Develop Bugs

Artemis Touch 3.01 WM6 WWE ROM hard reset

I am having problems doing a hard reset with this ROM on an O2 UK Orbit. I have tried holding in the two sofware uttons whilst restting the device and nothing. There is no 'Clear Storage' icon either.
Short of a re-flash is there any way this can be done?

Try to re-flash your rom...

MaskedMarauder said:
I am having problems doing a hard reset with this ROM on an O2 UK Orbit. I have tried holding in the two sofware uttons whilst restting the device and nothing. There is no 'Clear Storage' icon either.
Short of a re-flash is there any way this can be done?
Click to expand...
Click to collapse
Try:
1. Pressing the voice record/command button on the top left side
AND
2. 'Poke' the reset hole at the lower left side firmly till you hear/feel a soft click.
THEN HOLDING THE VOICE COMMAND KEY DOWN
3. Release the stylet... you can release the Voice key once you see the HTC logo
Hope it works.

have you tried holding the 2 soft keys down, then push the soft reset button, whilsts tsill holding down 2 soft key buttons? it should then show you whether you want to hard reset or not?

Clearstorage is still there - goto \windows\clearstorage.exe with file explorer

meschle said:
sorry not on the forum as dad is ill in hospital
Click to expand...
Click to collapse
Best wishes to you and your father hope he gets well soon.
I lost my dad recently so know where your coming from.

meschle said:
Clearstorage is still there - goto \windows\clearstorage.exe with file explorer
Click to expand...
Click to collapse
Ah, just no icon to stop accidental use!
Thanks!

Revive URGENT PLEASE VERY URGENT

Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye

Anybody help me ?
Please it's very urgent...
thanks all

can you do a hard reset using the keys and see if that allows the device to boot again ?

reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm

Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.

hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.

Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks

Big problem with frozen screen and posible solution dont work, please help me.

First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2

labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?

Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.

For Hard-Reset see sticky "a picture tells a million words"

The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.

labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"

Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.

this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.

boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..

Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks

try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..

dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.

Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???

I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.

try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..

davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.

CE-Star wm2003 version installed on Touch HD ended in screen lockout !

Hi Guyz, Just bought a Touch HD and 1st thing i did was configure a 4 digit password. Since i live in china and Chinese for texting, i went on to try to install a old version of CE-Star (wm2003) on it, installation went fine, finally was prompted to do soft-reset, i did so, and then things went haywire, after coming out of reset the device diasplayed the initial password screen came up, realized that i cannot type in screen (totally un-responsive) and nor clicking on below 4 hardware butons causes any effect. I cannot enter into my device and hence cant do anything, stuck. Both Soft-reset nor even the Hard-reset surprisingly does not work (at wits end to get out of this dilemma, pls help). Pls help to resolve. Thanks.

if hard reset didn't work i think that this means that you have a faulty touch screen!
but i think you have not done Hard reset right,
do the following,
turn off the device
hold down vol up & vol down
press and release (only single click) the power button and wait for the instructions on the screen.
follow the instructions on screen untill the phone reboots.
i hope this will help