Develop Bugs

Atom Exec dead after upgrade

I have an Atom Exec with ROM 20060721B1WWE, Radio RS00011. In the seeO2 website I saw an upgrade (Xda Atom Exec ROM Upgrade (ENG) 20060721B1WWE_RS00013) which is the same ROM but different Radio, supposed to improve quality of calls.
Anyway I went to upgrade it, followed the steps until it said it was uploading it and it would take up to 30 minutes. I went to do something else and when came back the pc screen was saying that the process finished successfully, saying that I had to do a hard reset of the Atom, wait for 30 seconds and then soft restart. I did all of that and all I got it's the O2 screen and doesn't go any further.
Following indication on this forum I launched the bootloader (camera button+reset), conected the usb cable, killed activesync and run again the updater.
The DSUU can see the Atom, says 'Device CE image version:0, Device Radio Image version: (blank) to CE Image version: 7210621, Radio Image version: R060822N_MN2ARC_RS00013.
When I click on Upgrade I get an Error message: Connection error, also on the Atom says '!!! Please use DSUU in OS mode and sync with Pc first !!! USB transfer Fail'
The only backup I did prior to this was using SPB Backup, nothing for the ROM. Is there any other way to upload the ROM?
From the Windows/Temp folder I got the files used by the DSUU:
Device Software Update Utility.exe
diskimage_Ver.nb0
EBOOT.nb0
ExtenderRom.img
nova_pda_033105.mot
vl1d_pda_Ver.mot
I've seen in other forums people recovering iPaqs or Axims using these files and software like romupdate, but I'm afraid it could get worse uploading the diskimage_Ver.nb0 as it is.
Anybody knows a workaround for this?

I ended copying diskimage_Ver.nb0 and eboot.nb0 to an miniSD card. Inserted it in the Atom and lauch the bootloader. It recognized the card and Rom file, started downloading it. After that I got few messages saying some files were missing.
Screen went blank and that's it. Now is completly dead, it won't restart or anything.
I'll have to send it to Hong Kong I guess.

P3300 Boot Problem

Please Help
I Have A P3300 And After Changing Rom (had Greek Rom) And I Put The Pdaviet The Pda Can Not Boot.
I Tried With Hard Reset To Make It Boot Again But Even If I Tried Several Times The Result Is Always The Same:
Ipl 3.04.0001
Spl 3.04.000.
Gsm 02.93.90
Os 4.0.0.0
And The Booting Stops There
Does Anybody Can Help?

LINANTONIS said:
Please Help
I Have A P3300 And After Changing Rom (had Greek Rom) And I Put The Pdaviet The Pda Can Not Boot.
I Tried With Hard Reset To Make It Boot Again But Even If I Tried Several Times The Result Is Always The Same:
Ipl 3.04.0001
Spl 3.04.000.
Gsm 02.93.90
Os 4.0.0.0
And The Booting Stops There
Does Anybody Can Help?
Click to expand...
Click to collapse
can you enter the boatloader?

Boot Problem
Unfortunately I Can Not Syncronize It So I Can Not Put The Boatloader

you can go into the bootloader by pressing the voice speed dial button and soft reset your device.
then you will get a 3 collor screen (red,green and blue). if you are in the screen connect your usb cable and you will have a connection so you can update the rom.
first use USPL and after that run the rom update utility

Thank You For Your Help
But I Did What You Told Me I Connected And I Start Running The Uspl.
Unfortunately The Spl Can Not Finish And Stuck Always In 50.
From 30 To 50 The Message Is :cant Spawn Cmd.exe.:no Such File In Directory C:

my ARTEMIS is blocked "BRICK" please help

I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!

brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked

the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick

uspl does not work. this is the point you can not get it.

have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli

my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this

HTC DIAMOND error 262 (UPDATE ERROR)

Hi everybody;
I'm trying to update my HTC DIAMOND.Everything seems ok.Activesync detects my phone.
Image version 1.35.456.3 to i.93.479.3KRM
Then phone goes to BOOT mode;
SPL : 1.35.0000
Then i can see progress bar on phone LCD but it takes few moments and i get "UPDATE ERROR" and it takes me to RECOVERY page.
As mentioned in "READ ME" file:
This error occurs during the CE ROM code upgrade process.
I soft reset and restart RUU but the same thing happens.I changed USB cable and tried on another PC but the same
PLZ help.

I'm using activesync version 4.5

Install Hard SLP!

i had the same problem..
the solution for me was to upgrade the hard spl
so try to use the last version
CU

thanks,i'll try and post result.

p3300 freezing

Hi people
my p3300 keeps freezing after a few seconds on booting, it gets stuck on the boot screen where it displays your spl and gsm versions, also when i put it into bootloader it freezes if im quick enough to attach the usb cable the screen fades away to nothing.
does anyone have an idea i have even tried hard resetting but it says "format failed"
here is my setup
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
my computer is win7 ultimate 32bit
any help will be appreciated

no help at all !
please guys

I have the exact same problem:
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
only exception is that mine agrees to hardreset ... "Format is complete"
I have replaced the battery with a new and charged it before trying to boot.
I can enter the bootloader (this 3 colored screen) but I'm not really sure on what is safe to do from there.
I would prefer to try and put a original ROM from htc.com on the device but they have removed p3300 rom's from the download page
I have not used the device for half a year or so... is it a y2k10 problem ?!

looks like I found the solution.
I managed to put a old rom onto the p3300 from my SDCard described here
wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing