Bootlooader problem, cannot enter bootloader - P3300, MDA Compact III General

HI!
First of all... great forum.
Than.. I''ve got an Arte (SPV M650 from PL orange).
I've flashed it few times, trying to find ROM most fitting my needs.
So please don't answer if U want to teach me how to perform a SR, HR, BL enter. I really know that, i did it few times already
Problem is, that for some time, i can't get into bootloader. I want to flash my Arte again, now with Shady's ROM, but... i can't get into bootloader.
If anybody have a REASONABLE idea for help i would be grateful.
THX I A
sorry for my eng...

Same problem here
Same problem, when i wan t to go in bootloader is showing me a White screen.
Solved in this way: Hope is helpfull
I have a microsd card of 128Mb.
I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.
This is my ay to escape from white screen and entering in bootloader mode.

I have also a big problem
my htc P3300 is blocking at boot menu( white screen ..htc..ipl 1.12.0001 SPL 1.12.0000 GSM 02.67.90 OS 1.12.0.0) i can not succed to make anything. so if you can help me it wil be great.. i also speak romanian so maybe it will be easyer to tell me everything in romanian. thanks alot.

Hi @all, try holding the power and record button and pushing the reset button. than you get into the bootloader. (hold power and record after resetting, too)
now you can practice sd card flashing.
i hope i can help you...
mike

where is the reset button? pls

kingoldstyle said:
Same problem, when i wan t to go in bootloader is showing me a White screen.
Solved in this way: Hope is helpfull
I have a microsd card of 128Mb.
I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.
This is my ay to escape from white screen and entering in bootloader mode.
Click to expand...
Click to collapse
but...i do this and when i on my PDA , report "Invalid Certificate" ... pls help

Related

bootloader mode ??

Hello! i would like to upgrade my xda 2s do wm2005 xpload and i have read wiki to! but really don't know how looks like bootloader mode! i pressed on/off, camera button and reset and nothing was happend, mda was reset and that is it! upgrade program do not see current software etc! can anyone can help me with that " by hand" please! first time is always hard! please! cheers Jocker01
Well, have you tried "Record"-button instead of "Camera"-button?
(Press and hold "Record", "Power", and "Reset" until bootloader comes up)
hello thx! finally i get bootloader mode, i've pressed camera, record, on/off and reset buttons! i hope so this is bootloader mode( THX Smokkky ). on screen i have dispelyed usb and v2.07. but ultility still dont update rom! cheers Jocker01

Revive URGENT PLEASE VERY URGENT

Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Anybody help me ?
Please it's very urgent...
thanks all
can you do a hard reset using the keys and see if that allows the device to boot again ?
reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm
Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.
hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks

Big problem with frozen screen and posible solution dont work, please help me.

First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?
Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.
For Hard-Reset see sticky "a picture tells a million words"
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"
Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..
Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???
I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.
try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..
davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.

pleas help me, my htc touc diamond doesn't start up

pleas if anybody can help me
after I tried to flas new rom in my htc touch diamond and I failed, my htc cannot start up, it freezes at HTC touch diamond screen
please please please I need help
hard reset it : Low volume + central pad + reset.
But the problem isn't totally solved, it's the same for mine...
yes I have tried it, but still doesn't work
I can't install any rom and I don't know what to do
can you get into bootloader?
reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
if so, you see in the white part of the screen the word 'serial' connect your device to pc and this will change in 'usb'. Now you should be able to flash a ROM, i would go for your original stockROM
go to bootloader, connect with usb and try to flash another rom..worked for me...
or take a look at the mtty thread and please use the search function...
best regards
yes, I get into bootloader, and I sync my phote to the pc
and when the rom start flashing it stops in 0%, I have tried ALL ROMs, but still not work
also I have tried with mtty but still I am desperate
any other option please...
did you perform hardSPL on your phone? (i.o.w. is it unlocked so that you can flash custom roms?)
if not you can only flash a stock ROM
use mtty and flash any rom

Categories

Resources