Develop Bugs

Need Some Help!

While tryng to r-flash my phone I must have done something wrong...I followed the required steps. My phone is now STUCK/FROZEN at the spalsh screen. I tried to flash again but I can't because the phone does not sync to the pc. I tried a soft reset, a hard reset by by holding the send/end buttons then pressing rest and nothing...I'm always the stuck in the splash screen. (the phone does not respond at all) Any suggestions on how to fix my issue or get to the bootloader screen..thanks!

You can flash a ROM in bootloader mode so go into it and reflash your ROM.

kareem9nba said:
You can flash a ROM in bootloader mode so go into it and reflash your ROM.
Click to expand...
Click to collapse
How do I flash in bootloader mode...how do I get into it so i can flash?
Thanks for the fast reply.

Hold the camera button all the way down and soft reset the device simultaneously.

you can also just start flashing with a RUU.

kareem9nba said:
Hold the camera button all the way down and soft reset the device simultaneously.
Click to expand...
Click to collapse
Thank you...I was able to get into the bootloader screen and fix my issue.

flash a cdma rom in my diamond

i've flash the Bell rom in my diamond ,i flashed through the internal storage and i think i've brick my diamond. when i turn the phone on, it freeze at the opening screen, anything i can do ? please help

Try to enter bootloader mode and flash original stock ROM upon doing so.

kareem9nba said:
Try to enter bootloader mode and flash original stock ROM upon doing so.
Click to expand...
Click to collapse
thanks for your help, but how can i sync with the computer because i can't turn on the phone?

Dude, press vol down and soft-reset button, the three colors screen it's bootloader, connect the usb clable and wait for "USB" on screen.
Them, flash the ROM.
U can do it that without boot the OS

hummm
you haven't flashed a usa rom to a gsm phone have you

problem solved, great thanks to all

ROM Upgrade Please help

I have a HTC diamond and I replaced the rom with "DIAMIMG-WWEHD", the ROM upgrade was successful, but the phone did not start, Its starting and I am geting the Touch Diamond screen and then its restarts again.
I tired to restore with the vol down, center button and power button, Its shows restore...completed but when I boot I get the start screen and the phone restarts again.
Have I bricked by phone, is there a way to recovery.
Experts ...Please help

Did u Hard Spl your device before begining this process?
Step 1: Hard Reset your device (With the device turned on, press and hold the VOLUME DOWN and ENTER buttons "aka the center button" , then press the RESET button with the stylus tip).
I will discuss the next steps upon your response.
Let me know if this works.

band27 said:
Step 1: did u Hard Spl your device before begining this process? if yes to step 1 then move on.
Step 2: Hard Reset your device (With the device turned on, press and hold the VOLUME DOWN and ENTER buttons "aka the center button" , then press the RESET button with the stylus tip).
I will discuss the next steps upon your response.
Let me know if this works.
Click to expand...
Click to collapse
I tired the hard reset, I got a white screen with a message saying press volume up button to restore phone to manufacturers defaults, when I did that I got a message Restore...Completed Press VolUp to boot.
When I press the Volup button the phoen does not boot, it comes to the Touch Diamond screen and there is not ROM message at the bottom of the boot screen.

Ok, next step:
Go to your (Bootloader Screen): Vol. Down + Soft Reset
If you are successful here then just plug the device into you pc and get another ROM and start the process over by excuting the RUU_
Which Rom did u originally download.
K..let me know if this next step works.

band27 said:
Ok, next step:
Go to your (Bootloader Screen): Vol. Down + Soft Reset
If you are successful here then just plug the device into you pc and get another ROM and start the process over by excuting the RUU_
Which Rom did u originally download.
K..let me know if this next step works.
Click to expand...
Click to collapse
I pressed the vol down button and the reset button on the back, the phone boots and shows the boot up screen with the "TOUCH DIAMOND" banner and stays there for some time and restarts again

mukesh_thiru said:
I pressed the vol down button and the reset button on the back, the phone boots and shows the boot up screen with the "TOUCH DIAMOND" banner and stays there for some time and restarts again
Click to expand...
Click to collapse
Yeh, that is not your Bootloader Screen. Here, do it like this. Soft reset with stylus first....quickly let go of that and press Vol. Down in that order. When u see the Bootloader Screen you can let go of the Vol. Down button.

mukesh_thiru said:
I pressed the vol down button and the reset button on the back, the phone boots and shows the boot up screen with the "TOUCH DIAMOND" banner and stays there for some time and restarts again
Click to expand...
Click to collapse
The phone is booting again and again, only if I remove the battery it can be stopped.

So it won't let you go to the Bootloader Screen then? Hmm...?
So you soft reset it and pressed vol down and it just reboots constantly?

I put the phone in triggered bootloader mode. Thanks a lots guys for your qucik response.
For future refernce, this link can be checked for this kind of issue:
http://forum.ppcgeeks.com/showthread.php?p=650429#post650429

mukesh_thiru said:
I have a HTC diamond and I replaced the rom with "DIAMIMG-WWEHD", the ROM upgrade was successful, but the phone did not start, Its starting and I am geting the Touch Diamond screen and then its restarts again.
I tired to restore with the vol down, center button and power button, Its shows restore...completed but when I boot I get the start screen and the phone restarts again.
Have I bricked by phone, is there a way to recovery.
Experts ...Please help
Click to expand...
Click to collapse
dI have a HTC diamond and I replaced the rom with "DIAMIMG-WWEHD", the ROM upgrade was successful, but the phone did not start, Its starting and I am geting the Touch Diamond screen and then its restarts again.
I tired to restore with the vol down, center button and power button, Its shows restore...completed but when I boot I get the start screen and the phone restarts again.
Have I bricked by phone, is there a way to recovery.
Mukesh i have one solution for that download hspl package from here http://ds8.fileflyer.com/d/e3858be1...c/u56S/js0hkAj/diamond-hspl-1.23-and-1.24.zip extrace in other folder in ur pc than just connect ur phone to ur pc via cable and just click on dimond-sspl ms-dos batch file than follow the steps ur phone will connect via cable than follow this step 1. download unsigned hard spl v .1.93 olinex from here http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip extract in other folders than connect ur phene via active sync than run Ruu if u got 100% job done try it tell me by post message what about ur prob good bless u

mukesh_thiru said:
I put the phone in triggered bootloader mode. Thanks a lots guys for your qucik response.
For future refernce, this link can be checked for this kind of issue:
http://forum.ppcgeeks.com/showthread.php?p=650429#post650429
Click to expand...
Click to collapse
Wow, you're problem would have been solved on the very first post if you told us your phone was CDMA.

mukesh_thiru said:
I put the phone in triggered bootloader mode. Thanks a lots guys for your qucik response.
For future refernce, this link can be checked for this kind of issue:
http://forum.ppcgeeks.com/showthread.php?p=650429#post650429
Click to expand...
Click to collapse
Wow, you're problem would have been solved on the very first thread if you told us your phone was CDMA. But you didn't think there was a difference probably because you didn't read much beforehand.

Big problem with frozen screen and posible solution dont work, please help me.

First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2

labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?

Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.

For Hard-Reset see sticky "a picture tells a million words"

The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.

labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"

Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.

this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.

boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..

Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks

try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..

dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.

Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???

I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.

try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..

davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.