now, i'm running 3.5, it's very very good, faster, bigger memory...! Thanks to Mr.Ivan so much!
Click to expand...
Click to collapse
Uv got some bal*s dude
Iv shi* my pants the very 1st time
Im too scared 2 go back..or is it front

Active Sync Problem

HI...i got a T mobile Wizard(i dont know if its the correct name of my device but its d same as k-jam).The problem is i cant connect my device with PC using Active SYnc...My PC detects my phone but when i start ACtive Sync it shows me connecting and after some time it says cant connect.I tried alot i changed the PC i changed the cable but nothing works....Plz need help in this regard....My Rom version is 1.8.10.2 WWE and its an old one....Plz

ahmeed80 said:
HI...i got a T mobile Wizard(i dont know if its the correct name of my device but its d same as k-jam).The problem is i cant connect my device with PC using Active SYnc...My PC detects my phone but when i start ACtive Sync it shows me connecting and after some time it says cant connect.I tried alot i changed the PC i changed the cable but nothing works....Plz need help in this regard....My Rom version is 1.8.10.2 WWE and its an old one....Plz
Click to expand...
Click to collapse
What version of ActiveSync are you using?

well i tried with version 4.5,4.2 and even 3.8..but the problem still exists....any suggestions???

ActiveSync 3.8 can't work with WM5 devices

i tried with 4.2 and again 4.5..but nothing seems to b happend...wat to do now???

Ahmeed,
Use the Troubleshooter in the Help menu for Activesync 4.5; this will test your connections. Most likely scenario is you have a firewall or other security problem that is preventing the phone from connecting.

TMB_XV6700 said:
Ahmeed,
Use the Troubleshooter in the Help menu for Activesync 4.5; this will test your connections. Most likely scenario is you have a firewall or other security problem that is preventing the phone from connecting.
Click to expand...
Click to collapse
I second that.
but below fast support
1) disable your firewall and try to connect, if not o.k
2) on your PPC go to settings>Connections> USB to pc >disable the advanced network functionality.

ahmeed80 said:
i tried with 4.2 and again 4.5..but nothing seems to b happend...wat to do now???
Click to expand...
Click to collapse
Hi,
Did you solve your problem?
If not, did you delete any notifications from your device using either sktools or memmaid?
If yes, it may be the reason you cannot connect. Look at this thread and see if it helps:
http://forum.xda-developers.com/showthread.php?t=302459&highlight=sync+problem

[Q] is my UNI ------- DEAD :( :( :(

hi all
it is been 3 full days now that i am searching a solution for my XDA EXEC to be live again as i used PM - e-mails every thing and YES been through all the thread before posting this thread with no LUCK...
the problem is my UNI was working fine with TML 8.5... great until i tried to downgrade to TML 7. something ... in the middle the active sync suddenly diss-appeared and i had (serial on top of the screen and V1.00 on the Bottom)
ok now YES i have read that it will switch to USB on top when i will connect it to a PC running Win-XP and i will be able to use MTTY ...or update the ROM again after flashing the DOC... but yet again when i connect to my LAPTOP or PC there is nothing on the screen change .... MTTY never gives me the USB option to connect to my UNI's Boot Loader...
i tried each and every thing i read on this forum... but all in vain ... i am a blackberry user but heard some good features of UNI like Terminal window and more so just had the device .. but stuck.....
can anyone just let me know that is there any hope for me in this device or its just another paperweight now ...
waiting for replies
Regards
Zeeshan

whispers1 said:
hi all
it is been 3 full days now that i am searching a solution for my XDA EXEC to be live again as i used PM - e-mails every thing and YES been through all the thread before posting this thread with no LUCK...
the problem is my UNI was working fine with TML 8.5... great until i tried to downgrade to TML 7. something ... in the middle the active sync suddenly diss-appeared and i had (serial on top of the screen and V1.00 on the Bottom)
ok now YES i have read that it will switch to USB on top when i will connect it to a PC running Win-XP and i will be able to use MTTY ...or update the ROM again after flashing the DOC... but yet again when i connect to my LAPTOP or PC there is nothing on the screen change .... MTTY never gives me the USB option to connect to my UNI's Boot Loader...
i tried each and every thing i read on this forum... but all in vain ... i am a blackberry user but heard some good features of UNI like Terminal window and more so just had the device .. but stuck.....
can anyone just let me know that is there any hope for me in this device or its just another paperweight now ...
waiting for replies
Regards
Zeeshan
Click to expand...
Click to collapse
Before you tried MTTY did you remove the sim and sd card? Sometimes that works to make the usb option to show.

notime2d8 said:
Before you tried MTTY did you remove the sim and sd card? Sometimes that works to make the usb option to show.
Click to expand...
Click to collapse
yes i did removed the sim card and SD card from my UNI...
i think ppl are busy and even this thread is having 60 views but only 1 reply.....
waiting for mod.. to look in to this thread ..
regards

open MS ActiveSync - > File - > Connection Settings - > uncheck the column allow USB connections
or end process WCESCOMM.EXE in task manager on your computer !! so MTTY will recognize your device via USB

Hakim Rahman said:
open MS ActiveSync - > File - > Connection Settings - > uncheck the column allow USB connections
or end process WCESCOMM.EXE in task manager on your computer !! so MTTY will recognize your device via USB
Click to expand...
Click to collapse
tried already but my problem is my device is not switching from serial to USB whic it should be when i connect it to USB cable.......

still waiting for some good answers :-w

seems USB connetor on your device is damaged, why you don't try to flash rom via SD/MMC ?? if you interest to try proper follow Guide by tomal at http://forum.xda-developers.com/showthread.php?t=393370&highlight=flash+sd+card

Hakim Rahman said:
seems USB connetor on your device is damaged, why you don't try to flash rom via SD/MMC ?? if you interest to try proper follow Guide by tomal at http://forum.xda-developers.com/showthread.php?t=393370&highlight=flash+sd+card
Click to expand...
Click to collapse
yeah i am also having the same idea .. thanks for solution hakim but the "file not found" error is teasing me on the given link of yours..... can u upload the tool for me here in this thread???

whispers1 said:
yeah i am also having the same idea .. thanks for solution hakim but the "file not found" error is teasing me on the given link of yours..... can u upload the tool for me here in this thread???
Click to expand...
Click to collapse
no problems ! Here tools you want

Hakim Rahman said:
no problems ! Here tools you want
Click to expand...
Click to collapse
yeah hakim i downloaded the tool and followed the instructions but my xda is still in boot loader mood and not even loading from sd i mean not even looking in to the sd card i have tried 3 different cards 128/512/64 mb 2 mmc and 1 sd ... but result in same ...
i more thing i before this happen i used the active sync and was working fine ..i took the device to a repair shop he said the hardware boot loader is to be repaired and will be charged 3000 PKR for that...
any suggestion
regards
Zeeshan

hakim are you still there ????

whispers1 said:
hakim are you still there ????
Click to expand...
Click to collapse
of course I'm still here!! how, what progression there with your device ??

Hakim Rahman said:
of course I'm still here!! how, what progression there with your device ??
Click to expand...
Click to collapse
nothing as yet .. i tried with the tool you posted in your previous post but still the same result the device is not even looking in to the SD card and just getting all the way to the boot loader with "serial on top and V1.0 at the bottom.
is there any hope...?????

Try to flash it with some original WM5 ROM (search for shipped WM5 roms) via SD card method

Win_XP said:
Try to flash it with some original WM5 ROM (search for shipped WM5 roms) via SD card method
Click to expand...
Click to collapse
tried to search for WM5 for XDA with No Luck as only for ATOM is available .....

Have a look on my sig link, you may find it over there

Hi whispers1 !! you'd better try to follow existing guidance on http://forum.xda-developers.com/wiki/index.php?title=Universal_Problems
I wish you be able connection via activesync and can do flash rom again

Hakim Rahman said:
Hi whispers1 !! you'd better try to follow existing guidance on http://forum.xda-developers.com/wiki/index.php?title=Universal_Problems
I wish you be able connection via activesync and can do flash rom again
Click to expand...
Click to collapse
still no luck i tried to exit boot loader but failed with an error saying no USB device found please reconnect...
hakim can you please be specific that if i get my usb post repaired will it be detected by my system?
is there any boot repair in hardware?

what your PC have an anti virus and fire wall is active?? if true, do not be turned on and then try again for connecting your device to a PC

Hakim Rahman said:
what your PC have an anti virus and fire wall is active?? if true, do not be turned on and then try again for connecting your device to a PC
Click to expand...
Click to collapse
yes my pc was having and antivirus and firewall and i disabled both before connecting the device and got the same message that the device was not recognized .....

[Guide]Unlocking Android Protection Code Without Reset Or Root

THIS METHOD WILL NOT WORK IN NEWER VERSIONS OF ANDROID
Click to expand...
Click to collapse
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
Requirements
Links
1.Download Android Multi Tools- Click Here
2.Universal Adb Drivers - Click Here
Click to expand...
Click to collapse
.
.
Now lets begin
1.First unpack the tool.
2.Then install the adb driver.
3.Turn on your phone and connect it to pc via data cable.
4.Now press 1 to check if your device is connected properly.
5.Now if you have pin,password or face-lock please press 2.
6.If you have pattern lock then press 3.
7.Device will reboot and it will be unlocked.
8.If it still shows pattern,pin or password enter window simply simply give any to unlock.
Click to expand...
Click to collapse
.
.
Other action that can be done by this program are below
.
Choice detail
1.check device for check connection of device to pc.
4.reset gmail for reset gmail login after try many time wrong unlock
5.wipe data for reset all data to factory setting.
6.reboot for reboot device to normal mode or exit from adb shell.
7.check device on fastboot mode for check connection of device to on fastboot mode.
8.wipe data / cache on fastboot mode for erase user datat and cache on fastboot mode to resolve freeze,stuk on boot logo or slow down device. That is often found in the cpu spreadtrum sc6280/sc8810.
9.exit fastboot mode for reboot your pc or exit fastboot.
0.go to command promt for entering dos promt.you can use command in this soft folder and can return to the main program by type exit
s.software info for info cpu inside,firmware version and etc.
H.hardware info for determine the ic number of gsensor,touch screen,camera,wifi and more
Click to expand...
Click to collapse
.
.
.
thanks for reading this post
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse

Links
1.download android multi tools- http://d-h.st/rCh
2. universal adb drivers - http://adbdriver.com/upload/AdbDriverInstaller.exe

prantoroy said:
Links
1.download android multi tools-
2. universal adb drivers -
Click to expand...
Click to collapse
thanks
my younger bro face this problem yesterday and today i got ans
will try and update

Jpjayesh said:
thanks
my younger bro face this problem yesterday and today i got ans
will try and update
Click to expand...
Click to collapse
Sure Please Update

Thnks
Sent from my HTC One X using xda app-developers app

chrisb906 said:
Thnks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
hmm. . . gud
share it!!

Unfortunately, I was not at my work machine.
Pranto Roy said:
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
.
.
.
.
.
.
.
Click to expand...
Click to collapse
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer

Tiszaba said:
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer
Click to expand...
Click to collapse
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question

Pranto Roy said:
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question
Click to expand...
Click to collapse
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?

Tiszaba said:
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?
Click to expand...
Click to collapse
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.

Pranto Roy said:
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.
Click to expand...
Click to collapse
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."

Tiszaba said:
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."
Click to expand...
Click to collapse
I'll Get The Drivers

ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI

ghepier said:
ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI
Click to expand...
Click to collapse
If It Recognized Ur Device It Will Work
And Please Add Details
Eg. What Error Message etc.

Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?

Fossil_Sioux said:
Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?
Click to expand...
Click to collapse
That Is The Exact Process
I'll test it On S3

Didn't work on Motorola XT901
Thanks for supplying such a tool, unfortunately I tried it and had the same result has Fossil_Sioux on a Motorola XT901. Phone is recognized and when I select option 2 it reboots, but the lock screen is still displayed. I enter in any random pin and it just prompts me to try again. Any suggestions?

thanks
thanks for your time in posting this information because i find it very helpful

Nice
Nice thread...thnx man.

Devill007 said:
Nice thread...thnx man.
Click to expand...
Click to collapse
Thanks

[HELP] Cannot connect to PC using usb cable.

Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??

It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.

soad26 said:
It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.
Click to expand...
Click to collapse
I searched....and tryed that "enable and disable" method in CustomPFD...i seriously dont wanna factory reset my phone...ohhh....that so bad
EDIT: Oh.nothing works....i think i need to do factory reset...when its done ill post next EDIT if it works

You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.

soad26 said:
You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.
Click to expand...
Click to collapse
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....

Sharp852 said:
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....
Click to expand...
Click to collapse
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.

soad26 said:
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.
Click to expand...
Click to collapse
I did factory reset...now it works like a charm...but while formatting,i rimebered that i forgot to backup my photos.... ...so i dont have my photos now....

Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.

soad26 said:
Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.[/QUOTE
Okay,at least i have some of photos on Onedrive form WP8 .....at least something....okay...so i dont need Full MTP access really.....so just interop unlock from "root tool"...and what to choose? just Interop,Interop+Capability or Win10 Capabilities? and...ive seen on 1 threat what there is option to bring on 5 Quick Access tiles...how to do that??
Click to expand...
Click to collapse

same on Lumia 535
Sharp852 said:
Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??
Click to expand...
Click to collapse
same problem

Having this issue on my Lumia 830. I did the registry changes (tried combo of upper/lowercase for the registry key) and nothing worked.
Eventually, after trying boot mode (the ! window) I am locked out of all my jailbreak apps. I suspect the boot loader (holding the volume key down until the ! screen loads) locked my capabilities.
Oh well. Windows Recovery Tool says there's new Firmware for the 830 (much newer than what's on my phone). Yet another full restore is in the works for me. Hope anyone reading this doesn't make the same mistake I did!