Hard reset - P3300, MDA Compact III ROM Development

Hi all,
My pda freezes after boot, on tom's b&b 4.0 splashscreen.
It worked perfectly before, so I want to make a hard reset but I don't know how
Thank you
Regards

Please consider the manual. If not, then here on the forum the best place to start for common questions is the WIKI. Go HERE for most of your answers on the Artemis. Please avoid starting new threads for relatively common, probably-already-asked questions. That's what the WIKI is for.
Regards,

Release the soft reset button and keep pressing the soft keys.
Click to expand...
Click to collapse
Thank you, but what's soft key ?
I just succeed in entering bootloader mode

you can look here http://www.pdashop.nl/images/product/image.php?id=47079

Image seems to be deleted

image seems to be deleted

That's ok sorry for double replies I found my answer ^^
Thank you

The 2 softkeys are the buttons that operate the calendar and contacts menus. Hold both down together and soft reset with stylus in hole - press green call button when text appears.

Related

Artemis Touch 3.01 WM6 WWE ROM hard reset

I am having problems doing a hard reset with this ROM on an O2 UK Orbit. I have tried holding in the two sofware uttons whilst restting the device and nothing. There is no 'Clear Storage' icon either.
Short of a re-flash is there any way this can be done?
Try to re-flash your rom...
MaskedMarauder said:
I am having problems doing a hard reset with this ROM on an O2 UK Orbit. I have tried holding in the two sofware uttons whilst restting the device and nothing. There is no 'Clear Storage' icon either.
Short of a re-flash is there any way this can be done?
Click to expand...
Click to collapse
Try:
1. Pressing the voice record/command button on the top left side
AND
2. 'Poke' the reset hole at the lower left side firmly till you hear/feel a soft click.
THEN HOLDING THE VOICE COMMAND KEY DOWN
3. Release the stylet... you can release the Voice key once you see the HTC logo
Hope it works.
have you tried holding the 2 soft keys down, then push the soft reset button, whilsts tsill holding down 2 soft key buttons? it should then show you whether you want to hard reset or not?
Clearstorage is still there - goto \windows\clearstorage.exe with file explorer
meschle said:
sorry not on the forum as dad is ill in hospital
Click to expand...
Click to collapse
Best wishes to you and your father hope he gets well soon.
I lost my dad recently so know where your coming from.
meschle said:
Clearstorage is still there - goto \windows\clearstorage.exe with file explorer
Click to expand...
Click to collapse
Ah, just no icon to stop accidental use!
Thanks!

Artemis doesn't boot after langauge support uninstalling (details inside)

Hi, I'd really appreciate any help.
I recently bought the P3300 and installed Hebrew language support. After uninstalling it the phone restarted itself, and since then it gets stuck on the "windows mobile" logo screen. I tried installing any possible ROM I could find via the bootloader screen, but with no success. With each ROM I've tried a different error message came up. I also tried to use the USPL.exe but it couldn't detect the phone.
IPL 3.07.0001
SPL 3.07.0000
GSM 02 69 90
OS 3.7.00
WM6
Thanks in advance.
Let find the Original rom and flash again. good luck
Do a hard reset!
Press and hold both soft-key buttons, stick the stylus in the reset hole, release reset and wait for bootup to begin before releasing the soft-key buttons.
As I recall you get a confirmation screen.
sandoval said:
Do a hard reset!
Press and hold both soft-key buttons, stick the stylus in the reset hole, release reset and wait for bootup to begin before releasing the soft-key buttons.
As I recall you get a confirmation screen.
Click to expand...
Click to collapse
Thanks for the tip, it worked

[TRBL]My diamond hangs before booting

If someone could help me with the following:
I tried to flash dutty's new rom, which got me an error in the update utility (cant really reproduce it).
Then I got a rainbow screen, and I tried to flash a differt hard spl.
Now my Diamond hangs in the black "TOUCH diamond" screen, with some red text about R,G,D in the bottom.
Please help me, dunno what to do.
I have the same trouble.
Is there a way to boot the phone to the color screen so i can reflash an image ?
/Edit:
I found the answer on the forum
rameses said:
I had to hard reset my Diamond a few days ago.
Press and hold volume down and the action key,
press and hold for a few seconds soft reset button with the stylus (while still holding volume down and action),
release soft reset button but keep the others pressed until the message appears on the screen.
Once the message appears you either press volume up to hard reset and leave internal storage intact or volume down to hard reset and clear internal storage.
If you get the timing wrong the phone will just soft reset and you will need to try again. It took me about six goes to get it right.
Click to expand...
Click to collapse
know what you are doing!!
Brick Alert.
People before flashing, updating radio or doing something fancy, read the tutorials, follow them step by step, if any doubt arise do some research. If not ask someone on the community.
We are all getting tired of answering these kind of question because there are a lot of how-to's and tutorials. If you just go rush flashing your device you might brick it rendering your warranty void.
So dont risk your expensive device and do some research.
Best Regards and good luck.
By the way, your device is not dead, so dont worry.

Revive URGENT PLEASE VERY URGENT

Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Anybody help me ?
Please it's very urgent...
thanks all
can you do a hard reset using the keys and see if that allows the device to boot again ?
reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm
Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.
hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks

hard reset touch pro2-please help-i cant do it

hello to you all all the member here
i buy htc touch pro2 from us 2 weeks ago,and i install hebrew program into it.
after i install it, it ask me to make soft reset then i did it and after that all i see it black screen with the word HTC on it.
its all i can see now. i was trying to make again soft reset maybe it help but nothing is moving there.
i was trying to make hard reset by presing there and all i see is 4 COLORS AND IT SAID DOWN THERE THE WORD SERIAL and there it stop.as i can know it must move to another screen to ask me if i want to delet and then press volum up then he make the hard reset but he stuck on the screen where is the 4 color.
i realy dont know what to do now.
please, if some one know what to do please help me with it.i realy love this htc pro2.its realy beautiful.
its my first time sending here anything and asking for help.
please help me !!!!!
yours
read the wiki
all that info is in the wiki, but here goes; with the phone OFF press and hold the send and end buttons then press the power button. follow on screen instructions
i just want to make sure you get what i ask
hello members all
i know the things about hard reset, im asking about what i have now in my htc.why i cant do hard reset?
for now i see in my phone the word HTC ON BLACK SCREEN.
i press to make hard reset but not responding anything.
even i cant connect to pc with the phone.
when i make soft reset i see same word again HTC.
ALL THAT HAPPEN WHEN I INSTALL THE HEBREW FILE THAT CALL PARAGON.
so what shell i do next ?
i cant put new rom , i cant make hard reset, i cant connect to pc.
and i have this phone only for 2 weeks.
all i see lots of people here same problem with TP2 to make hard reset.
is that the problem with that htc or what ?
yours
prince !!!!!!!!
1. While the HTC Touch Pro 2 is off, press and hold Talk/Send, End and Power until you see a message on the screen about deleting all data.
2. Release the buttons after the message appears.
3. Press the Volume Up button.
soft reset your phone, then turn it off and try hard reseting again
Remove the battery first to power it off (if that wasn't clear), then replace the battery and hold in send/end while pressing the power button.

Categories

Resources