Please Help
I Have A P3300 And After Changing Rom (had Greek Rom) And I Put The Pdaviet The Pda Can Not Boot.
I Tried With Hard Reset To Make It Boot Again But Even If I Tried Several Times The Result Is Always The Same:
Ipl 3.04.0001
Spl 3.04.000.
Gsm 02.93.90
Os 4.0.0.0
And The Booting Stops There
Does Anybody Can Help?
LINANTONIS said:
Please Help
I Have A P3300 And After Changing Rom (had Greek Rom) And I Put The Pdaviet The Pda Can Not Boot.
I Tried With Hard Reset To Make It Boot Again But Even If I Tried Several Times The Result Is Always The Same:
Ipl 3.04.0001
Spl 3.04.000.
Gsm 02.93.90
Os 4.0.0.0
And The Booting Stops There
Does Anybody Can Help?
Click to expand...
Click to collapse
can you enter the boatloader?
Boot Problem
Unfortunately I Can Not Syncronize It So I Can Not Put The Boatloader
you can go into the bootloader by pressing the voice speed dial button and soft reset your device.
then you will get a 3 collor screen (red,green and blue). if you are in the screen connect your usb cable and you will have a connection so you can update the rom.
first use USPL and after that run the rom update utility
Thank You For Your Help
But I Did What You Told Me I Connected And I Start Running The Uspl.
Unfortunately The Spl Can Not Finish And Stuck Always In 50.
From 30 To 50 The Message Is :cant Spawn Cmd.exe.:no Such File In Directory C:
Related
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
uspl does not work. this is the point you can not get it.
have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli
my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this
My Device
T Mobile compact 111 (HTC P3300)
IPL 1.13.0001
SPL 1.13.0000
GSM 02.49.90
OS 3.4.0.0
I have spent hours and hours reading the form and following instructions on how to fix my device but without success.
First the device was stuck on the startup T-mobile Logo screen
Then after using mtty.exe and following instructions The device was then stuck on the boot loader screen. I have tried RUUWrapper and Hard-SPL-V7 but no joy – couldn’t get any connection to my device
I then tried Hard-SPL-v9 which did actually connect to my device
This changed the problem from ‘stuck on the boot loader’ back top ‘stuck on startup screen (t-mobile logo)’ but produced the following error
(ERROR [270]: UPdate Error
The image is corrupted. Please check your Update Utility)
I tried SSPL-HERM on the sd card but nothing!
I searched for “Hard SPL 1.1.3 utility” and didn’t find any utility for this
I have tried the suggested removing the battery soft reset hard reset etc etc
I’ve nearly pulled all my hair out!!! Arrrrrrrrrrrrrr!
Where can I go from here please?
Are there any specific downloads etc?
Many Many thanks
Hi there
The first time that I have attempted to perform the upgrade to a cooked rom and everything has gone horribly wrong.
A reset (using the pin hole) gives a blank display. Nothing at all.
A hard reset (using pin hole and soft keys) gives the option to perform hard reset by pressing Yes. This then gives HTC logo screen and then system hangs after displaying
IPL 3.13.0001
SPL 1.11.0000
I can go into bootloader screen (pressing two side buttons) and can connect USB. When I try to install factory ROM or any cooked ROM it stops at 2% and gives me an error saying
Error 228 - Invalid File Size
Is there anything I can do to save my device?
Please help.
are you sure that you have the right factory rom?
must be the one that was on your device when you bought it!
had the same problem! flashing with original rom solved it!
Yes - this is the WM5 rom that I had orginally before upgrading to WM6.
Bricked P3300
try and remove the minisd card
that must be the cause
cheers
jayzd1
Bootloader is not just by pressing two buttons. Press both the buttons and make a soft-reset. When the tri-color screen appears, connect to USB and perform the ROM upgrade again. If it fails, perform the upgrade with a factory ROM. This will bring back your device to working condition.
Next time before flashing, make sure you have applied Hard SPL once.
Regards,
Carty..
Hi people
my p3300 keeps freezing after a few seconds on booting, it gets stuck on the boot screen where it displays your spl and gsm versions, also when i put it into bootloader it freezes if im quick enough to attach the usb cable the screen fades away to nothing.
does anyone have an idea i have even tried hard resetting but it says "format failed"
here is my setup
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
my computer is win7 ultimate 32bit
any help will be appreciated
no help at all !
please guys
I have the exact same problem:
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
only exception is that mine agrees to hardreset ... "Format is complete"
I have replaced the battery with a new and charged it before trying to boot.
I can enter the bootloader (this 3 colored screen) but I'm not really sure on what is safe to do from there.
I would prefer to try and put a original ROM from htc.com on the device but they have removed p3300 rom's from the download page
I have not used the device for half a year or so... is it a y2k10 problem ?!
looks like I found the solution.
I managed to put a old rom onto the p3300 from my SDCard described here
wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Hello,
a friend of mine probably bricked his Artemis. He tried to flash, but did not HSPL first. Now the device can enter only bootloader. I tried many USPLs, MTTY, micro SD but nothing worked.
The version of SPL is 1.14, active sync does not go green after connecting, but if I try to flash, it is recognized and returns Error 300. I guess I need the original ROM, but it was in czech and I cannot find it anywhere.
Any ideas are very welcome.
Thanks in advance.
parizek said:
Hello,
a friend of mine probably bricked his Artemis. He tried to flash, but did not HSPL first. Now the device can enter only bootloader. I tried many USPLs, MTTY, micro SD but nothing worked.
The version of SPL is 1.14, active sync does not go green after connecting, but if I try to flash, it is recognized and returns Error 260. I guess I need the original ROM, but it was in czech and I cannot find it anywhere.
Any ideas are very welcome.
Thanks in advance.
Click to expand...
Click to collapse
for SPL Artemis you can try this and to l his official ROM you can look at -> http://www.shipped-roms.com/index.php?category=windows mobile&model = Artemis but first try to him that your friend's device hardreset !! like this way :To perform a hard reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
thanks for ideas. HR cannot be made - returns error like "cannot format partition".
On the shipped ROMs site I cannot download anything - it only says something about redirection on ppc geeks
Here I attach the screen, what I get after trying to flash..
...
only the original rom will bring your device back to life.
whats your red numbers and letters at device start-up?
I can get only to bootloader, so the IPL : 1.14.0001 and SPL 1.14.0000 , that's all I can get
hmm, after a communication with official HTC servise in Czech Republic I got the number of original ROM and successfully downloaded it.
But still the same issue. Is it possible, that Bootloader is corrupted ? The guy told me that it is the only possible cause, if this ROM does not work
...
Try this original rom..
The bootloader of this rom matches yours..
(1.14.0000)
1. Put device into bootloader
2. Connect device to PC
3. Run the RUU
4(a). If this does not work, then you are stuck in the mud..
4(b). If that original rom does work, then click here for USPL 1.11.CMON
Good luck!
Rn
Hi,
thanks man for all the ideas. Unfortunately the ROM you are hyperlinkinkg I have already tried with no success. I have given it maximum, now I am giving it up.
Thanks for your patient help.
p
ME to in same problem plz help IPL 3.04.0001 and SPL 3.04.0000