Related
I tried to set up a set of BT Stereo Headphones in a shop the other day to test them. We couldn't get them to go so we could listen to mp3s. I use GSPlayer.
Has anybody done this successfully? How do you tell the Magician (WM5) to output the sounds to the bluetooth headset and not to the normal headphones audio output socket?
many thanks,
Zaine.
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Bewdiful.
Bewdy mate.
Thanks very much, that seems to do the trick. It works with my normal headset now. I'll go back to the shop now and test those other headphones.
The auto toggle seems to work OK as well, btw.
Once again, thanks a million.
Good deal. I gotta try this out. Will this work w/ the Wizard?
It doesn't work with my Magician + BHCS BT Patch...
I've read plenty of threads about this. For Magician, A2DP is WMP only. Doesn't work with anything else.
Mind you, this is what everyone else has said. I have not tested this myself.
I can confirm that, in my experience.
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Ik am succesfull with the standard WMP though. It plays all bitrates, and only rarely stutters... So when I use WMP, I am satisfied!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Works fine, just bad quality sound with Bluetooth.
Well, I tried again in the shop and everything worked fine on my Magician (a T Mobile MDA compact with WM5). However, the sound quality was pretty rubbish. The sales guy reckoned that was a function of Bluetooth.
So, not a winner there. But, I can now listen to my voice recordings and podcasts via my normal BT Headset, which is really handy.
Thanks again to the Frioman - a really useful couple of apps. The toggle is on my Today page now!
Nice triple post! But...
bobgorila said:
Also: WMP is pretty rubbish about its A2DP support. For some reason it'll only stream mp3s within a certain bitrate, too low and it uses the device's speaker.
It won't do non-stnadard sample-rates either, and on most setups it seems to "burp" every few seconds.
Click to expand...
Click to collapse
Yeah, I got this all the time, espically if I fast forwarded and rewound. And I was re-encoding mp3s to different bitrates, constant and variable without much success.
"Damn WMP and it's lack of features! The stupid thing can only play MP3s... and... WMA..."
I did a few test re-encodes to WMA 9 (not 9.1) @ 192 and now I get those burps and crackles every ... ten minutes? Half an hour? Definitly not every... what, twenty seconds to a minute.
If this is a problem for you, try re-encoding to WMA 9 @ 192. I use dbPowerAmp http://www.dbpoweramp.com/
ooff! took me about 2 and 1/2 days to re-find this thread again!! can we get a sticky on this????
used this on my Wizard (aka mda) and my Moto H3 and now can listen to my tv shows on the train w/my bt headset!
thanks!!!
I got a Unable to Open bluetooth audio gateway or something, though my headset is connected...strange.
blue tooth program
thefrioman said:
Cant remeber where i got and who to give props too. but here it is
just run the output all audio to bluetooth and the run the other to turn off
and the auto mode which i havent tested out yet
Click to expand...
Click to collapse
There is three icons one for audio off and one for audio on and one for toggle.
I ran one at a time but after 15 or 20 minutes I loose blue tooth connections and the communications manager freezes and when I click on the blue tooth Icon in settings it does nothing, I have to turn the mda off and then I can listen over the blue tooth again, but after 1or 20 minutes it does it again.
can you help?
help
is there any one out there
BT Audio User Problem
I downloaded BT Audio and installed the three .exe files on my 8525. Soft reset the device and then toggled the audio on.exe. Sound still coming out of the speaker and not the BT headset.
I do have the BT-620's and they work fine (even before the BT Audio install). I am trying to accomplish being able to listen to WM without having to lug the BT-620's around all the time.
I am wondering if having the 620's software is conflicting with BT Audio?
Also, I think to get the audio stream to play to the headset, one has to activate the voice dialing feature from the headset? I can get the sound to play only for a few seconds when I do this. Do I need to de-activate voice dialing? If so, how?
Thanks and Happy Holidays
Wokring great with Plantranics voyer 510
Thanks for such nice software....it is working great in my mda and voyer 510 bluetooh head set.
imate JAM Arabic
Please I am needly imate JAM Arabic for Rom 1.12.00WWE .
Please help me .
and thank's for every .
NIce
Thank you so much, toggle works well, switches to calls and back
very cool.
Hello all,
Thanks for the help you provide in this forum. I am wondering if bluetooth is working for you in the official WM6 rom? My Trinity does not want to recognize any bluetooth devices. I have three - my laptop, my glasses and my headphones. Non are pairing and it says it cannot find any bluetooth devices. In the WM5 rom, it was no problem. Can anyone help?
Best regards,
Gilbert
edit: sorry ignore me
Gilbert said:
Hello all,
Thanks for the help you provide in this forum. I am wondering if bluetooth is working for you in the official WM6 rom? My Trinity does not want to recognize any bluetooth devices. I have three - my laptop, my glasses and my headphones. Non are pairing and it says it cannot find any bluetooth devices. In the WM5 rom, it was no problem. Can anyone help?
Best regards,
Gilbert
Click to expand...
Click to collapse
I'm using with a jabra handsfree BT250v and there is no problem using it - works very well.
Plantronics Pulsar 590A , headset and wireless stereo working perfect.
VM
Infact the WM6 is faster in detecting present of my iTech bluetooth headset.
I just wish they would have fixed their stack to work with Microsoft Voice Command on mono headsets! It always amazes me how Microsoft can take the few great ideas they have and f**k them up! Not that it's entirely their fault but you think they'd have had it working on the more popular devices, especially with those of the company they are always raving about!
any improvement with a2dp at all with wm6?
drewy said:
any improvement with a2dp at all with wm6?
Click to expand...
Click to collapse
OS is moving faster with A2DP activated. I can listen mp3 over WiFi without sound drops.
VM
Bluetooth connection is much faster and better than that of WM5.
No problem in connection to WMP via my Itech Bluetooth earphone.
ckleea said:
Bluetooth connection is much faster and better than that of WM5.
No problem in connection to WMP via my Itech Bluetooth earphone.
Click to expand...
Click to collapse
I have an itech clip II how can I listen to WMP or Destinator navigation sounds through my BT?
Hmmm... Got different experiences, found that bluetooth on new official WM6 has some issues with my HT820 A2DP headset.
1. Every time to start the mp3 will skip first 2-3 seconds.
2. The connection will getting unstable after 30-40 minutes continue playing.
3. Randomly my HT820 will lost connection with my CHT9100, also in the Comm. Manager will showed Bluetooth "disabled", but the blue LED still blinking as usual. Tried to turn it off and on but no success, have to push the reset button to clear out the mass.
Hope this might make you feel better, you are not alone...
Cheers,
katsj said:
I have an itech clip II how can I listen to WMP or Destinator navigation sounds through my BT?
Click to expand...
Click to collapse
It is plug and play.
watchsat said:
Hmmm... Got different experiences, found that bluetooth on new official WM6 has some issues with my HT820 A2DP headset.
1. Every time to start the mp3 will skip first 2-3 seconds.
2. The connection will getting unstable after 30-40 minutes continue playing.
3. Randomly my HT820 will lost connection with my CHT9100, also in the Comm. Manager will showed Bluetooth "disabled", but the blue LED still blinking as usual. Tried to turn it off and on but no success, have to push the reset button to clear out the mass.
Hope this might make you feel better, you are not alone...
Cheers,
Click to expand...
Click to collapse
I am having the exact same issue with my S805's. Both made same time by moto, so similar setup I would say.
Gilbert said:
...My Trinity does not want to recognize any bluetooth devices. I have three - my laptop, my glasses and my headphones...
Click to expand...
Click to collapse
I don't use any Bluetooth devices (sometimes my laptop), can someone tell me what Bluetooth Glasses are???
Thanks
is there still a high cpu usage with a2dp playing? Is the os still usable for other functions?
The CPU usge for a2dp is still high with this WM6 Rom, but it does not drop at all. The usage is
I have Contacts(with 500 entries), Resco File Explorer 2007, calander, phone, and not forgotten the Core Player loaded with the ram down to 19Mb, there is still no drop in the audio. One exception is the touch screen, if you touch and and move with frequency then u will surely experience drop in audio. I am sure we Trinity or D810 user had known this issue since day.
the updated rom seems so far so good. All I have put on is trinity hacks and tomtom so far, so I wonder if it has to do with all the other junk or the update.
its called RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Heya,
for a long time i have been looking for some decent bluetooth stereo headset.
now it has come down to two models. well, actually one only
my choice: motorola s9
and the second possibility: Motorola T820
from reading the comments on amazon on those devices i realize that my phone needs to be A2DP compatible to get the best sound out of the headset.
i use s2p as music player and i know it is A2DP compatible... but is real question is: is my phone (HTC P3300 WM6) compatible with this tecnology
also: if you can suggest any other good headsets, please do so.
key features i seek:
- able to use on my phone and pc
- a2dp
- good sound and microphone quality
a2dp not working
Hi,
I have HTC artemis. I recently purchased wireless bluetooth stereo headsets (Jabra bt325)
I cannot connect it to use as wireless stereo. Its working fine as handsfree. After pairing, I cannot see wireless stereo option. Its Greyed. I know that artemis is A2DP compatible.
But i am sure that headset is fine because I tested it with n95 and it worked fine.
Please give me a solution.
Try this:
Start - settings - connections - bluetooth - and add new device
If your headset is already added, use your stylus and press on the bluetooth headset name until the following menu comes up:
Edit
Delete
Set as Hands-free
Set as Wireless Stereo
Choose no. 4
yes it is.
I'm using Dopod M700 which is the P3300 w/o the GPS module.
It works with dell BH200 BT stereo headset and also the o2 BT stereo earphones.
It works on joint stereo in WM5 and since its now running WM6.1 its real stereo.
Dell BH200
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
sameerbs said:
Hi thanks for the suggestion even after setting the Bluetoot head set as "set as Handsfree" it did not work, as soon as I receive or make a call the head set goes off, looks like its some compatibility with A2DP not sure, if some one has done some development or found a patch to make this work would be a great help
Click to expand...
Click to collapse
might be a specific problem of your headset model.
i use a motorola s9 and it's quite nice. fits nice, does not disturb after hours, controls work fine, calling works fine...
BUT (and there's always a but) it has some major drawbacks i found out. while it's still nice to listen music without wires, i encounter this problems. which MIGHT be due the phone, not the headset... but i have no way to test that.
so, basicly, P3300 + motorola S9 through A2DP:
- insides works like a charm. phone in my belt, headset on. music cuality nice with some small music interrupts every now and then (maybe once per 5 minutes). phone calls nice and i can hear and they can listen me well.
but my oh my when i get on the street...
- constant music interrupts every 15 seconds. i have hang the phone around my neck so it's where my chest is to not get interrupts so often (still get one every 2-3 minutes)
- as the mic is where the ear is, if i have a call, it's impossible to hear me due the background noise. this also applies to the underground/metro. it's not that bad in a bus
and well. without A2DP enabled my music player uses so little resources the phone still works fine...
if A2DP is enabled, the phone gets REAL slow and the battery drain is MASSIVE.
when this motorola S9 break... i'll get another model to test. and when that breaks i'll probably get back to some nice wired ones (unless the CPU issues and the battery drain on the phone gets solved) ... but maybe i actually change the phone before that happens. who knows.
I have been using the Touch Pro 2 for a little while now, and I must say: no regret at all that I've bought it.
But the reason I post here is because I'm having a problem with my car-kit and the Touch Pro 2 when they are connected through bluetooth.
First of all, some data about the car-kit
Car stereo: JVC KD-BT22
Bluetooth functions: handsfree calling and Bluetooth Audio Streaming
Bluetooth version: 1.2 certified
Profile: HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3
The situation:
When I pair the devices I can check two options:
1) Handsfree
2) Stereo Audio
This should be fine, but the problem comes next:
- When I both check handsfree and stereo audio, I don't get any streaming audio (I just hear about one second the song which is playing at the phone), if I call or get called nothing hapenned except the display of the phone showing the caller. The car-kit just keeps playing (for example) the CD.
- When I uncheck the stereo audio, just connecting the handsfree everything works "fine" (some small problems, not mentionable).
- When I only connect stereo audio the same happens as described before: the song which is playing at the phone I hear about one second, and after that it's silenced (the song is still "going forward", but no sound, nor on the phone, nor on the car stereo).
I've tried different set-ups, searched the forums and didn't saw anyone with this problem/no sollution, so I hope someone could help me.
This happened with the Stock Rom and also the custom rom I'm using right now, no difference. When I connect a stereo headphone (from Nokia) through Bluetooh, everything works fine.
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Well, that in a case makes sense...
The carkit also connected to my phone when discovery was turn off. Seemed strange to me already. A little, maybe stupid, question: what do I need to swith off/turn off on the phone so the phone won't connect to the carkit, but that I have to let the carkit connect to the phone?
HTC aware
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
apv245l said:
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
Click to expand...
Click to collapse
I also tried mailing HTC about this problem. The reply wasn't so hopegiving
"We're sorry, but the carkit isn't compatible. Please fill out the form for our technical support team"... Summary: I've not been too lucky with this combination
Hope they might do something about it after all. Me just thinking that Bluetooth = Bluetooth, but it's more complicated than that.
I also have the same problem with JVC-KD-AVX2 streaming audio. couple of times i did manage to get it to work, but once the stereo is turned off and on, i lose the streaming again.
i called HTC and emailed them. one said my stereo is not compatible, but i did have it working kind of.
not sure what the problem is as the touch pro1 worked fine. also my friends N97 worked fine
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
nemo0405 said:
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
Click to expand...
Click to collapse
Sorry for my late reply.
I can't connect/pair the phone using the stereo, to bad.
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
DownNeverOut said:
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
Click to expand...
Click to collapse
Which Pioneer are you using? I'm using the F700, and for some reason it won't mute the radio when in a call. I haven't gotten time to mess around with it much though. Reading incoming texts would be great.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
nemo0405 said:
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Click to expand...
Click to collapse
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
RADRaze2KX said:
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
Click to expand...
Click to collapse
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
RADRaze2KX said:
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
Click to expand...
Click to collapse
Yes i do have diifferent ringtones for contacts and also different pictures. The problem is in the contacts name. When i remove the name and leave it unnamed it works fine.
Thanks for your reply..
Aaron McCarthy said:
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
Click to expand...
Click to collapse
it did not fix my problem but thanks anyway. The problem im facing is that any contact saved with a name wont be recieved on the car kit. while if its left unnamed it will work fine.
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
No, but only tested Plantronics 975. which works fine.
I Have a problem with the bluetooth as well. The connection and pairing are OK but there is no sound coming out of the headset.
I've google it and it seems there is a general problem with the bluetooth audio.
I also have a bluetooth problem.
I paires with my car kit (jvc kd-r711) and after a few seconds i get a error saying "headset disconnected"
I've read similair problems since the froyo update. Anyone else have the same problems?
@johnsten
Yes, I have the same problems with my Volkswagen Golf 6 navi!
At first, the phone connects just fine. No problems at all. Made several calls, phone book is synced automatically. All fine..
But then after some time it gets bugged. When I tart my car, and the systems sais.. phone connected. My desire sais "headset connected", and after some seconds it says "headset disconnected". The Bluetooth connection remains active, but the phone is not in "headset" mode.
The only thing that really seems to fix this problem is a full system swipe, but then I lose all by programs and Angry birds savegames
I really want to get rid of this problem. Any ideas?
Grtz, Ron
similar to jah, only tested the plantronics 975, never had issues
also working well with my Jabra Extreme so far
no problems with Nokia BH-503 and SE MW600
No problem with my SE MW600 either, for 340 SEK (36€) it has everything I need: volume, back, play-pause, forward and mic
No problem with either my JVC-901 car head unit or Sony Ericcson HBH-980 stereo headset
ford focus bluetooth headset issue
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
silvermeanie2412 said:
Hi there, I have a problem with the desire and Bluetooth with my Ford focus.
It pairs fine, but looses connection after about 45 seconds. If you check a task manager you see the Bluetooth process at very high CPU after the disconnect, for a number if minutes.
If you make a call before the Bluetooth drops out it remains connected for the duration of the call !
Tried disabling WiFi etc, makes no difference.
Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731626
I had just the exact problem no problems any more though after this fix I dont know if it was a bad rom flash that screwed something up for me but BT works great now
I have the same problem, bluetooth paired but can not hear anything. I tried over 10 different, but it does not help. Can anyone solve this problem?
I'm having a similar problem with my car stereo & HTC Desire bluetooth connection.
I have a Silvercrest stereo with blutooth which worked with my provious Nokia & Blackberry but cannot get it to work with my Desire (2.2 Froyo)
The 2 devices will pair but when I try to make a call or receive a call the devices disconnect.
I am not at all savvy about flashing ROM's or anything so as simple a resolution as possible please...(& no, changing my car radio is not an option )
Any info is greatly appreciated as I spend a lot of time in the car & need the hands free
Bluetooth problem
saayinla said:
Hi all, I have a new Bluetooth headset h680 which I have paired with the desire, its connected and when on a call the person on the other end can hear me but I cannot hear them....anyone have a similar problem?
Click to expand...
Click to collapse
I have a Pioneer 7100bt car radio and a Desire with Leedroid 2.2f and i does the same.
Does somebody know a solution??
I too have a H680 and like you, callers can hear me however, I can hear them but very quietly even with volume full up.
I also have a Jawbone 2 where I can hear callers but they cannot hear me very well.
The Jawbone 2 was fine with previous handsets.
No solution though, sorry.