--------------------------------------------------------------------------------
Hi!
I have i mate JasJar, but there are some problems which are a bit annoying and I will ask you if you can help
Does anybody have problems using BT Jabra 500 working with Jasjar?
I cant hear any of my incoming/outgoing calls nor can I hear a ringing in BT.
Jasjar discover BT and pairing is OK ( just in case I did couple times -no luck)
when I use answer/end button on BT is dialing out but no sound on BT
on other side that I call they can hear my voice but I can't hear anything
Do I need any software to instal in jasjar ???
ROM version 1.13.53 WWE
ROM date 09\23\05
Radio version 1.03.01
Protocol version 42.36.P8
ExRom version 1.13.137 WWE
Please help me out
Thanx
I have BT 500 and have no problems, it sounds like the headset has a problem not the phone.
Also have my own and a client's Jabra 500 working successfully with o2 Xda Execs.
Stupid question I know, but you have tried increasing the volume on the headset buttons?
I did try everything , volume etc , contact jabra and try there sugestion
such as :
could be a pairing issue, or a bad speaker on the BT500. Please try a reset and re-pair of the phone and headset first:
Turn the headset off.
Plug the headset charging cord into a wall outlet.
Connect the headset to the charging cord for 5 seconds.
Disconnect the headset.
Remove the headset from the phone Bluetooth menu.
Turn the phone off.
Remove the battery (and sim card, if removable), and hold out for 5 seconds.
Re-install the battery (and sim card, if applicable) and turn the phone on, but do not touch any settings.
Turn the headset on.
Put the headset into pairing mode by pressing and holding the pairing button until you see a steady blue light. Release the button.
Perform the pairing procedure for the phone.
SIMPLY IS NOT WORKING
try with friend V3 razor and same thing
I also have the BT 500 + jasjar
It just works better than the BT 250 which was my past one.
To be honest, what I have on my jasjar is the new O2 rom upgrade (and that should not do any difference) I think there is something wrong with your jasjar
Maybe you will be forced to try the bad solution HARDREST try the headset with other phones before doing that
i beleive it's the headset that has the problem, since you tried it with another phone.
i have the bt500 with the imate jasjar and also the kjam and it's more than perfect for me, the sound is cristal clear on all the phones i tried on.
maybe you should replace it with a new one.
What I mean is not a factory mistake in the headset
I think the phoen is getting complex and some data have been lost (possible)
By the way, I haven't installed the BT headset fix, yet it works fine.
Hello, I have an ASUS P525, since yesterday, there is no sound in my machine and I'm going crazy. Sometimes, the sounds of the system (screen tap, voices of TomTom, the sound of Media Player) dissapears but I repaired it doing a soft reset. Since yesterday, this soluction doesn't repair the sound. I have done a hard reset and nothing. Even I have tried to reinstall the 3.32 WWE version I have still there is no sound.
If I connect the earphones of ASUS to the jack, all goes good. Theres is sound of TomTom, the Media Player goes and the screen tap, alarms, all. I have installed all the patches of BT, radio 4.5 and WWE 3.32.
I think there is a software problem and not a hardware problem (loudspeaker cable disconnected) becouse when I receive a call, it sounds. But if I hang up this call I can't speak and the other person doesn't hear me. However, if I go to sound systems and play the sound of an incomming call, there is no sound.
When I have reinstall the firmware, I think that the installer Galaxy haven't reinstall the files becouse only have read the Galaxy.cap. I think this becouse there is the same version. I don't want to install French version becouse once I've install it I can't go back to the Enchlis version.
Please, help me, thanks, Goyo.
Goyete said:
I don't want to install French version becouse once I've install it I can't go back to the Enchlis version.
Click to expand...
Click to collapse
Are you sure about that?
This is a faulty 2.5mm headset connector on the PDA
You have shorted contacts in the "headset inserted" detection switch, making PDA permanently in headset mode.
Since this is a hardware fault, dont bother updating software etc. Basically you have two options:
1) Insert/remove headset jack several times. Sometimes it makes dislodged switch contacts properly work again.
2) Replace the unit.
Ingvarr is right, it's a common problem to all PDA audio jack
I have had this problem on the xdaII. If you insert a damaged headset plug into the jack it can screw up the sequence of pins detected as it slides in. It is not as simple as putting a new one in and out (unless your very lucky). I had to get a wire and poke it in there and play with shorting the connectors in different sequences. It took a while but when I got the "magic" combination it went back to normal (and the faulty headset went in the bin).
warning: That device totally lost its ability to make sound without the headset about 1 year later. It may or may not have had something to do with what I did, but if you are worried then take it too a repair shop.
Very thanks to all, I was getting crazy trying several options to solve the problem. In fact, the PDA sounds when a call is entering but I can't take the call becouse I don't hear nothing and the other person doesn't hears me. Yesterday, I was trying to put the headset jack in and out becouse I thought that the problem is whith this (I have read your post now). Another thing about this problem is when I put the headset, the Voice Dialler starts up automatic so the problem is in the jack, you are in the truth...
This night I'll try to put in out the headset in the jack to solve the problem becouse now I haven't the headset with me.
I have sound!!! I have inserted a metalic pin in the jack and the PDA sounds fully of sound... Thanks a lot to all of you, I'm very happy. I was very since friday.
Hey Goyete!!! , don't do more experiments with old headsets
User22 said:
Hey Goyete!!! , don't do more experiments with old headsets
Click to expand...
Click to collapse
Old headsets?, My PDA had crash withe official ASUS headset for the P525 Are you spanish?
Goyete said:
Old headsets?, My PDA had crash withe official ASUS headset for the P525 Are you spanish?
Click to expand...
Click to collapse
Spanish ? , are you jocking ??? , i am the same one that is posting at www.todopocketpc.com !!!
I use the Seidio headset that i bough for my previous Qtek S100 (allready sold), and i didn't have any problem with it.
User22 said:
Spanish ? , are you jocking ??? , i am the same one that is posting at www.todopocketpc.com !!!
I use the Seidio headset that i bough for my previous Qtek S100 (allready sold), and i didn't have any problem with it.
Click to expand...
Click to collapse
Vaya tela, yo tambien me llamo Goyete en Todo Pocket PC. Ya he curioseado y he visto que tienes una P525. Lo que son los foros... Gracias otra vez.
!! Merci !!
I had the very same problem with the sound on the P525
I thought the speakers were KO
But after reading your thread, I insert a wood match in the jack, while playing music. The sound came back instantantly.
Looooooooool
This stuff is so easy !!!
(I did use too a bad 2,5jack some weeks ago, but the sound disapears weeks later...)
Thanks for the help
i saw this problem b4
i had xda2 mini and i had this problem ,so i send it back to O2 .and they send me a new one.after a while i got the same problem ,so i knew that the 2.5 to 3.5 is faulty ,so i got another new pda from o2 .
now i have asus p525 and i dont wanna experiance this again .i am using the original headset only.
BTW the XDA2 mini had better sound and louder then the asus on 2.5 and 3.5 headsets.
I had the same problem but reading your post i resolved, only 1 thing is still bad.
during a call if i try to press the boutton (in the touch screen) speaker on or off nothing happens. i don't know what to do. someone can help me writing where in the registry i have to check if is it all ok?
sorry for my bad english.
horeb
sorry for bumping such a old thread, just recently my p525 is F*cked up again, after removing the headset from the put there's no sound. so i thought it was the old problem, but then i've notice everytime i remove or insert my headset, the voice command would pop up, and no matter how many times i insert/remove the headset the music won't come back on, i've updated it to wm6, anyone have a clue of what's going on?
Same problem
BUt i rezolved inserting inside HF jack a stick of wood, and rotating him. After that , surprise my sound comme back to life.
Hi guys!
I've just suck now with my p525, cause I tried to solder the 2.5 jack slot out of the mainboard, but the sound did not come back
Any hint?
There is no software solution for that???
I wonder if any still has the p525 in hand. The mute speaker is really a defect of the 2.5 mm jacket that I have just resolved. My way is simple: dissemble the phone until the 2.5 mm jacket is exposed, then make a relatively big hole with a lighter heated screwdriver enough to reveal the copper plates that contact with the head of earphone. With a tiny tool or anything, move the copper plates "away from the wall". Done!
Loss of the elastic recoil of the plates is the cause of a mute speaker, not a dective earphone, I think.
Hello, i bought Stereo bluetooth headphones JABRA BT 620s. Connected them to maj Uni and phonecall is OK. But when i want listen music the music is interrupting and sometimes the music going slower and slower. It seems like old gramophone whne u put finger on gramophon record during playing.
I upgraded Uni to Helmi AKU3.5 ver 1.3 and radio to 1.14.10 but no change ...
When i connect these phones to my friends mobil SE W710i it works perfectly ... If i asked about this problem contact centrum of Jabra they said that probably Bluetooth hasnot enough capacity ??? I hope its not truth...
Somebody has some idea how to repair this problem ?
Thank you
Me too
Hi,
had the same problem. I tried several tips published on this forum without any success. I was told by the dealer where i bought it that they also thought it would not work. I could bring it return without problem.
I am still looking for an alternative (BT, Stereo, microphone), preferably in-ear solution. Anyone an idea?
Hi al...
I have a Qtek 9090 with WM 2003.
My problem is as follows:
I bought me a brand new Jaba BT 135 BT Headset, but can't get it to work.
What happens is that the phone finds it but i can’t seem to start it up.
I am able to pare the devises, I even her two short blips in the headset but it still doesn’t work.
Can anyone pleeeeeas give me some hints....
Hello,
I'm using the HTC P3300 PDA and I would like to use it with my older Nokia HDW-3 bluetooth headset. Pairing is succesfull and I can use the headset without a problem. But when I don't use the phone/headset for (example) 30 minutes and I would like to call someone, the P3300 displays a headset symbol, but I can't hear anything through the HDW-3. Turning off the headset and turning it on again will fix the problem...only for a short time. It looks like both devices can connect and work correctly, but after a standby time it doens't work anymore without a headset reset.
Does some recognize this problem? When pairing both, only the "handsfree" profile is available. (No headset profile?). The HDW-3 has always worked perfectly with my Nokia 6600 till last week (before upgrading to the HTC P3300). So I don't think it is defect. The P3300 works great with my Parrot 3100LCD bluetooth carkit, so it is unlikely that bluetooth on the P3300 isn't working correctly. What to do?
Thanks in advance for any reply.
Regards,
Roger