pleas if anybody can help me
after I tried to flas new rom in my htc touch diamond and I failed, my htc cannot start up, it freezes at HTC touch diamond screen
please please please I need help
hard reset it : Low volume + central pad + reset.
But the problem isn't totally solved, it's the same for mine...
yes I have tried it, but still doesn't work
I can't install any rom and I don't know what to do
can you get into bootloader?
reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
if so, you see in the white part of the screen the word 'serial' connect your device to pc and this will change in 'usb'. Now you should be able to flash a ROM, i would go for your original stockROM
go to bootloader, connect with usb and try to flash another rom..worked for me...
or take a look at the mtty thread and please use the search function...
best regards
yes, I get into bootloader, and I sync my phote to the pc
and when the rom start flashing it stops in 0%, I have tried ALL ROMs, but still not work
also I have tried with mtty but still I am desperate
any other option please...
did you perform hardSPL on your phone? (i.o.w. is it unlocked so that you can flash custom roms?)
if not you can only flash a stock ROM
use mtty and flash any rom
Related
i've flash the Bell rom in my diamond ,i flashed through the internal storage and i think i've brick my diamond. when i turn the phone on, it freeze at the opening screen, anything i can do ? please help
Try to enter bootloader mode and flash original stock ROM upon doing so.
kareem9nba said:
Try to enter bootloader mode and flash original stock ROM upon doing so.
Click to expand...
Click to collapse
thanks for your help, but how can i sync with the computer because i can't turn on the phone?
Dude, press vol down and soft-reset button, the three colors screen it's bootloader, connect the usb clable and wait for "USB" on screen.
Them, flash the ROM.
U can do it that without boot the OS
hummm
you haven't flashed a usa rom to a gsm phone have you
problem solved, great thanks to all
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?
Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.
For Hard-Reset see sticky "a picture tells a million words"
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"
Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..
Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.
Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???
I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.
try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..
davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.
HI!
First of all... great forum.
Than.. I''ve got an Arte (SPV M650 from PL orange).
I've flashed it few times, trying to find ROM most fitting my needs.
So please don't answer if U want to teach me how to perform a SR, HR, BL enter. I really know that, i did it few times already
Problem is, that for some time, i can't get into bootloader. I want to flash my Arte again, now with Shady's ROM, but... i can't get into bootloader.
If anybody have a REASONABLE idea for help i would be grateful.
THX I A
sorry for my eng...
Same problem here
Same problem, when i wan t to go in bootloader is showing me a White screen.
Solved in this way: Hope is helpfull
I have a microsd card of 128Mb.
I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.
This is my ay to escape from white screen and entering in bootloader mode.
I have also a big problem
my htc P3300 is blocking at boot menu( white screen ..htc..ipl 1.12.0001 SPL 1.12.0000 GSM 02.67.90 OS 1.12.0.0) i can not succed to make anything. so if you can help me it wil be great.. i also speak romanian so maybe it will be easyer to tell me everything in romanian. thanks alot.
Hi @all, try holding the power and record button and pushing the reset button. than you get into the bootloader. (hold power and record after resetting, too)
now you can practice sd card flashing.
i hope i can help you...
mike
where is the reset button? pls
kingoldstyle said:
Same problem, when i wan t to go in bootloader is showing me a White screen.
Solved in this way: Hope is helpfull
I have a microsd card of 128Mb.
I put there a image of a rom, and rename it just like in sdcard flashing way "ARTEIMG.nbh". The i press it the tow side buttons ( off and voice ) and with slytus i reset keeping after reset the 2 buttons pressed. is comming in the bootloader mode, but is not flashing the image i put it in card. SO after that I install what rom i want.
This is my ay to escape from white screen and entering in bootloader mode.
Click to expand...
Click to collapse
but...i do this and when i on my PDA , report "Invalid Certificate" ... pls help
I was editing some files in the system with adb. but when i was done with editing i rebooted my phone i got the htc bootscreen and then everything was black.
I tried to do a recovery but when i try to flash it the program stops with pushing the files.
Please help me.
i have bootloader 80
I've just find out that i deleted my entire \system
and for some reason i can't push files into it!
Flash a full RRU image from HBOOT.
Choose the best RRU image for you from the RRU thread in the Desire development forum.
please help.
i try to install froyo rom.
after flash FroYo_inkreDroid (14.07.2010) rom (throught standart flashrom procedures by update.zip) the device will not boot into os. i try update modem and after this the device win not booting to hboot menu.
i try press both combination (back key + power and volume down + power). the result of both combination is: 7 short vibro signals and black screen.
please help me, how me recovery my device.
thnx and sorry for my english.
Romker said:
please help.
i try to install froyo rom.
after flash FroYo_inkreDroid (14.07.2010) rom (throught standart flashrom procedures by update.zip) the device will not boot into os. i try update modem and after this the device win not booting to hboot menu.
i try press both combination (back key + power and volume down + power). the result of both combination is: 7 short vibro signals and black screen.
please help me, how me recovery my device.
thnx and sorry for my english.
Click to expand...
Click to collapse
If the phone don't get any boot menu by key combination than it means that You have damaged boot area and Your phone is transformed into a very expensive brick.
You can try to find someone in Your area to fix it by jtag.
Romker said:
please help.
i try to install froyo rom.
after flash FroYo_inkreDroid (14.07.2010) rom (throught standart flashrom procedures by update.zip) the device will not boot into os. i try update modem and after this the device win not booting to hboot menu.
i try press both combination (back key + power and volume down + power). the result of both combination is: 7 short vibro signals and black screen.
please help me, how me recovery my device.
thnx and sorry for my english.
Click to expand...
Click to collapse
are you seeing ! <---this on all corners? i had this problem but i was able to root the phone and install rom and it fixed the problem.
i used tiny linux method and it worked but had to try it many times
Ronaldo_9, I have this problem -
black screen with ! <---- in each corner.
I have been trying the tiny linux as well - one or twice - but will try it again as you recommend - but - do you think it will work if I do not have a gold card ?
I am a bit at a loss - and posted another thread trying to get assistance
--(Bricked/Broken HTC Desire ? Please help !")