Develop Bugs

Hard reset

Hi all,
My pda freezes after boot, on tom's b&b 4.0 splashscreen.
It worked perfectly before, so I want to make a hard reset but I don't know how
Thank you
Regards

Please consider the manual. If not, then here on the forum the best place to start for common questions is the WIKI. Go HERE for most of your answers on the Artemis. Please avoid starting new threads for relatively common, probably-already-asked questions. That's what the WIKI is for.
Regards,

Release the soft reset button and keep pressing the soft keys.
Click to expand...
Click to collapse
Thank you, but what's soft key ?
I just succeed in entering bootloader mode

you can look here http://www.pdashop.nl/images/product/image.php?id=47079

Image seems to be deleted

image seems to be deleted

That's ok sorry for double replies I found my answer ^^
Thank you

The 2 softkeys are the buttons that operate the calendar and contacts menus. Hold both down together and soft reset with stylus in hole - press green call button when text appears.

help !!! hardspl problem

please help me!!! after flashing Unsigned-Hard-SPL-Diamond-OliNex.zip on diamond screen appers this: YOU DON`T HAVE PERMISSION TO USE THIS ROM CODE and phone restart all time. What to do ? Urgent!!!

nobody knows ?

Download and flash another HardSPL. Maybe just a bad flash.......

but how to connect to pc ? phone restarts all time

did you hard reset?

Blazeitup123 said:
did you hard reset?
Click to expand...
Click to collapse
Yes, do a hard reset and wait till you can set date and time. That's where a connection with your pc is made. If mobile device center is connected, flash again the SPL.
Then do the same and flash ROM again.

Big thx to all. Only flashed another rom and problem solved.

Cannot get to set date and time
iXiR said:
Yes, do a hard reset and wait till you can set date and time. That's where a connection with your pc is made. If mobile device center is connected, flash again the SPL.
Then do the same and flash ROM again.
Click to expand...
Click to collapse
Hello,
After flashing, my MDA C4 with HardSPL 1.40 permanently reboots!
I tried Hard Reset, but it doesn't reach date/time screen
It formats itself, restarts and shows splash screen, after few seconds shows Radio/ROM versions on right bottom corner and restarts!
How can I get into flashable mode?

Enter in bootloader. Hold Volume Down button while with stylus press on reset button.

How can I reflash my device directly from bootloader screen???

borce_razor
THANK YOU!!!

the same way as you normally do

Big problem with frozen screen and posible solution dont work, please help me.

First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2

labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?

Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.

For Hard-Reset see sticky "a picture tells a million words"

The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.

labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"

Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.

this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.

boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..

Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks

try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..

dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.

Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???

I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.

try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..

davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.

Bootlooader problem, cannot enter bootloader

HI!
First of all... great forum.
Than.. I''ve got an Arte (SPV M650 from PL orange).
I've flashed it few times, trying to find ROM most fitting my needs.
So please don't answer if U want to teach me how to perform a SR, HR, BL enter. I really know that, i did it few times already
Problem is, that for some time, i can't get into bootloader. I want to flash my Arte again, now with Shady's ROM, but... i can't get into bootloader.
If anybody have a REASONABLE idea for help i would be grateful.
THX I A
sorry for my eng...

Same problem here
Same problem, when i wan t to go in bootloader is showing me a White screen.
Solved in this way: Hope is helpfull
I have a microsd card of 128Mb.
I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.
This is my ay to escape from white screen and entering in bootloader mode.

I have also a big problem
my htc P3300 is blocking at boot menu( white screen ..htc..ipl 1.12.0001 SPL 1.12.0000 GSM 02.67.90 OS 1.12.0.0) i can not succed to make anything. so if you can help me it wil be great.. i also speak romanian so maybe it will be easyer to tell me everything in romanian. thanks alot.

Hi @all, try holding the power and record button and pushing the reset button. than you get into the bootloader. (hold power and record after resetting, too)
now you can practice sd card flashing.
i hope i can help you...
mike

where is the reset button? pls

kingoldstyle said:
Same problem, when i wan t to go in bootloader is showing me a White screen.
Solved in this way: Hope is helpfull
I have a microsd card of 128Mb.
I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.
This is my ay to escape from white screen and entering in bootloader mode.
Click to expand...
Click to collapse
but...i do this and when i on my PDA , report "Invalid Certificate" ... pls help