Develop Bugs

Help! Can't connect the device to PC

Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!

oxydiom said:
Hi guys! After upgrading my ROM to "838Pro_HK_ENG_WM6_Upgrade_20070712" I can't connect my device to pc anymore... My PC found it as a "Generic RNDIS" but now it finds it as "Generic Serial"...
My active sync and RUUWrapper cannot find the device... I want to change my ROM. Need help!
Click to expand...
Click to collapse
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Then Use the RUU tool attached! and put your favorite xxx.nbh in the folder
Enjoy~~

Try Start/settings/connections/usb to pc and click or unclick the check mark.

dioxda2 said:
Why didn't you try to force the device to bootloader and try again? DON"T PANIC!!!
Click to expand...
Click to collapse
How can I do it?
norwstman30 said:
Try Start/settings/connections/usb to pc and click or unclick the check mark.
Click to expand...
Click to collapse
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!

oxydiom said:
How can I do it?
I have tried it before, if it is marked : Genereic RNDIS
if not: Generic Serial!
Click to expand...
Click to collapse
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated

dioxda2 said:
boot loader =
side "ok" button + power button, keep pressing (like squeezing), then pick the bottom reset hole for half second then ONLY release the reset, keep pressing the 2 buttons until you see the 3 colors.
OK, please see / read my previous post (scroll up ) tools updated
Click to expand...
Click to collapse
You know! Another problem!
I forced the device to the bootloader but it can't connect to PC. My PC founds a new hardware: USB Drive and cannot install it...
What should I do now??!

Have u installed some someware likes cisco VPN

cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved

cowboy086 said:
Have u installed some someware likes cisco VPN
Click to expand...
Click to collapse
nope!
I searched the net and found a driver, the problem has been solved

Could you tell me what driver you found that fixed the issue?

branden7 said:
Could you tell me what driver you found that fixed the issue?
Click to expand...
Click to collapse
The file "VistaRUU" in the link below:
HTML:
http://www.modaco.com/content/Windows-Mobile-News/252977/RUU-on-Vista-It-can-be-done-the-ultimate-guide/

my device does not connect also. it says the computer does not recognize this usb device?help

naveen said:
my device does not connect also. it says the computer does not recognize this usb device?help
Click to expand...
Click to collapse
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^

dioxda2 said:
1. restart computer, or
2. reset your Hermes, or
3. uninstall Active-sync, then install again (may need to restart PC again),
OK? ^_^
P.S. be sure that you had tick the usb connection option from the activeSync option. ^_^
Click to expand...
Click to collapse
i will try that right now. thank you for the tip
i tired, it did not work. quick question, i called htc for help and they belive the device has failed. i think i have installed some program that is confusing the active sync because it is not completely installed. the program is called netcf something. any feedback would be great!

[SOLVED] Rooting HDC Galaxy Note 2 Mega (MTK6577)

Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Edit:
Rooting this device has been made possible by GT35pro. See posts below.

same problem
KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad

CWM installed and rooted the HDC galaxy note 2 MAGE / MEGA
rebmoe said:
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad
Click to expand...
Click to collapse
I just created the cwm recovery and root. The link is on my blog. The zip file is password protected so be sure to get it from my blog page.
http://gt35pro-mobile-gadgets.blogspot.sg/2013/02/cmw-recovery-english-and-root-for-hdc.html
After you have clockwork mod recovery, use it to flash the root access into the phone.
Have fun!

KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.

londonflu said:
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.
Click to expand...
Click to collapse
The one I got did not have that screen calibration problem. Everything works good. Anyway, root is available now.

Superb!
Thank you for sorting this out!
-KristN91

Extra Guide
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!

S_ft_need_download_all_fail (4050)
I'm trying for several days, but always get this error in the flash tool: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Tried on Windows 7 x64, Windows 7 x32 and Windows XP SP3 (x32). Only on the Windows XP computer I was able to make a backup with Flash Tool using the Read Back option.
When I try to flash the red bar goes to 100% then the error message shows...
Does anyone get this error aswell, and did someone manage to solve this?
Please help, I'm in desperate need for root because I need touch screen calibration.
Thnx!!

YES! SUCCES!! I managed to root my HDC Mage :laugh: Did use another method though, check http://forum.xda-developers.com/showthread.php?t=2160490 if you are interested.
Anyway, now back to calibrating the touchscreen. What tools are good do fix touchscreen issues? I already tried http://forum.xda-developers.com/showthread.php?t=934500, but I still am not satisfied.
Thnx :good:

Just curious, if anyone that owns an HDC, is actually located in the USA?

londonflu said:
Just curious, if anyone that owns an HDC, is actually located in the USA?
Click to expand...
Click to collapse
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app

jg77 said:
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Because I tried to order 5 different phones from China including Fastcardtech; they couldn't ship for some reason; even got an empty box from ZOPO mobile. I ended up buying the BLU here in the US, I'm kind of glad it happened, since now I have an N'vidia Tegra 4 CPU, that runs circles around the dual-core phones.
I did order one more phone on ebay from China, been waiting for 2 weeks now. MAKES ME WONDER IF THEY EVEN ACTUALLY SHIP TO THE US AT ALL?
Thank to Paypal I was able to get refunded everytime.

KristN91 said:
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!
Click to expand...
Click to collapse
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls

thank you

I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls

farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app

jg77 said:
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.

farazafs said:
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.
Click to expand...
Click to collapse
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.

jg77 said:
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.
Click to expand...
Click to collapse
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.

farazafs said:
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.
Click to expand...
Click to collapse
There is something wrong in the layout of the scatterfile. Can you post the logiles of sp flash tool? Just zip them all together.
I have had the exactly the same error with my HDC Mage. I just had to rename a small section of the scatterfile and then it was all good.

[Q] Dead screen, I need screenshots

My HTC One X has a dead screen. The actual OS, lights and touch digitizer work as they should.
I have a lot of documents and photos on the phone that I would love to get off the phone via USB, but I cant quite get to the settings page without a screen.
If there is a way to pull the data off without having to go into the settings and set USB to file transfer, or if someone can send screenshots so I can see where to tap, that would be great.
I need a screenshot of the password screen (keypad), the settings screen all the way until i get to the usb screen, if anyone would please.
Thanks. First thread.

What recovery do you have (a custom one?) You can boot into that and enable ums and then retrieve data.
I may guide you

RE
Mr Hofs said:
What recovery do you have (a custom one?) You can boot into that and enable ums and then retrieve data.
I may guide you
Click to expand...
Click to collapse
Recovery? I dont know what you are talking about, so I believe i use stock. I stumbled upon a different way to get the files off via a hack on a different thread, but its ADB hack. Im a little clueless with this, but if you could guide me that would be appreciated.
The other thread i found is here: http://forum.xda-developers.com/showthread.php?t=1573744

Ah you are fully stock, no unlocked bootloader and custom rom ?
Well at least we can try this :
Download android SDK bundle (Google ) and unpack it to lets say :
C:\android
So we can find it easily ! Navigate with windows explorer to that folder and unfold the folders to a folder named "platform-tools" and check that you have adb.exe inside that folder.
Hold down shift and right click the mouse, select "open command window here.
Now connect the phone and type :
Adb devices in the command window

TehEngineer said:
My HTC One X has a dead screen. The actual OS, lights and touch digitizer work as they should.
I have a lot of documents and photos on the phone that I would love to get off the phone via USB, but I cant quite get to the settings page without a screen.
If there is a way to pull the data off without having to go into the settings and set USB to file transfer, or if someone can send screenshots so I can see where to tap, that would be great.
I need a screenshot of the password screen (keypad), the settings screen all the way until i get to the usb screen, if anyone would please.
Thanks. First thread.
Click to expand...
Click to collapse
well you should follow MR HOFS he will guide you easily but on your request here is the lock screen

RE
Mr Hofs said:
Ah you are fully stock, no unlocked bootloader and custom rom ?
Well at least we can try this :
Download android SDK bundle (Google ) and unpack it to lets say :
C:\android
So we can find it easily ! Navigate with windows explorer to that folder and unfold the folders to a folder named "platform-tools" and check that you have adb.exe inside that folder.
Hold down shift and right click the mouse, select "open command window here.
Now connect the phone and type :
Adb devices in the command window
Click to expand...
Click to collapse
It says "List of devices attached" and nothing else, then goes back to where it was. My phone does come up in "My computer" as drive K, but it cant be opened, probably due to the phone not allowing access, yknow when you hook it up it asks what you want it to do with the USB, like sync or charge, but its defaulted to charge only. But yeah, ADB DEVICES doesnt really do anything as far as I notice.

Then you probably have the problem that usb debugging is not enabled
You are on JB .... do you know how to get the phone on its homescreen ?

RE
Mr Hofs said:
Then you probably have the problem that usb debugging is not enabled
You are on JB .... do you know how to get the phone on its homescreen ?
Click to expand...
Click to collapse
Yeah, but I have no way of telling if im on the home screen or if im tapping the right buttons, which is why i asked for a screenshot. Not trying to sound rude.

Open ddms
Sent from my HTC One X using xda premium

Yeah open ddms ?!? Thats what i call short info.
You got your screenshot. If you are on the homescreen after the pincode the MTP should be enabled and your sdcard should be accessible

RE
Mr Hofs said:
Yeah open ddms ?!? Thats what i call short info.
You got your screenshot. If you are on the homescreen after the pincode the MTP should be enabled and your sdcard should be accessible
Click to expand...
Click to collapse
I tried to enter the code a few times, ive tried ADB every attempt. Ill keep trying until something happens.

RE
TehEngineer said:
I tried to enter the code a few times, ive tried ADB every attempt. Ill keep trying until something happens.
Click to expand...
Click to collapse
I had no luck unlocking the phone. I believe I did, but it still didnt show up on the command prompt.
Im sorry I dont have much knowledge on android, but i presume there is no way to directly pull data from the device, without having to unlock it, correct?
Edit
I dont think the digitizer is functioning anymore. I cannot get any touch response out of it anymore. Is it a goner?

Re
I cant get any response out of it anymore. Am I out of options?

Unfortunately yes.....

RE
Mr Hofs said:
Unfortunately yes.....
Click to expand...
Click to collapse
Alright. thanks for the help though.

Yeah well ! Can't think of any other solution !

Mr Hofs said:
Yeah well ! Can't think of any other solution !
Click to expand...
Click to collapse
I just had one last thing to add.
Sorry for the late reply, but, It still has internet connection and I can install an app from the Play store remotely. I just cant run it due to the broken screen, but, if possible, is there a remote-access app that doesnt require setup that you know of? Or an app that enables file access somehow, Im not sure.
Or im still out of options. thanks again for your attention.

[HELP] Cannot connect to PC using usb cable.

Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??

It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.

soad26 said:
It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.
Click to expand...
Click to collapse
I searched....and tryed that "enable and disable" method in CustomPFD...i seriously dont wanna factory reset my phone...ohhh....that so bad
EDIT: Oh.nothing works....i think i need to do factory reset...when its done ill post next EDIT if it works

You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.

soad26 said:
You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.
Click to expand...
Click to collapse
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....

Sharp852 said:
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....
Click to expand...
Click to collapse
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.

soad26 said:
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.
Click to expand...
Click to collapse
I did factory reset...now it works like a charm...but while formatting,i rimebered that i forgot to backup my photos.... ...so i dont have my photos now....

Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.

soad26 said:
Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.[/QUOTE
Okay,at least i have some of photos on Onedrive form WP8 .....at least something....okay...so i dont need Full MTP access really.....so just interop unlock from "root tool"...and what to choose? just Interop,Interop+Capability or Win10 Capabilities? and...ive seen on 1 threat what there is option to bring on 5 Quick Access tiles...how to do that??
Click to expand...
Click to collapse

same on Lumia 535
Sharp852 said:
Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??
Click to expand...
Click to collapse
same problem

Having this issue on my Lumia 830. I did the registry changes (tried combo of upper/lowercase for the registry key) and nothing worked.
Eventually, after trying boot mode (the ! window) I am locked out of all my jailbreak apps. I suspect the boot loader (holding the volume key down until the ! screen loads) locked my capabilities.
Oh well. Windows Recovery Tool says there's new Firmware for the 830 (much newer than what's on my phone). Yet another full restore is in the works for me. Hope anyone reading this doesn't make the same mistake I did!

Question Nokia g11 Plus, pincode locked screen.

So, I'm ashamed to admit but when setting up the phone for the first time, I set a pin password that I don't remember, I didn't even log into my google account so now the phone just asks for a pin.
Things I've tried:
1: Flash StockROM = I searched the whole internet and the only thing I found was an OTA update
2: Hard Reset from Recovery = The recovery mode in this phone has only 3 poor options, turn off, restart and fastboot
Well gentlemen? brain storm.

HeartOnBlaze said:
So, I'm ashamed to admit but when setting up the phone for the first time, I set a pin password that I don't remember, I didn't even log into my google account so now the phone just asks for a pin.
Things I've tried:
1: Flash StockROM = I searched the whole internet and the only thing I found was an OTA update
2: Hard Reset from Recovery = The recovery mode in this phone has only 3 poor options, turn off, restart and fastboot
Well gentlemen? brain storm.
Click to expand...
Click to collapse
Use Fastboot to reset the phone using TFM tool.

mvikrant97 said:
Use Fastboot to reset the phone using TFM tool.
Click to expand...
Click to collapse
Which option?
I remind you that no google account is connected to the phone, only a pin code

HeartOnBlaze said:
Which option?
I remind you that no google account is connected to the phone, only a pin code
Click to expand...
Click to collapse
You will have to try with each option.

I have the same problem, but I can't find a source for the TFM Tool.
Could you help?

wuschelpopuscheldododoasf said:
I have the same problem, but I can't find a source for the TFM Tool.
Could you help?
Click to expand...
Click to collapse
Here is the link to download it
TFT Unlock Tool For FRP Reset and Flashing for your Qualcomm and Mediatek Devices. Download now!
TFT Unlock Tool For FRP and Flashing your Nokia G10 and G20 devices. DOWNLOAD TOOL - GOOGLE DRIVE LINK 1. Extract the zip file and double click to begin installation. 2. Please enter the password in all caps as TFT and installation will begin...
forum.xda-developers.com

Thanks a lot. I already tried that software, but it doesn't recognize my Nokia G11 Plus, although it's in "fastbootd"
or "recovery" mode. There is no option to factory reset the device

wuschelpopuscheldododoasf said:
Thanks a lot. I already tried that software, but it doesn't recognize my Nokia G11 Plus, although it's in "fastbootd"
or "recovery" mode. There is no option to factory reset the device
Click to expand...
Click to collapse
Please PM me on XDA

wuschelpopuscheldododoasf said:
Thanks a lot. I already tried that software, but it doesn't recognize my Nokia G11 Plus, although it's in "fastbootd"
or "recovery" mode. There is no option to factory reset the device
Click to expand...
Click to collapse
The only reliable way is to either send to Nokia Care or avail some remote service. These random tools aren't going to assist you in resetting the devices.