Keep loosing connection during the rom update - 8525, TyTN, MDA Vario II, JasJam ROM Development

When I try to apply the WM 6 ROM I lose my connection when it displays the "Updateing the ROM image on your PDA Phone..." - the activesync connection closes and the screen on the pda goes black. After about a minute I get ERROR [260]: CONNECTION
Cingular 8525
Windows 2000 PRO
ActiveSync 4.5

Try using another usb port in your computer.

Disable ActiveSync's use of the USB port (under Connections I think). Reboot.
Worked for me after I bricked my unit because of the same problem.
Recovered, of course

Just use the sd-card flash. Works always and fast!!!

Had the same problem I found out that if i change my USB port it works fine. I've also changed my usb cable - and now it works on every USB port in my pc

Related

Wirless Modem (USB) Problem...

o2 Exec running the iMate ROM, when I start the Wireless Modem, it displays 'COM OPEN ERROR' instantly, as if it cannot access a COM port.
Is there a setting I need to change, by the way this is without the device connected to the PC, and therefore is not to do with the USB port being used by ActiveSync
It is probably due to something using the port. Do you have GPS software running? Simply resetting the unit may fix it. You can also download a task manager here: http://www.phm.lu/Products/PocketPC/TaskMgr/
Kill off some processes and see if that opens the ports up.
Delete all com ports under bluetooth set-up.
hi will someone be kind enough to upload the usb modem drivers as I don't have my cd with me and need to download the drives to my exec then transfer them to my laptop and then get connected,
thanks
MDA Pro USB modem driver
thanks mate

i780 usb and activesync problem

Hello!
First, sorry my bad english
I have bought my samsung i780 just for a week. I would like to connect it to my laptop to update the contacts and save the pictures. I installed the ms activesync 4.5 and plugged in the data cable (type: APCBS10BBE and also tried APCBS10UGE). The windows sent me an error message about could not recognise the phone. I have not installed any specific usb driver. I tried plug in and out the cable more times (about 10-15) and once there was a success, the synchronisation was fine. Everytime when i try to connect, i have to repeat the plug in/out procedure about 10-15 times... I am afraid, this is the i780 usb connectors fault Is there any other possibility to fix the problem whithout change the connector?
Could you be so kind to give me some advices?
Thanks
TSanya
Try getting a Bluetooth USB Pen...
Thanks, but i've already tried the bluetooth for connetcting to the activesync. The problem is: I can't set up the bluetooth serial port on the i780 to the same as the pc bt serial...
i have this same problem :/ i made hard reset and after it i cant connect :/
having same problem with my i780 I am at a loss, phone is in dutch and I can not load english rom with out usb connection, what should I do?
I had the same problem,but I have fixed it.
I got a i780 with CoinJun's Rom which version was forgot.I often can not sync to my pc.I upgraded the new ROM which version is PDXIB1 downloaded from samsung.Now,it is ok.
i have a big problem. i have a samsung i780 with orange rom (pbvic2), he wont connect to activesync, when i put the cable usb in, he charge, red led is on, the pc make sound connection, on the phone appears "connecting to host" but nothing. And another problem is that he see the sd card, but the computer wont, i try another card, the card reader is seeing , after i put him in the phone he become invisible on the pc, he corrupte them, pls tell what to do, or maybe i need to change the rom? but how ? becausae i have no pc connection...
sorry for my english

S621 Sync issues

Sim/App unlocked S621 can't sync or even connect via USB, which leads me to believe the port might be fried (it still charges), or the installed unlock bugged it?
Used P4 XPSP3/Vista 32bit + Dual Vista 32bit on multiple USB ports and device is not recognized on Active Sync 4.2/4.5 + WMDC 6.1 after re-installs and re-boots?
ROM ver 1.19.631.3 - HTC S621
Tried bootloader screen and multiple provider base ROM's with always a "Error [260]: Connection" response. Completed file wipes and 5+ hard boots.
Using a "SpeakOut" (7-11) SIM and have loaded other apps on the device via WiFi/IE but need to be able to access FAT32 for business files and would like to 6.1!
Have searched the previous posts extensively.
Please advise and thanks.
GWN - Great White North.
related:
http://social.microsoft.com/Forums/.../thread/73581fb9-7951-465e-8a82-6cb70fcd22e6/
1) Try changing the cable
2) check if the device socket is clean
3) Try with hard reset
Still no sync?
sergiopi said:
1) Try changing the cable
2) check if the device socket is clean
3) Try with hard reset
Click to expand...
Click to collapse
1) 3 x Cable/USB Port operational with Canon Camera and 2GB generic 1.8" player, file transfer and power. S621 is charging on all three but no access.
2) http://s591.photobucket.com/albums/ss351/40two40888/
Documents cleaning of what was dirty port.
3) Tried 3x hard reset and watched USB ports in EVEREST Ultimate which logged the Camera, the 1.8" and the USB mouse, but no init or i/o for the S621?
Still no sync or device access. Any more suggestions?
FYI - I took apart the S621 to clean and after restart it took 1+ hours for the display to return to normal with no discoloration or streaking. Thought I would have to install a new LCD.
Please advise and thanks.
On a hunch try a different Computer preferably XP with active sync to diagnose if it's an OS problem a USB problem?
Could be just that your computer is not recognizing it, to which then could be corrupted driver.
Start by trying different comp.
stylez said:
On a hunch try a different Computer preferably XP with active sync to diagnose if it's an OS problem a USB problem?
Could be just that your computer is not recognizing it, to which then could be corrupted driver.
Start by trying different comp.
Click to expand...
Click to collapse
Sorry for the delay in response. Used XP machine at a local computer store and returned the same result.
1) Used two different USB cables that would not recognize the S621 but would mount the 2GB generic 1.8" player.
2) XP Device manger returned no activity on the port but the battery charge initiated.
Any other suggestions? Half-brick?
Brief Sync
The S621 briefly synced yesterday.
The battery was down to <20% and when it was re-charged to 100% it was recognized by XP, drivers were installed and it synced with Active Sync 4.2.
Was able to read the directory but it then started to unmount and then mount several times and now the device won't sync or mount again after reboots etc.?
Any suggestions?
Still no sync
Still no sync with XP SP3(re-installed) & Vista.
Any new suggestions? Still charging via USB and adapter.
Thnx

USB Device not recognised

I'm trying to set up a sync with my work PC, using a standard mini-USB cable (i.e. not the one supplied with the TP2). My home PC syncs fine using a standard cable, but my work PC is saying "USB Device not recognised" when I connect the TP2.
Does anyone have any ideas for how I can fix this?
TIA
Does your works pc have activesync 4.5 installed on it?
Mine gave a similar error until I put it on. You will need administrator priveledges to install
Yes ActiveSync 4.5 is installed - I was previously syncing with my old phone (Eten Glofish M700)
I just managed to resolve it:
- killed the Activesync tasks in task manager (anything beginning with wce*)
- restarted ActiveSync
- deleted the sync settings from my last phone
- plugged the TP2 in again.
hey presto....

Computer cant recognize my Diamon

Dear Sirs;
Maybe this part of forum not be the proper place for my question but I don't know the poeple more expert than XDA masters.
Since last monday, computer cant recognize my Diamond when I connect it by USB cable and "USB device not recognized" appears. I will be really appreciated if you kindly help me.
Best Regards
Dariush Chegini
Try reinstalling Active Sync/Windows Mobile Device Center.
First remove Active Sync/ WMDC, restart PC and than install Active Sync/ WMDC.
Thanks for your kind attention. I reinstalled Activesync...no change, computer can't recognize the Diamond. My Diamond charges with both charger and computer, USB headphone works but PC can't recognize it....
I'm so confused and will be really appreciated if XDA masters help me.
Best Regards
XP or Vista or Windows 7 or which OS?
I've tried by both WIN XP and Vista.
could be a few possibilities for XP atleast...
activesync - file->connection settings->allow usb connections checked
faulty cable, try another one
faulty port on computer, try another one
driver issue - a difficult one...
i had this on my xp, found out there's something wrong with the cable - phone charging fine via computer USB, but XP says it doesn't recognize the device so doesn't connect to activesync....
good luck
Try on your Diamond -
Start>Settings>USB to PC
Unchek "Enable faster data synchronization"
If none of the above solutions work, maybe a hard reset...
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
dchegini said:
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
Click to expand...
Click to collapse
Try this in order...
1. Connect diamond to pc - it should at least charge as your say, but not detect Activsync
2. Goto Settings > Connections > USB to PC
3. Check Allow USB Connections > Uncheck allow fast data sync...
Does it connect?
if not and if you are using Vista
1. goto Windows Mobile device Center
2. check the attached image to see you have the same settings...
Does it connect?
if still not, then it could be driver issues, which I can suggest, once you reply to the above...
Thanx for your attentions. I've tried uncheking the said bottom but no change.
I used to connect the Diamond to the same notebook without any problem for more than 16 months, but the damn notebook stop recognizing my Diamond these days .
Thanks Millions
Dariush
may be usb port on your computer is malfunction. Did u try different usb port?
You need to open device manager in control panel to see how you diamond is listed.
Ever since i started with a new company 3 years ago they have some software that prevents activesync from connecting to any device I have from their computers using USB.
I went Bluetooth method and all is fine. I just use the USB for large, direct file transfer to internal storage.
If you get issues with activesync and usb and can take ages to resolve (if possible).
I guy's.
After a lot of search in this forum and a lot of other forum's, i came to this threat.
I had the same problem, my diamond didn't connect to my pc.
I had tried all the different suggestion, and nothing seemed to work. until i read the post of cloudedhopes, that suggested to change the usb cable. Because it was the only thing that i hadn't tried, i did change the cable, and it worked!
So i'm posting only to thank you guy's for all of the help, given not directly to me, but to all user!

Categories

Resources