Qtek9000 and Jabra BT 620s - JASJAR, XDA Exec, MDA Pro Accessories

Hello, i bought Stereo bluetooth headphones JABRA BT 620s. Connected them to maj Uni and phonecall is OK. But when i want listen music the music is interrupting and sometimes the music going slower and slower. It seems like old gramophone whne u put finger on gramophon record during playing.
I upgraded Uni to Helmi AKU3.5 ver 1.3 and radio to 1.14.10 but no change ...
When i connect these phones to my friends mobil SE W710i it works perfectly ... If i asked about this problem contact centrum of Jabra they said that probably Bluetooth hasnot enough capacity ??? I hope its not truth...
Somebody has some idea how to repair this problem ?
Thank you

Me too
Hi,
had the same problem. I tried several tips published on this forum without any success. I was told by the dealer where i bought it that they also thought it would not work. I could bring it return without problem.
I am still looking for an alternative (BT, Stereo, microphone), preferably in-ear solution. Anyone an idea?

Related

Jabra BT250

Hi,
Is anyone using the Jabra BT250 with QTEK9090 without problems? if so, what have you done?
I bought this headset, paired it with the QTEK and..... crackling! craclking and more crackling.... the only way i can get a clear sound is when i put the QTEK close to the headset (5-20cm) if it wasn´t sad it would be funny, i have to hold the QTEK next to my ear with the hearset on, if the unit is in my pocket or on the other side of my body... well.... not one word is understood... just crackling! 10 meters haha... it´s a joke!
I can´t believe HTC is selling 1000´s of units with this kind of problems!!!
It´s supposed to be a PHONE!!!! you can´t use the unit because of the low voice issue with the mic, you can´t use the headset because you have also the low volume issue... and you can´t use a BT headset because of all the BT issues... GREAT!!!
vega.
I have problems with my jabra and mda3 - I have to have the phone on the same side of my body as the headset otherwise it's too crackly.
I also have a PDA2K and a XDA2s, and use Jabra 250 and 250V I have the same problems as you. I used the second update from Imate it dose seem to make the Bluetooth More stable, but still you need to hold the phone near your head to stop the audio crackle.
I also spoke with Jabra as Imate are now saying there is a fault with Jabra headsets, The Guy at Jabra had a good larph about that.
Have you read the description???
Hello together,
i think you should read the description of the Jabra carefully.
They write, that you have to put the bluetooth-device on the side of your body, where you put the Jabra on your ear."Because the human body can make interferences."
Second, i think you have paired your device with the jabra in front of you. Don't do that. When the devices will pair, they changes some parameters of frequences. So do that:
Put your headset on your ear, search for devices on the pda, and after you put the code in, put the pda on the position where you will wear it.
After 30sec. look if it is OK! Than test, if it is crackly.
When it is not OK, delete the pairing devices, Reset both of them, go to another place (2m away, because of interferences) and try it again.
So, in the worst case, after 3 times, i have no crackly!
Good luck, Mario
I'll give that a go
..and has anyone seen any benefits with the Jabra250 after applying the second BT patch?
No... it´s the same... after the BT patch or with SuperMario´s tips above the crackling issue continues...
... i phoned JABRA support and they told me that it has something to do with the BlueAngel internal antenna...
...and that it was the same with the XDAII...
what i find strange is that i´ve already read somewere a XDAII user saying that he managed to fix the crackling with his jabra BT250! i don´t think he stated HOW!!!
and again i ask : Is anyone using the Jabra BT250 with QTEK9090 without problems? if so, what have you done? pplllleeeeaaassseee!!!
BT and JABRA - the saga continues
No... it´s the same... after the BT patch or with SuperMario´s tips above the crackling issue continues...
... i phoned JABRA support and they told me that it has something to do with the BlueAngel internal antenna...
...and that it was the same with the XDAII...
what i find strange is that i´ve already read somewere a XDAII user saying that he managed to fix the crackling with his jabra BT250! i don´t think he stated HOW!!!
and again i ask : Is anyone using the Jabra BT250 with QTEK9090 without problems? if so, what have you done? pplllleeeeaaassseee!!!
Re: Have you read the description???
SuperMario said:
Second, i think you have paired your device with the jabra in front of you. Don't do that. When the devices will pair, they changes some parameters of frequences. So do that:
Put your headset on your ear, search for devices on the pda, and after you put the code in, put the pda on the position where you will wear it.
After 30sec. look if it is OK! Than test, if it is crackly.
When it is not OK, delete the pairing devices, Reset both of them, go to another place (2m away, because of interferences) and try it again.
So, in the worst case, after 3 times, i have no crackly!
Click to expand...
Click to collapse
^^ Try That!!
I´ve already tried that several times... tried it again... that tip doesn´t seem to work for me!
i´m getting really frustrated with this...
thanks anyway...
O2 have already admitted the problem with the Jabra BT250, their UK product manager sent me this link which shows the compatibility issues with BT stuff:
http://www.my-xda.com/downloads/Other_Bluetooth.pdf
Tommy

In car bluetooth handsfree

I am looking for some feedback on the various in car bluetooth kits that are available in the marketplace, ie the fully installed kits rather than the in ear jobbies.
I have a Pioneer head unit that offers bluetooth headset features however due to a design fault it is fecking useless, ie the mobile phone can't be within a metre of the head unit unless you are prepared for the caller to put up with terrible interference.
Admittedly for a normal phone this would be of a lesser issue as there is the facility to store numbers on the headset, but as I use a XDA Exec with TomTom, I need the pda where I can see it
I have used an in ear device in the past, but it is bloody annoying.
I have looked at the various Parrot kits, the 3000, 3100 and 3200 all of which would do the job, but I don't know how they fair in reality.
I have used a Nokia bluetooth kit, IIRC CK1W or was it CK 7W that appeared to be a litle flaky when trying to connect to the exec.
Whilst browsing eBay, I have come across these http://cgi.ebay.co.uk/SIEMENS-BLUET...6QQihZ008QQcategoryZ42419QQrdZ1QQcmdZViewItem ,http://cgi.ebay.co.uk/BLUETOOTH-HAN...7QQihZ009QQcategoryZ80085QQrdZ1QQcmdZViewItem http://cgi.ebay.co.uk/MOTOROLA-BLUE...3QQihZ018QQcategoryZ35190QQrdZ1QQcmdZViewItem
So does anyone use any of the above and does anyone have any recommendations?
Cheers and Happy New Year
I have been using a Sony head unit with handsfree, A2DV and AVRCP. Its been pretty good and I have no problems recommending it.
dsen said:
I have been using a Sony head unit with handsfree, A2DV and AVRCP. Its been pretty good and I have no problems recommending it.
Click to expand...
Click to collapse
Would that be the MEX-BT5000? I'm considering getting it for use with my Wizard.
Yes, thats the one.
http://www.sony.com.au/xplod/catalog/product.jsp?categoryId=22000
Hi all,
Seems the most appropriate place to post this.
I recently upgraded my headunit to the Sony MEX-BT5000. It plays CD's, MP3 CD disks, has a good tuner and and AUX in. It also supports bluetooth profiles A2DP, AVRCP, Hands-Free (HFP) and Object Push Profile (OPP - for contacts) and as is supports A2DP and AVRCP (basicically A2DP but the remote control features) you can also play music from your MP3 player, phone or whatever through the stereo. It works fine with my M3100.
The handsfree calling is good and pauses the music when in call but there are bad points which I've not managed to solve yet such as inability to initiate voice dialing from the unit, the call button brings up a Sony phone menu. It also can only store 50 contacts and doesn't automatically sync with the M3100 like my Parrot CK3100 would. This means you need to decide which 50 you want to have on there. You can assign 6 speed dials to the 6 preset buttons on the front.
The sound from this stereo is far better than my previous Sony MP3 stereo and on this alone I would recommend it to anyone. It also comes with an infrared remote which allows you to digit dial, andswer and hang-up etc alongside all the basic stereo functions.
Hope this might help someone looking to buy something similar.
http://www.sony.co.uk/view/ShowProd...n_GB&pageType=Overview&category=ICA+CD+Tuners
Gavin.
I've had the BT5000 since January, and use it with my Wizard. Its BT performance is the best I've ever seen -- it's the best speakerphone I've ever used.
Sony also has a new MEX-BT2500 unit that's about half the price of the 5000, with all the same BT functionality plus an aux jack on the front panel.
Parrot
I am using Parrot, both the ck3100 without the LCD and with the LCD, and since upgrading to Radio 1.15/1.18 have had no issues switching between them and my Jabra X10 BT Headset.
I am using this
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=230142025172&ssPageName=STRK:MEWA:VRI
Works good for me...
Laubscherc said:
I am using Parrot, both the ck3100 without the LCD and with the LCD, and since upgrading to Radio 1.15/1.18 have had no issues switching between them and my Jabra X10 BT Headset.
Click to expand...
Click to collapse
When I experimented with a friend's Parrot unit I discovered that it didn't retrieve the contacts from my Exec, and I couldn't do voice-dialling with it. It worked OK as a hands-free speakerphone but that's about it.
Was your experience better than this? If so, is this because you upgraded your Universal's radio stack?
SiliconS said:
When I experimented with a friend's Parrot unit I discovered that it didn't retrieve the contacts from my Exec, and I couldn't do voice-dialling with it. It worked OK as a hands-free speakerphone but that's about it.
Was your experience better than this? If so, is this because you upgraded your Universal's radio stack?
Click to expand...
Click to collapse
Sorry for the late reply.
Check the Firmware version on the Parrot. You can download the BT updater from their site, and use it to upgrade the firmware of the BT Car Kit. I had the same issue, but after upgrading to the new FW, the issue was fixed.
I have this car radio too.
Works like a champ on my iMate JasJar.

Bluetooth Stereo Headset Problem

Hi all
As this is my first post I just want to say a big thankyou for all the contributers to this site, awesome information and keep up the good work.
I have been running Black Majik on my M3100 for a week or so now and have been really impressed. the only slightly annoying problem I have is with my BT Stereo headset (HTC BH S100) which I have had only a couple of days.
Listening to music and controlling the media player(s) (Audio Manager and WMP) is fine, the problem I get is answering/initiating calls from the headset. After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
I have searched multiple forums but have not found anything of use yet!!
Does anyone have any ideas
Thanks in advance
M.
+1
same problem
please help us
Up ... Same WM6 version, same problem ... with a Nokia BT Headset, and a Sony Ericsson too ...
Thank you.
guess i have a worse problem then. cant hear my phone ring from my BT HS. not that ive tried to figure it out. i can live without listening to music. but it would be interesting to know how everyone is able to hear their phone ring from their headsets. im thinking its because of my headset. i have a moto hs810. does anybody concur?
merlynuk said:
Hi all
........
After a reboot of the phone, the headset works OK for both music and calls, but after turning the headset off/on, the call handling functions don't work although wireless stereo does - its as though the phone loses the headset profile but not wireless stero. Stopping/Starting the BT stack from comm manger seems to reinstate the headset functions but this is frustrating!
..........
M.
Click to expand...
Click to collapse
I have the same problem and I've tried a P3600 and kaiser and the same problem.
As merlynuk wrote the problem seem that the HD lose a free hand function of it profile and only a reset and sometime a pairng od device solve it.
It's for me important to use this function in car or call a voice command but the MTB button seem not work.
bought this HD because belived it would be perfect with a HTC PDA but it's not really.
Do you have some suggestion ?
Do you believe it's better to sell this HD and to buy another ?
Someone know a HD device thet work perfectly as free hand and function as a call, a start a vocal command etc etc work fine ?
Regards
aladino
got the same problem: bought the HTC BH S100 after my touch cruise cause I thought to have no problem with vocal commands, but it doesn't work. music, player control, phone and pairing are perfect but no vocal dialling..
how can we solve this??

Problem with bluetooth A2DP headset

when I connected my JABRA BT620S with my spv m700 and started to play music with windows media player or other mp3 player, at first it worked well, while when I start to move(riding bike),in about 10 minutes, there always breaks happened. the voice firstly got lost, then appeared, then lost again... the gap happened about every 5 seconds.I've tried all versions radio, 3 different ROMs, seemed none of which can solved this problem. Can anyone plz help & give me a tip? Thx!
Try this fix. It gives the A2DP higher priority on the CPU, so that is continuously plays the sound:
http://forum.xda-developers.com/showthread.php?t=284974
However, it is known that A2DP AND Video at the same time is too much for the CPU of P3600. You may experience stuttering.
THANKS. I didn't run A2DP & VIDEO at the same time. Just want A2DP to work when riding bike. Hopefully this works.
A2DP Fix, I am challenged, did it work?
ehe333333 said:
THANKS. I didn't run A2DP & VIDEO at the same time. Just want A2DP to work when riding bike. Hopefully this works.
Click to expand...
Click to collapse
Today I am challenged understanding setting up A2DP on bog standard T-Mobile Vario II
Paired with Sennheiser VMX 100 Bluetooth v2.00 headset
PS: My Hermes device Registry entries match exact those given by Bepe
BT Motorola S9-A2DP Headset no sound
Hi, today I a new stereo BT wireless Headset have bought Motorola S9 (A2DP/AVRCP). According to the notebook he must be compatible with P3600 the Trinity and WM6. First 3 minut. hear I everything clearly, but afterwards start he each time for 2 a 3 seconds stick (no sound).
A someone solution, CAB- update or a well recommendation? Does someone have the same experiences?
dateboy said:
Hi, today I a new stereo BT wireless Headset have bought Motorola S9 (A2DP/AVRCP). According to the notebook he must be compatible with P3600 the Trinity and WM6. First 3 minut. hear I everything clearly, but afterwards start he each time for 2 a 3 seconds stick (no sound).
A someone solution, CAB- update or a well recommendation? Does someone have the same experiences?
Click to expand...
Click to collapse
And? Have you tried the cab I mentioned in this thread? If not, why?
http://forum.xda-developers.com/showthread.php?t=284974
Thanks, great fix !
thank you very much.
A related question:
It seems like bluetooth encrypts my audio files on my memory card. After a while i am unable to listen to them. But other files on the memory card remains fine. Has anyone experience this problem?
rs123456789 said:
thank you very much.
A related question:
It seems like bluetooth encrypts my audio files on my memory card. After a while i am unable to listen to them. But other files on the memory card remains fine. Has anyone experience this problem?
Click to expand...
Click to collapse
No, I guess there is something wrong with your memory card.
Are these WMA files with DRM?

JABRA BT320s

Anyone had any success pairing the JABRA BT320s with MDA 2 and if so, do all the functions of the bluetooth stereo headset work?
Thanks.
Upgrade
Purchased Jabra BT320s and paired with Vario 2 after upgrading ROM. Everything working fine with excellent sound quality. I did not try to pair with Vario 2 on old WM 5.0 ROM so I cannot say if the BT320 would work on this OS.
I DID try to pair a BT320s with my TyTN a while ago, no luck......im going to try again now, as i was quite annoyed it didnt work. Will report back soon.
EDIT:: Gonna need to get a plug adapter as i forgot the dumbasses i bought it from sent an EU power supply and not a UK one...LOL!
from what i remember it was around JUNE time when i tried it, sounds like the bluetooth drivers may have changed since i tried it but it did seem as if the headset was the problem and not the drivers as i have had other A2DP headsets working fine.
Jabra BT320's
Bluetooth can be a real pain at times - with unpredictable results. I cannot begin to tell you how much wasted time I have spent trying to pair gadgets together - so it was a pleasent surprise to find the Jabra's paired first time and functioned as described.
Wishing you LOL.
tange.
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
may be worth a rom upgrade?
i have a 320s (uk version bought from a tmobile shop - their selling them for 25quid) and it works fine on my wm5 spv m700 and is detected as wireless stereo and headset
mrvanx said:
well i tried it again and even on my pretty up to date ROM it only pairs as a headset and not wireless stereo urgh!
Click to expand...
Click to collapse
i had the same issue with this thing ... i did a hardreset and it showed up as stereo headset again. i had to do one anyway...
@all how do you like the jabra? mine is quite noisy ... i use my ugly samsung speakers instead and thinking about buying a 3.5mm adapter for the car.
I have been playing with the bt320s for a few days on different roms for my wizzard. I have been tring some WM5 and WM6 roms for features and bluetooth options. What i found was that I could pair with WM5 but even if it gave me the stereo option it was only in mono. After a google search i found someone mentioing that WM5 only supports Mono.
I then tried a couple of WM6 roms and found that they all supported the stereo correctly.
I then hit a problem as I decided that a ROM i tried earlier had everything i wanted (Diamond). So, decision made, I flashed the rom and tried to pair and it would only pair on headset and not offer the stereo. Very wierd as it worked before????.
I then found a post on another site which mentioned the following with the Bt320s headset.
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
I now have a wm6 rom with stereo bluetooth.
the only problem now is that WM6 closes all my apps when i switch it off and on using the power button.
This seems to be a bug when you enable a security pin in WM6 which i am forced to do via a directpush policy from work. Does anyone know a workaround for this as it is anoying to have your cub/pointui/media player etc close on you and go back to the home screen whenever I use the power button.
*****Orange are selling the Jabra BT320s online for £9.50 at the moment. Well worth the money*********
Quick update, on the latest pandora ROM (Tytn) ..... Its working great.
OhtwoXDA2 said:
1) delete any pairings on the phone.
2) switch of headset
3) plug the charge into the mains
4) put the charge into the headset 3 times for 5 seconds each.
5) Recreate the pairing with the phone.
Sounds wierd but it worked??????
Click to expand...
Click to collapse
Just tried this trick and it work! I have a Jabra BT620.

Categories

Resources